Stamp Objects Around A Circle Using Inkscape

[@mzabs1871]

I am broke, like ready to declare bankruptcy broke, but I hope one day to be able to buy your master class to say thank you. For now, I will just continue watching the ads in the hope that it helps you in some small way. You are so easy to understand. Your instructions are so clear. I can't thank you enough.

[@olaff667]

in new inkscape you can also use path effect 'routate copies'. it's non destructive and you can set any number of copies around given point.

[@hermannpaschulke1583]

Thanks! I just wanted to ask how to evenly space n objects

[@nikitamiroschnichenko560]

But how can you do it around the circle? They rotate around themselves

[@olaff667]

@@nikitamiroschnichenko560 you put the object somewhere on the perimeter and move center of rotation (of the 'rotate copies' effect) to the center of circle

[@nikitamiroschnichenko560]

@@olaff667 ok,thanks

[@ade0419]

Teach me

[@RogerioPereiradaSilva77]

I have been an Inkscape user for years and sort of consider myself an experienced user but I am always amazed about how I keep learning new tricks over and over again watching your videos, Nick. Sometimes I do know how to accomplish the same results but rarely as easily - or nearly as accurate - as with your methods. Thanks for your awesome videos and keep them coming!

[@johnnywalker8536]

me too... Great job Nick.

[@andytheantifash360]

Magic again Nick. You are an excellent communicator and we really appreciate the work you put into these tutorials.

[@lawrencedoliveiro9104]

3:13 If you need something other than 15°-increments (e.g. you want 10 copies at 36° steps), the Rotate tab in the Transform panel also respects the offset rotation centre. So basically after you have set up the centre and typed in the correct rotation angle, hit CTRL/D to make a copy, then click Apply to rotate the copy, CTRL/D and Apply again to rotate the copy of the copy, and so on until you complete the circle.

[@boniekjr2945]

Game changer. Big thanks

[@sharafat-karim]

Thanks

[@sweetslice22]

Thanks for that, perfect!

[@motobenbh4722]

I can't believe I just found such a good tutorial on exactly what I want to do. I only heard of Inkscape about five minutes ago! Excuse me while I go download it ...... I'll be back ..... probably a lot.

[@remotejapan2713]

Can never get enough of your tutorials. Your teachings have proved invaluable in my own upcoming project, and it seems you've stepped up your video game as well. Can't wait for the next one.

[@user-cb7uh6ff6l]

2020.11.03 - 15.04'.45'' SUPER! P.S.: Whenever I hear the vignette music coming, I already know that a good thing is coming. It reminds me of my childhood days in the 60s! When I saw LOTS of cartoons!

[@TeeNMugCrafters6092]

Nick you an excellent presenter and a gift to your generation, many thanks as this is priceless

[@daluesca]

Thank you so much Nick, I am learnig a lot !! I don't speak english but I can understad that you teach us. hugs from Colombia, you are the best

[@grandolddrummer]

I'm a woodworker, and this little trick makes it super easy to make clock faces. Thanks!!

[@andrewflores9605]

Love your videos and starting to feel more confident with using Inkscape. It's to the point where I'm saying your next move before you do it lol can't wait to start putting my designs to use!

[@hudaipubgstreamer]

I was just saying why nick is not uploading any tutorials and BOOM then I got the notification!

[@rekhanegi8726]

Very good video . I follow you . I'M a kid of 14 years and I make inkscape from your video. Love you from India👌👌👍👍

[@Filiaris1]

The thumbnail is very high quality looking, wowi. Thanks for the vid

[@hi3508]

Thanks Nick, It is always interesting to follow your tutorial.

[@JadeOart]

Such a good channel. your tutorials are always so clear and easy to follow! thank you

[@buhnee7678]

I'm so happy I found your channel, yet sad I didn't find it sooner. But still incredibly happy :D

[@TristanJPDX]

Dang, this opens crazy doors for me. Thank you so much for sharing.

[@brunel23]

This is a super useful tutorial, I never knew about the snapping to the centre button.

[@kevinnirsimloo155]

Great tutorial as always, thank you. Just made a peacock feather ring. I find them very complementary to your masterclass. It's easier to search for a precise action on youtube and grasp it in seconds once you've acquired all the fundamentals in the masterclass.

[@mr.ahmeed]

I love inkscape more than illustrator because u the best teacher for inkscape ❤ حبيبي واللة

[@navsimmer]

From what I notice, only if you are holding the left click on the object is that the spacebar stamp will work. If you just have the object selected, but no mouse down event (clicking and holding) on it, no stamps are made.

[@imadish5356]

THANK YOU! Was going nuts.

[@serdar4websites129]

Again a very informative video. Despite these showcase videos demonstrate us what is possible with Inkspace, I want to learn more. That's why I am right now enrolling your Design and also Inkspace courses. Thank you for the awesome content.

[@HarshVardhan84]

Perfect. You teach really well.

[@AZskylite]

I like this method. Thanks, Nick.

[@bgrainger3477]

👍💕 Your videos are so great! You always make them so easy to follow and understand. Thank you and please keep making videos.

[@skepticmoderate5790]

This is a superior method to the commonly cited "Pattern along path" tool and the "Scatter" tool.

[@sudrajad4743]

Thanks nick. This is amazing. Please add more simple and tiny trick Like this.

[@unet7292]

Never seizes to amaze me

[@PkBlender]

2:11 "Hold SHIFT and click on it". Thankyou, I was boring to manually CTRL-X and sert "0" in inkscape:transform-center-[x|y]. Thankyou!!!

[@kingblondie7075]

Wow, I learned about 2 dozen things! Thanks!

[@DavenportDecals]

Awesome information!!

[@beer1for2break3fast4]

Always the best information out there. Thank you.

[@efrend.2361]

The great command "repeat" in CorelDraw is great, but this technique is good too.

[@gordonfreeman9942]

I like your tutorials a lot!

[@whotube09]

awesome as always!

[@rumabiswas4296]

Bro your channel is awesome Now have just subbed you and make type of tutorial for us Keep it up

[@teklife]

so cool, thanks nick

[@phillipecw]

O.K. Now this is something I did not know about... Thank you so much!

[@Baniaq69]

You are amazing, thanks for all tutorials 👌🏻

[@MikhailPavstyuk]

Love this. Simple and beautiful

[@dcarchdesign6393]

Excelente tutorial, muchas gracias amigo

[@cbrnix]

Thank you again! You have very useful videos!

[@md.golamtazbi5930]

Wow ! We need more tutorial.

[@tinachris9431]

This is so awesome! Thanks for the explaination!

[@TonyButterworthPhoto]

Fantastic! That is so neat! Thank you.

[@thenabindhakal]

Awesome Nick!! Your tutorials are so refined and on the point that it makes me believe as if I already know how to do it (Even though I haven't thought of it). I have been following your tutorials for years and your way of Explaining ways has influenced how I teach others in real life. Thank you for your awesome tutorials.

[@ladam8303]

there is an arrange command. First, to create a leaf, 1. use pencil and ellipse shape to draw one(or whatever) second, align, 1. keep pressing ctrl+d to copy the leaf until you are tired 2. select all leaves, goto object -> arrange, under rectangular grid, make them stack into either one column or one row, and adjust corresponding row spacing or column spacing, basically you want leaves to line up 3. group the leaves temporarily 4. create a circle with the radius of the alignment 5. put the circle at the center of the leaves lineup group, turn on snap object center to help 6. select all objects, and go to object -> arrange, under polar coordinate, 6.1. since now the circle and the leaves group has the same center, choose either objects' bounding boxes or objects' rotational center, 6.2. set arrange on last selected circle(or the first selected), 6.3 you might want to check the rotate object option 6.4 now click arrange and voila, you have leaves line up around around the circle perfectly

[@douglang2327]

Saw logos by nick notification had to check that out fast

[@carlossc7498]

Great video again!!!

[@AhmedFAyezAbuZayed]

Thank you Nick ❤️

[@zvimelkman4407]

Real informative and pro tutorials. THNX! I was wondering if you could make a tutorial on how to draw mandalas/

[@chubbyboy2242]

Thanks Nick!

[@FabledFrame]

Very useful information!

[@youssefbasiony3919]

Thanks a lot Nick

[@skorecskorec]

Shift+click to re-center...! Oh thank you! 👍👍

[@nikitamiroschnichenko560]

Love this channel

[@joelandalgamboa]

Hi Nick, how to arrange random objects in as tight as possible but with spacing, i will use it to cut individual pieces of the objects so they will occupy a minimal space of material as possible

[@shamirahaqtithi5213]

Thank You, Sir, ❤️🌸❤️

[@jipr311]

Hi Nick, congratulations for you amazing tutorial... could you please link or somehow reference the tutorials that you mention at the beginning of your videos? am struggling trying to find this one with the "transform+paste" in your portfolio with no luck... Thanks!! 😀

[@dg6278]

Absolutely loved the video. I’m wanting to learn how to create simple patterns for wallet making that I can use to cut on a laser. I would be creating a basic rectangular design with rounded corners and adding a pocket at either end and then stitching holes that would line up with both the main panel and the pocket. My question is, do you already have a video(s) that you would suggest just showing those basic things or even better one specific for that? Subscribed! Thanks

[@prime.conselhos]

Blow mind!! thanks bro

[@sharafat-karim]

Cool! Thanks a million man!

[@rifia319]

Thank you nick you are the real hero.

[@kangreviu]

Thanks nick 🙏

[@hbhounr]

Nice work

[@ALLINONEMAHICLASSES]

you know any best free screen recoder laptop sir

[@onesyphorus]

didn't mention leaf once. respect.

[@baslielalene4702]

Thank you very much.

[@thefacts9830]

Can you make a video showing us how to make an esports character, I have been having a lot of trouble making one, It would be great if you made a tutorial!!!!

[@dncreation3617]

Tnx

[@keeponspiral7572]

very helpful ty. is there a way to animate image[or vector image] sequence frame by frame or to review it ??

[@arvenbarkly]

brilliant thank you

[@atwork39]

If I create visiting card and in coral draw in print preview we can click 24 cards at a time by just clicking and also cut mark auto..is any possibility in this software.. thanks

[@indranilkarchowdhury9314]

Pressing ctrl will stamp object with 15 degree increment. Is there any way to stamp or copy the same object at any other angle?

[@LogosByNick]

Yes if you go into Inkscape Preferences (control + shift + p) I believe you can change the degrees.

[@patriciofranciscogonzalez3039]

Fabuloso, gracias

[@shazniw]

so what if i want to replicate a specific number and the same size i want to replicate in a bigger circle same quantity but spaced out as it's the same size? am i making sense? this tutorial was awesome...i've subscribed....will check if your other tutorials answer my question. thanks

[@campingnature1039]

Hi nick, do you know how to pull text or images from a CSV and create multiple images from a template for POD designs. (with Inkscape, gimp, or affinity). Many thanks

[@AjinoARC]

Will you ever make toturial on affinity photo and/or design 😁😅

[@JonForshort]

He has though lol kzbin.info/www/bejne/qpzWnqmobstkbdk

[@LogosByNick]

Yup, already am on my other channel: kzbin.info

[@AjinoARC]

@@LogosByNick and what about affinity photo 😅

[@xCarbonBlack]

Can do a tutorial on how to create symmetrical Mandala in Inkscape?

[@chariots8x230]

I really want to create my own fonts. Can I do that in Inkscape? Are there any Inkscape tutorials that you would suggest for creating fonts?

[@ffogdal]

I use Inkscape right now for logodesign, but thinking of going to illustrator. Are there some advantages using illustrator instead of Inkscape, when designing logos? What do you think? 🙂

[@dewanata_armoon]

better using illustrator for work in studio or company. but in home inkscape or illustrator just same.

[@captaindragonstone8730]

I can't seem to find enable snapping on the latest version

[@creativityexpeditions4582]

Pressing control locks the rotation in a 15deg angle. But what if I want it to be 20deg angle?

[@kannika5531]

thank you

[@sinistergeek]

wow!! This game change for vid Thanks man

[@chitrangadakundu1706]

Thanks a lot

[@cristiangaravito6728]

Thanks

[@martinvlado4621]

The thing I cannot find those options (tool) at to top of ur screen... How to enable them

[@Techonsapevole]

very smart

[@cosinehd1608]

I see in a lot of your tutorials, you have a hexagon tool. but, i can't find it. do you know how i can get it? (or anyone who knows the answer)

[@LogosByNick]

You can use the Stars and Polygons tool to create hexagons. You just have to tweak the tool settings.

[@cosinehd1608]

@@LogosByNick oh, i get it. thanks a lot! yo've really helped me with learning inkscape

[@AzhomNArila]

Amazing tutorial maybe you can take a shortcut key in the screen Nick, thank you From Indonesia

[@andrewpullins8817]

😱 you can Shift click center point and and spacebar to duplicate? 😱

[@SpikeKeystone]

Is there a way to have an image stamped around a circle and have the image rotate a certain number of degrees as each images progress around the circle effectively making a Phenakistoscope ?

[@edwinmoya8282]

How do i put the logo I created on ink space onto my camera roll on my Mac or iPhone

[@elielmayora5202]

PLEASE!! Do a tutorial of how to do a carrousel for Instagram in Inkscape, thanks!!

[@subhajitdutta4106]

Hello Nick, I am a regular viewer of your channel..I have a video idea for u. " CREATE A 3D EBOOK MOCKUPS/COVER IN GIMP/INKSCAPE " if u make a video on this I will be more than happy..😄

[@hedysown]

Hi, I'm pressing space during the rotation but it is not duplicating. What could be wrong? Thank you.

[@Aj-gk1tx]

Can you do a video on how to remove showdows