I cammed my 2023 Escalade V! It sounds SO GOOD!!

My shop Killer Performance finished installing a bigger cam and ported supercharger on my 2023 Escalade V. This is a MUST IMO if you want to mod your Escalade. Its so goooood!
Social media:
Facebook: Stangkilr productions
Instagram: justinkeith_sct
Tiktok: Keithallen
Wear what we wear:
www.killerperformancekc.com
Killer Performance KC
www.killerperformancekc.com
[e-mail]

[@StangkilrProductions]

Escalade V hell yeah!! Should we do the CT5V Blackwing next?

[@numlockkilla]

Absolutely freaking yes 💯

[@numlockkilla]

I'd love to see a blackwing Cadillac engine in a 96 to 01 Olds Aroura

[@erikwyczalek]

Should that even be a question? Absolutely Yes!

[@solder4444]

Hell yea

[@DirtFloorGargae]

Well, he'll yes

[@392Cherokee]

Justin never fails to deliver the perfectly modded vehicle! This Escalade V is on a whole different level….and huge props to Steve for making it happen.

[@StangkilrProductions]

Appreciate your support man! You an OG!

[@bitgriffin9439]

That metal cowl has some nuts and glue holding it to the body. A heat gun releases from the body fairly easy. GM tech here. We take them off all the time.

[@Isaac_GMspecialist]

I always hate taking them off

[@escaladetay8974]

Same here. I pull em off when they spin crank bearings and I have to swap the motor

[@AdrianSanchez-op7sg]

These videos make me want to go in debt to get a V🔥🔥

[@DrizzyDrizz716]

Nothing in this world u can't get out of besides ya death bed...go for it lol

[@brianwhite1087]

I'm getting me one and the color will be caffeine metallic

[@customautomarine]

Sounds perfect, wouldn't change a thing on the exhaust 👌🏼

[@dylanduff9645]

It's crazy how good this thing sounds from the factory 🤤

[@iTrinityPlays]

Probably some hi-flow cats. But literally that's it. Given emissions restricts GM has to abide by. I'd say they knocked the V right out of the park from the factory!

[@2muchBoost_]

Steve is the man. He does great work on all your builds...hats off to you my dude

[@Paul2.4T]

LOVE IT, the dedication the hurdle jumps and the beautiful beast itself, amazing work and persistence

[@83cuttyboa]

I literally work on these V’s at work and I’ve always wanted to see a burnout and them being pushed to the limits but man finally 😂props to you 💪🏼

[@ob707]

Are you usually maintaining or repairing? If repairing what are the most common issues you see?

[@MMM1OO]

Wheels/tires and stance is so dam perfect

[@KM-yh4gh]

That's perfect for that truck. Nowhere near too much for that type of SUV. Love it!!!

[@thestisfrankestein6137]

From all the v8 suvs the Escalade it’s the best it looks so good

[@VisitRwanda7788]

that sound absolutely perfect no less or more chop, for a family car of course

[@ProudPapaw88]

That is one bad ass sounding and running Caddy, Justin! Thanks for sharing!!

[@StangkilrProductions]

Thanks for watching!

[@Kingcadillac816]

Love passing by these shop

[@michaelpyatt9086]

I work at GM Wentzville and the Colorado/Canyon metal cowl does remove. If you remove the wiper arms and plastic cowl you may see the same on the Escalade. Also the wipers motor has to be removed to pull the metal cowl.

[@StangkilrProductions]

Not really saying it can’t but it’s a decent amount of work.

[@ESEALDO07]

Its not as bad as it sounds, specially once you have it off the amount of space you get is crazy! That has to be removed to work on the 3.0 duramax when doing rear glow plugs or other stuff back there, separating the glue is the hardest part

[@classicmandy100]

Yes sir, the cowl comes off with a few 10 mm and rtv sealant, blk if I remember along with the wet windows security and safety visibility contraption

[@chrisholland2016]

For a big SUV that thing is a pure monster, about the only cadillac I like.

[@Cneal83]

I don’t get it trackhawks are still super popular and people will pay crazy money for them but the Escalade v not a lot of people are buying them this will go down just like the cts v wagons after they are discontinued people will want them

[@davehaynes0]

The Escalade is way more expensive than a Trackhawk

[@Defender_Tom]

It’s not a matter of people wanting them, it’s a matter of people being able to drop $160k to get one.

[@briantelander2544]

2 different animals

[@philliplanda8972]

So the cowl does come off you need to separate it unbolt it then when reinstalling use new sealer on the sides that need sealing

[@rajcam80]

Awesome! Sounds great with stock exhaust. If I ever can swap my stock 2010 CTS -V, stock exhaust will stay.

[@thebeddoctor4273]

Does a V have cylinder deactivation? I hate that it kills GM engines. Hoping the V does not. Thanks

[@UncleFjester]

Nothing sounds better than an 8 cyl cammed

[@angelherrera2115]

You never fail to disappoint brother 💪🏽 keep up the hard work man !

[@StangkilrProductions]

Much appreciated!

[@Enrique-rs2vf]

Never fail to disappoint? So he always disappoints

[@ericcarrier5651]

GM tech again, all the lower cowls come off on 19/20-24 GMC/Chev/Cadillac trucks and SUV’s. Once the plastic cowl, wipers arms, few other small things and the wiper motor are out of the way there’s like 12-15 fasteners holding it in and then you have to work the glue appart to separate it and get it off.. the hood can stay on during this process, sometimes taking off one prop strut makes it easier to get it on and off. Most of the engine service procedures on the 1500 LM2’s and LZ0’s diesels (truck or SUV) require this cowl to come off. The glue on some vehicles separates a lot easier then others.. some of the are real stuck on haha.

[@ericcarrier5651]

If you have an email address I’ll send you some pictures of a vehicle when we have one appart for service !

[@Ferrari360Spyder]

Good job Steve, genius work!

[@KevinSierra-p9t]

That’s perfect not too exaggerated just right amount of Power & sound 😮‍💨🔥🔥

[@frankcedeno5467]

That’s soo sick out of my league but What’s the offset on the wheels

[@FreeWorld310]

Thanks for the smiles today !

[@otek42o]

that behind the V shot, listening to that exhaust note.... if you don't have a big grin on your face, WHO EVEN ARE YOU? WHY ARE YOU HERE? lol

[@beaumont9072]

America 🇺🇸 💪🏼🦅🤷🏼‍♂️🛠️ I live here in good old Texas. We love our freedom and our horsepower, but my fiancé is district sales manager of all the Cadillac stores here in Texas America. 🇺🇸💪🏼🦅🛠️

[@wendymariep2580]

Fuk yea now we are talking that’s sick ❤

[@mackharris6536]

Holy shit that thing sounds bad ass I’m for sure saving up for a Escalade V and a cam

[@keithphillips6111]

Very cool Justin. Badass school bus!!!😮

[@mhousto20]

Yes. CT5 Blackwing should be next.

[@johnherron2009]

The cowl comes out it just has sealer that is supposed to be cleaned off and new sealer applied when reinstalling

[@StangkilrProductions]

Sounds like a pain in the ass

[@johnherron2009]

@@StangkilrProductions it’s not fun! Have to do it to work on Chevys 3.0 liter diesel motors

[@ATS-VRACING]

Correct the cowl has some 10 mm nuts/bolts, and then you have to pull on it to break the seal. Some come right off. Some are harder. But it takes like 10/15 minutes max to do this vs, struggling for hours to get the rear sc bolt and what not out. I pull the cowl off on ats-v, ct4-v bw, and the escalade v's when I work on them. The ct5-v blackwing I don't do this to as it has lots of room all around the engine.

[@Entreepreneurs]

Kooks long tubes next please 🥺

[@StangkilrProductions]

No sir! Want to keep it quiet

[@toreymiller]

What size wheels are those? They look great…

[@MoonBoost]

Stage 1 cam is plenty. Have it in my ZL1 build and drives great with the stock convertor.

[@stevensarasin1663]

I’ve got a V hoping to do the cold air, porter blower, smaller pulley and tune. It definitely lacks mid range etc needs more power. How big of a difference did you notice after doing all of this?

[@riderhd5545]

Never was a caddy guy but man that thing is sweet😮

[@tiptop1263]

Not to be rude but is this the same guy who sold an OBS to ondgas

[@zacharymuroff7895]

Can you provide a link to the exact wheels that are on this Escalade.

[@MegaRetr]

Escalade V yeah 👍

[@SCKOOBY94]

What percent tint are these, I want to do mine just like this

[@alfredoespinoza94]

I got 2002 4.8 how much do you charge to do half rebuild for the engine chevrolet discount the engine

[@Lou_sassel315]

I wish I could afford an Escalade V lol. I might just turbo my 07 Escalade as a cheap substitute for now

[@irving263]

Maybe for do burnouts you need the little connector for obd2 that rest of people use on the trx

[@StangkilrProductions]

I wish they made those for GM vehicles. They don’t though :(

[@kolbyhumbert2680]

What’s the shop book for hours for a cam swap on these new LT engines? Compared to LS

[@paidkillz2822]

We are your Internet experts but that don't help I agree bro 🎉❤ love the vids bro keep doin the Gm rides yessir 💯

[@jefe7768]

What wheels and tires are you running and what suspension drop?

[@bjso_ill7944]

Wow that sounds amazing‼️‼️

[@tumtum08]

Every video of the V I watch I want it that much more lol. Just need the ESV for the kids lol

[@Funky.P0V]

You have one nice collector item!

[@steelers19727]

Will you have anything for a 2024 Ford Explorer ST???

[@djemsjeremy3885]

Hello, could I know what is the make and model of the rims please?

[@AndyMrno]

It dose come off i done plenty of em it is glued but will come off

[@TravTooThurl01]

The new “CTS V wagon”

[@derekmorrison4239]

They thing is NASTY 🔥🔥🔥🔥

[@jackiegregory6167]

I believe that transfer case is only allowing 70% to rear 30 to front or maybe that's the older style and when u doing a burnout possible the traction control or stabilitrak is not seeing the front wheels moving is Why idk 🤔 but still rad asf I got to see my first one at the local grocery store the other day in 8 inches of snow lol low an behold Kane brown was driving it lol 😆 sweet ride and vid my guy frfr

[@wendymariep2580]

There’s a guy on instagram who does burn outs with Escalades

[@hasanaldhwaea1052]

Did you bleed the radiator or you forgot it?

[@MrJoeygettinmoney]

What wheels are you running on the V

[@xforce687]

I thought AWD transfer cases don't like running without a front driveshaft?

[@StangkilrProductions]

These do

[@xforce687]

@StangkilrProductions Okay, can't wait for the next video!

[@Phenom305]

How much is this upgrade? Does this void the warranty?

[@viixiconik]

This in blue springs mo?.. thought I saw brass Armadillo by the highway. Might come through for a cam.

[@StangkilrProductions]

Grain Valley

[@viixiconik]

@@StangkilrProductions awesome!.. show me state.

[@Yeffy_5.0]

Will there be an exhaust set up for this beauty?

[@StangkilrProductions]

I prefer the stock exhaust

[@jeffclayton9968]

Hell yeah brother!! Dew it for Dale!!!

[@OSCARRAMIREZ_RR]

Need information to get my escalade v cam

[@SB-yu7hl]

Can’t wait for dyno footage and all she’ll drive action.

[@noahsmith7900]

We need a video of it against a track hawk!!

[@turkishwarriorr1]

Love your videos bro

[@ChaklitTea]

I can see the scene tilting like its about to takeoff

[@BenjySparky]

Justin, y'all rock! Peace ✌️

[@valleymade9563]

Tune her up she will get choppier & maybe a corsa exhaust ? 👀

[@Fee-i7r]

These about be the next hell cat

[@jashawncraig9225]

Where they went to school at

[@MR2Josh]

Any cowl comes out with a sawzall

[@adancarrillo1011]

When will the hats be added to the website

[@afitgamer]

Sounds like my Jaguar XFRS 😊

[@haydenroyer]

I wish ondagas would show the trucks they bought off you rippin

[@jlorenzo4355]

People in the comments REALLY wanna see that cowl off for 2 bolts 😂

[@AlbertLazalde]

What kind of wheels are those? Sounds awesome

[@StangkilrProductions]

Velgen

[@Clarkro]

Does anyone on your team know why my 2017 Escalade makes a single chime every time I come to a complete stop? I can’t figure it out 🤦‍♂️

[@serrk50]

I would get the AWD working or buy new back tires every week

[@shewantsthezeee]

God that thing is so sick.

[@bryansilkwood8604]

That Shelby should be a factory five kit car and if it is, they are very good quality

[@StangkilrProductions]

It is!

[@chevyboy9988]

How much power did it put down?

[@cordellharris2866]

Steve is the 🐐

[@sneakerhead4770]

Sounds good but I was hoping for a harder chugg

[@theicedmann]

I believe on the CT4 and CT5 Blackwing cars the cowls come off but not the escalades makes it so much easier sucks these don’t get that

[@Carson_Youtube21401]

im taking this over track hawk any day lol

[@michaelcrowson]

Love it, guys!

[@locochon9566]

Thats a badass suv v 🔥🔥

[@Overpar73]

Very nice job Steve!

[@JL-it9wo]

Because of the channel name I subscribed.

[@frankienieves5124]

Will u be selling this Escalade v in the near future

[@stevensarasin1663]

What’s the hp now?

[@KingRen420]

SMoked 2 of these already in my hellcat durango lol

[@justloko5292]

How would you make the blower super loud without having to mess with a ton of stuff

[@StangkilrProductions]

Really no way to make it louder without added a tune required intake or pulley that would require a tune

[@Funky.P0V]

I need to make some money moves in 2024 😅