Starlike® EVO - The most advanced epoxy grout on the market for grouting joints

Highly aesthetic, easy-to-apply epoxy grout for grouting ceramic tiles, porcelain stoneware, natural stone and mosaics.
Ideal for use in residential, as well as commercial and industrial settings, thanks to its aesthetic appeal and excellent resistance. Suitable for direct contact with foodstuffs and resistant to aggressive, chemical products. With ultra-low volatile organic compound (VOC) emissions.

[@TRC714]

Will the light colors yellow over time?

[@LitokolGroup]

Good morning, The Starlike EVO epoxy grout is resistant to UV rays, the main cause of yellowing of joints, thus preventing color variations even in lighter shades. Regards, Litokol S.p.A.

[@karolinakos1558]

Hello, I am considering Starlike grout for bathroom but I worry a bit about one thing - is it safe to use it for 60x120cm rectified tiles with water floor heating/close to radiator? Is there any risk the tiles could crack if heat puts stress on the grout?

[@LitokolGroup]

Good afternoon Karolina, Certainly, Starlike EVO is suitable for applications on heated floors, thanks to its high performance it has excellent resistance even in the most severe conditions of use. For more information on the product: www.litokol.it/en/products-to-grout/367-starlike-evo.html Best regards, Litokol S.p.A.

[@sheryltunnecliff2999]

Hi, Can the Starlike EVO be purchased in Australia? I am after the Travertino colour but I can't seem to find it anywhere in Australia. In addition, I want to know if it would be suitable to repair the gap between the underneath of the coping tile and the top of the tiles of the pool. The laying of the coping tiles was originally completed with a concrete-type product. Over time this had deteriorated and has chipped and looks awful. My thought was to cover this with a grout that would be more resistant.

[@LitokolGroup]

Good morning Sheryl, Of course, Starlike EVO can be used for the application that you have described, if in the realization you also need an elastic joint we recommend, in combination with Starlike EVO, our silicone sealant Ottoseal S70. You can find Starlike EVO in Australia at SAS AUSTRALASIA PTY LTD - UNIT A2, 152 MILLER RD, 2162 CHESTER HILL, NSW. Mr Waseef - email: [e-mail] Best regards, Litokol S.p.A.

[@AppleOranges12]

What is the mixing ratio if I only want to use half a tub?

[@LitokolGroup]

Good morning, The mixing ratio of Starlike EVO is about 94 parts of component A (paste) and 6 parts of component B (catalyst). Best regard, Litokol S.p.A.

[@saulbarrera1997]

Can I possibly use this as a self leveler over old tile since it is translucent ?

[@LitokolGroup]

Good morning, Starlike EVO does not provide for use as a self-leveling product, to see all the application possibilities visit bit.ly/3REXj5l or look at Starlike Decor for application as a decorative smoothing compound bit.ly/3g1XZzE

[@melocarina]

Hello, I have a question I just bought starlike epoxy grout and I didn’t need my walls done so now that I’m ready for grout there’s a gap between the new floor and the wall. Should I use the starlike epoxy gout in the space??? (about an inch) Thank you so much!

[@LitokolGroup]

The Starlike epoxy sealant is suitable for grouting not exceeding 0.59 inches, therefore, it isn't recommended for greater sizes. Best regards, Litokol S.p.A.

[@sdpkes2524]

Can this be used for clay tiles?

[@LitokolGroup]

Good morning, Thank you for your interest in our products. For any information regarding our epoxy grout Starlike EVO, please contact [e-mail]. Kind regards, Litokol S.p.A.

[@kayjay9071]

Are there stockists for litokol translucent epoxy grout in the United Kingdom? Thank you.

[@kayjay9071]

I mean the starlike clear. No colour one please.

[@LitokolGroup]

Good morning, You can find Litokol Starlike Crystal EVO Translucent Epoxy Sealant at "Nicholls & Clarke" - Nicobond dealers ( www.nichollsandclarke.com/nicobond ). For more information or curiosities about our products do not hesitate to contact us. Greetings, Litokol S.p.A.

[@DesiBelSound]

Can this be used on fibreglass pools?

[@LitokolGroup]

Good morning, certainly, Starlike EVO can be used as a grout sealant for fiberglass swimming pools. We recommend Litoelastic EVO for the adhesive. Best regards, Litokol SpA

[@teb6278]

Can the starlike crystal evo also be used as an adhesive?

[@LitokolGroup]

Good morning, Starlike Crystal EVO can only be used as a grout, it cannot be used as an adhesive as it is possible with Starlike EVO. Best regards, Litokol S.p.A.

[@teb6278]

@@LitokolGroup thank you!

[@aleksandrk9367]

Пропорция какая , если я не собираюсь сразу всё ведро размешать ?

[@LitokolGroup]

Good morning, To avoid mistakes, the advice is always to mix the whole bucket, in case you want to make smaller proportions you need to use a scales and the proportion is 100: 6.7 or 1000 gr part A + 67 gr part B. Best regard, Litokol S.p.A.

[@texasred2702]

Do not use this product if you're not experienced with epoxy and working by yourself. The mixing process is exacting and might be confusing for a homeowner, and it's expensive and dries really fast. Once it's dry, it's part o f your tile whether you like it or not. If you screw up or don't wipe it in time, your only choice is to remove the tile and start over. The results are very nice but unless you're prepared to spend the money on additional product to practice on, hire a pro.