Starlink installed on our Standing Seam Metal Roof. And Solar Street Lights in our parking area.

[@TheMetalRoofingAcademy]

Great install. Thanks for using our clamps in your project.

[@breakheartorchard4761]

I just ordered a bunch more to install the snow splitter for my Chimney.

[@byrdman662]

You may want to put a rain loop on that cable before it goes into the attic.

[@aaronmdjones]

This. You definitely want a drip loop. You're also going to have to unplug it to route it through your siding when you get around to that, so don't make it permanent yet.

[@Off-Grid]

I knew you'd go Off-Grid...lol! Might have to buy one of those for back at our barns.

[@breakheartorchard4761]

They are really convenient. I like the 3-6 hour setting. 3 hours after dark in the summer and I am usually inside. Winter I may stretch it out a bit but it’s nice to have the lights go off at night and have the darkness of the country.

[@Off-Grid]

@@breakheartorchard4761 I agree, our lights are always off at night. The animals tend to come closer to the house that way and we can really see the stars. Our next video has a very large buck that came up close to the house.

[@rjb77]

LOL. I love the "out-takes" at the end of your video's as well as the once in a while QUACK. 🤣🤣🤣 I have a few LED motion lights much smaller than the one you're using. The work great for my much smaller area around my place.

[@edbenedicto]

To cut the corners off the top of your 6x6 post, set your circular saw at 45 degrees and cut the post off. Cheerio.

[@edbenedicto]

Takes four cuts.

[@anitabirrer7076]

Thanks for your videos. It is intetessting to watch them. Thake care and have fun 😊

[@simonthomas2042]

Thanks for the link to Hyperlite. Took advantage of your promo code on a pair. Keep up the good work.

[@breakheartorchard4761]

I hope you like them. We are very pleased. I love how they shine down instead of out like a flood light. Less light pollution.

[@dunep6465]

Those lights look nice. I'll keep the link for when I'm putting some exterior lighting up. I'm using those S-5 clamps also to attach the solar array to my roof. Good Stuff

[@mlm7598]

All is looking great! So excited for you guys!! Blessings

[@AnxiousIRL]

Those solar lights are awesome

[@breakheartorchard4761]

Metal housing. Very solid construction.

[@joequixotic3039]

I think the best solution for making a post look finished is a metallic fence post cap. They are available plain to fancy and prevent water from absorbing in to the end grain. They might even keep it from splitting. I want to do that on a rustic shou sugi ban fence along about 500' of property line but that's a big expense unless I can find cheap salvage wood that looks nice.

[@woollybully]

Great job with the sponsored material. I hope you get many more sponsors.

[@kathyk9519]

Kudos to you for getting on that roof! Yikes! Glad its done for now. I love those lights you got and are using!

[@milt7348]

Stay safe

[@gdvan01]

looks good!

[@breakheartorchard4761]

Thanks. Using it now and very happy.

[@lilo7019]

thanks for sharing great video

[@johnjaco5544]

I sent mine back it kept dropping signal and froze up in the cold and would not tract the satellite.Hope your luck is better.

[@breakheartorchard4761]

Ours has been great. I hope they replace it quickly for you.

[@johnjaco5544]

@@breakheartorchard4761 No I don't want a replacement,I'm getting my money back.You will find out your online for a while than it drops off,than your back on.This is not gonna work for what I need it to do.

[@wallaceloper637]

You could have turned the light mounting bracket to have more wood to drill into. just saying

[@breakheartorchard4761]

If you turn it, the light goes to the side.

[@JD-xo3xz]

Just found your video. Good info. How did you determine what clamps to get, and where di you buy the kit from? Thanks.

[@breakheartorchard4761]

Buys-5.com. S-5 brand clamps. It depends on the roof style and seem size.

[@josefreck1103]

👍😉🤗

[@blackwolfacres2759]

When placing the Starlink antenna in the pivot mount, it appears there is only one way it clips in. How do you rotate the dish to face North if the slope of my metal roof is East and West?

[@breakheartorchard4761]

When you turn it on, it will face the nearest satellite. Just get it mounted solidly with the mast straight up and down.

[@blackwolfacres2759]

So the dish can turn on the post?@@breakheartorchard4761

[@suenorton873]

😉

[@chucklogan9611]

Foam those holes so wasp don’t get in and make their nests!!

[@breakheartorchard4761]

As Jefanna said while working yesterday. If you leave a centimeter, the bugs will crawl into it.