Starwars AT-ST print and build by FAB365

[@glenn_r_frank_author]

It always amazes me how your models are printed to go together so amazingly well! The engineering to create those models is incredible... and this one especially is mindboggling how you were able to interpret the design and build it in so many snap together and glue together ways!

[@fab365_official]

Thank you so much for your watching and comment!!! I hope you enjoy~

[@fendyranger4081]

You know it's a good model when the "chicken walker" is able to stand on its own. Your prints look solid i wonder how much infill you used. Great work. Love your channel. 👏🏼👏🏼👏🏼

[@Slaintemaith]

Having printed a AT-ST with "normal" infill (a different model, not the FAB365--I've not printed that yet) and having heard it collapse under the strain of itself, you want to give it the ability to support its own weight. This model is smaller, but sexier because of the articulation. Where were 3D printers and genius designers when I was a kid!?

[@tgviscool]

Nice printing man! ❤🎉

[@fab365_official]

Thanks for watching! Please enjoy~~~~

[@tgviscool]

@@fab365_official i have

[@alejandroc1891]

awesome model!! thank you

[@fab365_official]

You are welcome~ Please enjoy! 😁

[@AndreiAndrei-io7nq]

Браво Очень хорошая работа Полный восторг

[@fab365_official]

Thanks for watching and comment! Please enjoy~

[@ripmax333]

Amazing! I Wish you could make some old anime robots like Jeeg Robot and Mazinger too. Your models are amazing!

[@Mona8519]

Very nice! What sort of glue do you use?

[@fab365_official]

I use this glue. www.shop.fab365.net/loctite

[@Mona8519]

@@fab365_official thank you!

[@dankron_]

Had some dramas with the legs, snapping the tabs that connect to the body, and stuff not setting properly, model looks awesome, but I'll have to re print a few parts again... no big deal... joys of 3d printing, easily get new parts done...

[@TJoker---]

What color PLA is this? It is the perfect color for this print.

[@fab365_official]

Light grey PLA.

[@TJoker---]

@@fab365_official Thank you!

[@SilvioBolso]

excelente Excellent. Which slicer do you use for the Ender printer?

[@andrejburke]

Love to see an Ed-209

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@Giefmindscape]

What type of filament did you use for this color? Also is this PETG or PLA? Thanks!

[@fab365_official]

I used PLA.

[@jamesmason7124]

What about designing a commander with binoculars and pointing somewhere , for the top hatch

[@k3v3nt]

Impressive.

[@fab365_official]

Thank you! Please enjoy~

[@TheSirBlackbird]

Superbe travail ;)

[@fab365_official]

Thank you~ Please enjoy~

[@USAOFFICIAL4]

Nice printing, but what settings like the filament and stuff?

[@fab365_official]

Visit link page, you can see my settings.

[@USAOFFICIAL4]

@@fab365_officialI’m using a PETG printer and Cura slicer. It doesn’t show on your page so I was just wondering.

[@Jonnyorlando7]

Bro your prints look amazing.. are you printing with a .2 nozzle? What are your print settings?

[@fab365_official]

I use 0.4mm nozzle. I wrote my settings in this item page. Please check the link.

[@FNMClips910]

What glue do you use and where can I get it? Edit: my bad I saw the other comment face palm 🤦‍♂️

[@pierreboone568]

very nice...

[@fab365_official]

Thanks! Please enjoy~

[@renanfelipe4966]

Is the model in the video larger than the model in the file? I'm printing it and it looks smaller than in the video

[@chzuniga1]

Hello, what type of glue do you use?

[@fab365_official]

I use this glue. www.shop.fab365.net/loctite

[@memphisbelle171]

how do you manage to get zero stringing

[@fab365_official]

There are many instruction videos for reducing stringing. I watch them a lot and apply to my printers.

[@FrancisBentoMarques]

👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@fab365_official]

😆😆😆😆😆😆😆

[@sierraecho884]

Great design but I am kind of disappointed about the openings in the "eye´s" you should have made them hinged with small ball snap fittings instead of gluing them then. First they will break off and second you can´t change their position.

[@mikehammer7419]

Disappointed? In the guy who took the time to design this and give it away for free? You could take those pieces into one of the many free cad programs and modify them to do as you wish. Don't have that skill set or just too lazy? Then just say thank you and move on.

[@sierraecho884]

@@mikehammer7419 No, Disappointed in the little design flaw. I could, I could also design it from scratch, but I won´t do either for obvious reasons.

[@mikehammer7419]

@@sierraecho884 Right. Enlighten us and provide us a link to some of your design magic. No excuses now.

[@sierraecho884]

@@mikehammer7419 Lol it´s funny that you mention it because I am a professional CAD designer and mech. engineer. I design automotive parts. Unfortunately I can´t share "my designs" because they don´t belong to me but to our clients and my company. You know you should never assume shit about people who you don´t know online. But you are right in one regard, even though you didn´t say it that way, you said it in a little more cunty way, I am probably over critical of design flaws of other people´s designs because it´s basically my job. I probably have a different perspective. But maybe on the other hand you could taken my criticism to heart and learned from it instead.

[@mikehammer7419]

@@sierraecho884 How did I know it would be excuses? Thanks for playing

[@zion.3362]

I hope you make a PUMA or m3 bradley ifv! Would be awesome!!!

[@Alex_entretenido]

Friend, could you make a Toyota supra mk4? 🥺

[@fab365_official]

Please vote for toyota supra mk4 request. fab365.net/requests/3512060013/Toyota_Supra_mk4_supra_mk4_is_most_wanted_jdm_cars_among_the_car_enthusiast_ Thanks~

[@Alex_entretenido]

@@fab365_official I love you

[@lonniesides9302]

What scale is this model?

[@fab365_official]

Please check description. Thanks~

[@reubenguttenberg7405]

From empire strikes back and return of the jedi

[@pandjiarsyasetya235]

I have manage to use at st first order in star wars battlefront 2 2017

[@convergencia333]

You shouldn't glue the last part. 😁

[@fab365_official]

Really? 😅

[@rhotix403]

2 walls is too less. Many parts are just breaking away. I suggest 3 and raising the infill to 20-25%