Really helpful video, I am wondering how can I simulate a case where you are charging the battery as well as providing to an additional load in parallel. For example running other loads while charging the battery.
@ahmadbariqalfahri93723 жыл бұрын
Thank you so much sir, you really help my college assignment. Keep up the good work
@TheUrbanScholar3 жыл бұрын
Thank you Ahmad! Do consider subscribing to our channel!
@gauravdubey458710 ай бұрын
thanku so much
@rohandeokate31185 ай бұрын
Sir can you please give the path of library from where you have selected the battery or are there any addons that need to be added
@hamedkamali12933 жыл бұрын
Hello sir thanks for sharing youre job
@muhammadasimkhan80412 жыл бұрын
my scope is not showing the curve.. what should i do? the overall circuit is perfect
@rutwikshivankar64388 ай бұрын
hey ! My simulink is not showing the litium ion battery ...how do I install lithium ion battery library then?
@IST3723 жыл бұрын
Excellent. Is it possible to make a battery circuit from the beginning? For example, how can we make the 1RC Thevenin Circuit of the Battery? Can you make an example especially with parameter detection? I would appreciate it if you do Positive / Negative Feedback Thank you.
@TheUrbanScholar3 жыл бұрын
First of all sry for the late response 😔 We'll definitely do this in future for you we saw your mail as well, stay tuned 😉
@IST3723 жыл бұрын
@@TheUrbanScholar I'm looking forward to the videos or e-mails from you. I requested this subject from you within the scope of my master thesis project. It would be great if you have an example with PSCAD other than MATLAB or if you can simulate the subject I have expressed with PSCAD. Thank you very, very much for your return. Good work.
@ihsanbayu96993 жыл бұрын
at the minute 03:05 , I was unable to connect the goto and from to the chart port. There was no port at the chart, how can it be? Would you like to help me? For the information, I used MATLAB R2016a version
@masihaaijaz58404 жыл бұрын
Please do a video on CC-CV charging of Li-ion based on SOC. Please
@TheUrbanScholar4 жыл бұрын
Click on the bell icon, we'll do it in a week :)
@masihaaijaz58404 жыл бұрын
@@TheUrbanScholar done!
@TheUrbanScholar4 жыл бұрын
Check the new Video! Part two will come on the weekend!
@TheUrbanScholar4 жыл бұрын
As per your request 🙂
@masihaaijaz58404 жыл бұрын
The Urban Scholar So grateful ! Eagerly waiting for the next part
@tonycastillo82103 жыл бұрын
Interesting video, but I wonder that sort of batteries does not work in phasor, only in discrete or continuous, for phasor mode what do you advice?
@TheUrbanScholar3 жыл бұрын
Hey! I haven't really tried using batteries in phasor mode. Does it not work?
@tonycastillo82103 жыл бұрын
@@TheUrbanScholar oh what a fast response, thank you. No, it doesn't work in this mode. The battery you performed in this video is my first option when I want use a battery
@TheUrbanScholar3 жыл бұрын
Haha you're welcome. If it doesn't work in phasor mode I would suggest you to do an equivalent model of a battery instead.
@tonycastillo82103 жыл бұрын
@@TheUrbanScholar if you don't mind suggesting it now, please do it.
@TheUrbanScholar3 жыл бұрын
What do you mean?
@nelsondarwinpaktech39543 жыл бұрын
good work sir..........
@TheUrbanScholar3 жыл бұрын
Do subscribe if you liked our work :) Thank you!
@alfandiwicaksono81463 жыл бұрын
Thank you sir, it is nice information
@harshjaswal37813 жыл бұрын
Hey man, love your videos, Big help. Can you make a video regarding the demand side management of a microgrid that stores excess power from the utility and gives back power to the grid during peak load hours using a neural network?
@nitikapanwar87043 жыл бұрын
can we perform the SOC estimation of a battery module in a similar way by adding more number of batteries in series?
@TheUrbanScholar3 жыл бұрын
Absolutely, but you'll have to find out the cumulative soc
@nitikapanwar87043 жыл бұрын
@@TheUrbanScholar you mean the SOC of the entire battery pack right?
@TheUrbanScholar3 жыл бұрын
Yess
@nitikapanwar87043 жыл бұрын
@@TheUrbanScholar ok..thanks a lot for the help 🙏👍
@TheUrbanScholar3 жыл бұрын
Do feel free to contact us any time :). Help us by sharing with your friends!
@shivantanukumarshiv76613 жыл бұрын
Sir can we control the SoC of battery by PI controller please reply
@TheUrbanScholar3 жыл бұрын
Yes you can!
@VENUGOPALD-om1vl Жыл бұрын
i am facing trouble while charging battery i.e. SOC decreases instead of increasing.......i couldn't get the output that u defined with this model.......could u plz help me out.......
@YounessHakam Жыл бұрын
You are great man
@adibkamali55854 жыл бұрын
I have measured data of battery, how to make a Simulink model using that measured data? I will be glad to watch your video about that thank you
@TheUrbanScholar4 жыл бұрын
You can do a mathematical model of the battery since you already have data of the battery
@krimzlelou19263 жыл бұрын
@@TheUrbanScholar how please ?! can you make a video
@masalem76974 жыл бұрын
THANKS FOR SHARING UR JOB
@TheUrbanScholar4 жыл бұрын
Kindly do subscribe for much such videos :) share it with your associates as well
@kumarrishabhrajput37823 жыл бұрын
Sir can I use it for fast battery charging simulation, because it is my project , please response sir🙏
@TheUrbanScholar3 жыл бұрын
Sure
@TheUrbanScholar3 жыл бұрын
There's another video of battery charging, see that.
@kumarrishabhrajput37823 жыл бұрын
Sir please sir contact me personally for project I need your help
@kumarrishabhrajput37823 жыл бұрын
Sir I have to project on fast battery charger sealed lithium acid battery
@chaitanyapanse62223 жыл бұрын
Suppose of I have to find the over-all current of the entire battery pack what could be the possibile circuit?
@TheUrbanScholar3 жыл бұрын
First of all sry for the late response 😔, I didn't get your question could you explain it better pls so that we can help you 😄
@chaitanyapanse72053 жыл бұрын
@@TheUrbanScholar i am sorry i am reframing my question what could be the circuit arrangement for finding out continues current for the battery pack?
@TheUrbanScholar3 жыл бұрын
You'll need an ammeter ( current measurement block) in series with the battery, hope this helps
@mjmanju983 жыл бұрын
Sir,What are the specifications for li ion battery to get smooth curve as we seen in video
@TheUrbanScholar3 жыл бұрын
No no its a POC it hasn't been designed
@arghyamu7 ай бұрын
not gating proper output at scope. plz help.
@samuelameiza-djabli23503 жыл бұрын
Great video man💯 Just got one question, how do I make the charging and discharging sequence continuous?🤔 Because with your model, it just remains constant after 150s
@rockingstone77003 жыл бұрын
bro did u get your answer??
@beablessofficial Жыл бұрын
Any help on this please. Why does it remain constant after 150sec
@masalem76974 жыл бұрын
I am asking if I used MOSFET or IGBT instead of the ideal switch, is it possible?
@TheUrbanScholar4 жыл бұрын
Absolutely.
@lebnankam35703 жыл бұрын
How do you find the Li-ion battery state of health?
@TheUrbanScholar2 жыл бұрын
I'm not sure about this unfortunately
@smartknight72243 жыл бұрын
Sir I am charging a battery from one battery to other based on SOC between batteries.. I need help how can I do that with a converter in MATLAB SIMULINK.. Please help
@speedyindian9 ай бұрын
What all addons are required ?
@khennuhfussanjaya23254 жыл бұрын
Sir, if u can help me.please do a SOC estimate using fuzzy logic w considering temperature effect please.. Thank you verry much!!!
@TheUrbanScholar4 жыл бұрын
Hey Nuhfus, sorry for the late response. We seek to add to our collection of technical videos. For sure we'll do this in the future. Stay tuned!
@chandamrutiya77793 жыл бұрын
Hey, I am unable to connect from soc block to chart...I am using MATLAB 2013
@TheUrbanScholar3 жыл бұрын
Sry for the late response 😔, Download state space extention on matlab and it'll work, hope this helps 😄
@m.fazazidnalmuna82313 жыл бұрын
@@TheUrbanScholar can you show me how to download state space extention sir, i have the same problem is unable to connect SoC to chart. Thanks
@rajat37443 жыл бұрын
how to implement this in a real environment? what al components are required?
@korotkie_lapki_raptora44132 жыл бұрын
What library it is and where i can download it ?
@TheUrbanScholar Жыл бұрын
You can download on simulink, search for matlab battery on Google.
@akashchakraborty39332 жыл бұрын
can you implement the same model using simulink basic blocks if yes please help
@TheUrbanScholar Жыл бұрын
Most of these blocks are standard and basic :)
@nandhinibabu5334 жыл бұрын
thank you so much for this video
@TheUrbanScholar4 жыл бұрын
You're most welcome! 😁
@nandhinibabu5334 жыл бұрын
may i know the matlab version you used here.
@TheUrbanScholar4 жыл бұрын
Matlab 2020a
@GauravNvidia3 жыл бұрын
how to do SOC control in bidirectional converter ?
@TheUrbanScholar3 жыл бұрын
Kindly watch the CC and CV sharing of battery in our previous video, and provide the same SOC condition, hope this helps 😁
@GauravNvidia3 жыл бұрын
@@TheUrbanScholar Thank you.. I will try and surely let u know.
@GauravNvidia3 жыл бұрын
I m getting confused how to design bidirectional converter with soc control
@TheUrbanScholar3 жыл бұрын
Pls mail us at howtoproject98@gmail.com to help you better,as this is a small space to write answer🙂
@smartknight72243 жыл бұрын
@@GauravNvidia sir did you get the idea.. Please help me.. I'm in same condition too
@factsdot31694 жыл бұрын
please do workk on electrochemical model of battery
@TheUrbanScholar4 жыл бұрын
Sure we'll make a video on this in future but make sure to subscribe and click the bell icon to not miss out 😉
@sivaleeladokku54162 жыл бұрын
Sir which version of matlab used
@TheUrbanScholar Жыл бұрын
You can use 2019 onwards
@AdilAslam692 жыл бұрын
I am getting error that Output port of ideal switch is not connected 🙄
@izzattyshahrom26253 жыл бұрын
sir, can we use this simulation but we just include the charging part only? look forward for your response thank u 😊
@TheUrbanScholar3 жыл бұрын
First of all sry for the late response 😔yes you can use only charging if you wish. You will have to slightly modify the logic, hope this helps 😃
@izzattyshahrom26253 жыл бұрын
The Urban Scholar ok noted, thank u sir 👍🏼
@raguramshivakarthikeyan88744 жыл бұрын
Asks that input port 1 ( m terminal ) needs to be connected bro
@TheUrbanScholar4 жыл бұрын
Watch again and make sure to follow the steps shown in the video, you won't get any errors.
@hamedkamali12933 жыл бұрын
I have this problem like you!!!! ////Output port 1 Ideal Switch' is not connected.////
@rajat37443 жыл бұрын
@@hamedkamali1293 its just a warning
@TheUrbanScholar3 жыл бұрын
These are just warnings
@YuvrajSinghYadav-y4v11 ай бұрын
Why it is constant after discharge
@411-tulasirammudavathu57 ай бұрын
tanku bro
@100_trades3 жыл бұрын
Can anyone please share me this simulation file.....its very urgent as I have exam tomorrow.....It will be a great help Thank You
@TheUrbanScholar2 жыл бұрын
Sorry for the late response! All out simulations files are on Matlab file exchange :) check them out there!
@soothingmusic48773 жыл бұрын
Bro, there was an error from clock Can i reslove it
@TheUrbanScholar3 жыл бұрын
Hey! Hope you're doing well. I'm assuming you're asking if we can resolve it?
@soothingmusic48773 жыл бұрын
@@TheUrbanScholar yes
@soothingmusic48773 жыл бұрын
@@TheUrbanScholar I got issue with ideal switch output port
@TheUrbanScholar3 жыл бұрын
What the issue?
@TheUrbanScholar3 жыл бұрын
You could mail us the issue of you've got a problem :)
@manjunathak70403 жыл бұрын
Hi can you send me that simulation file
@TheUrbanScholar2 жыл бұрын
Google : Sankarshan Durgaprasad: the file is uploaded there :)
@mustafamoose59253 жыл бұрын
hey sir, can i get your email , i need some modification for this simulink
@TheUrbanScholar3 жыл бұрын
howtoproject98@gmail.com
@mustafamoose59253 жыл бұрын
@@TheUrbanScholar check your email please
@mustafamoose59253 жыл бұрын
can you do me a code for this subject
@stsivadev Жыл бұрын
Sir i raised with error flag.. Subchart output data pulse can only map to main chart data if its size, type and complexity are fully specified. Please direct me how to overcome the above error