static routing with Connecting 4 routers with explanation | Cisco Packet Tracer Tutorial 3

Cisco Packet Tracer Tutorial 3 || Static routing
Document/ lab report: bit.ly/30OMVNx
Hello! In this video I've explained how to create a network with 4 router and end devices with different ip address in Cisco Packet Tracer. You will learn how to configure the router & laptops easily after watching the video. You'll be able to set their IP address and can send data from one PC to another and also ping them.
Visit my blog: bestece-projec...
Twitter : Twitter: / ece_projects
#StaticRouting #CiscoPacketTracer

[@AbhishekDubey2131]

mam press ctrl while picking cable ..then you no need to select again again cable from tray ..over all informative video ..thanks

[@ece_projects]

Thank you. 😊 I couldn't find any way to do it in this new version. I'll try this next time.

[@CitizenPerkins]

That works for placing multiple PCs, Switches, and Routers, too. CRTL + PC icon then left-click, left-click, etc.

[@aarushchaubey516]

cutie

[@iktrick3858]

​@@ece_projectswhere is delete option when we send one router to 2nd rounder mail then delete them I have no any delete option in laptop

[@AT-sj1wl]

Thank you so Much for this. You explained it so well that I'm shocked. My professor doesn't even compare. Please keep up and amazing work!

[@joyjit_roy]

*Ohh thank you God bless you. I was ramming my head last 7 days after watching Network Kings videos. Yours is crystal clear. Thank you so much.*

[@nurfebiyonamaksum4676]

Hi i'm from indonesia. I've watched a lot of videos but yours is most understandable. Thanks in advance❤

[@joyjit_roy]

*Your explanation is crystal clear. I would request you to kindly upload full CCNA course labs like this.. if possible CCNP too...*

[@ShottaBearYT]

This playlist helped me more than any of these boot camps ngl

[@khalivalabi2089]

Masterclass! I like how you don't waste time overexplaining. It's so clear and concise. My question is Why do you have to use a serial connection to connect router to router? I have seen other videos where they use straighthrough. Thanks

[@SkyMonkey42]

In the real world, A serial cable requires less configuration vs an Ethernet cable (straight thru) as Ethernet cables are harder to troubleshoot and set up. A Serial cable is also immune to Crosstalk interference, it’s more efficient, and cheaper in cost. Also keep this in mind, Router to Router Most of them can use a straight through Ethernet or a crossover Ethernet cable since they have MDI-X which automatically detects and converts the cable from straight thru to crossover and vise versa. Much older models of Routers you had to be careful and use the correct cable or else it wouldn’t work. From a lab perspective you could do it either way, but for simplicity purposes it’s better to use the serial connector.

[@7fil554]

Thank you,finally i understand what this whole packet tracer works

[@FaberLSH]

Thank u so much. Your lesson really helped me to finish my task in class. I do appreciate your efforts. Thanks again!

[@megmucklebones7538]

Thank you very much, very help and easily explained. Much respect from the UK!

[@jhinsni54]

you are a legend wathicng you from EGYPT✊ Keep it up man

[@Balibali418]

Thank you so much, was having some issues with Static Routing but I perfectly get it now! :D

[@raikular4771]

thank you very much for this video. I always failed to do any to any communication. but after watching this video i learnt to do that.

[@MukterHosen-i4t]

first starting was awasome.But when the static connection part started, it was very complicated. I think this part can be handle more easily.

[@qaiserbozdar1542]

Thank you miss, there will be 1000k subscribers one day.

[@stephenprasetyachrismawan1227]

Thankyou so much, Respect from Indonesia

[@MRROBOT-fc5ny]

Thank you so much this playlist is very helpful

[@batinraza7138]

Thank you so much.!! You just saved me from failing 🤩🤩

[@danishtanveer161]

Mam Thank You so much. This just helped me a lot in understanding static routing...

[@shikhararora943]

Thankuou for helping me clear my doubts about physical settings in router.

[@patelgaurav4808]

This video really help me. So thanks for sharing this with us

[@aruppaul7408]

Nice explanation. It helped me to develop a complex network.

[@er.rajbirpotter3575]

Really informative! Understood the concept very well. Very informative tutorial

[@fatimatalks9571]

Saved my day .. thank u maam so so so much .. a great explanation

[@whiskyyt5220]

Lot of love you made it piece of cake for me well done well explained

[@kauebmr]

Thanks, you helped me with my school work!

[@berkantataman3291]

Thank you man my teacher cant tell this in 3 hours

[@nevergonnagiveuupXDDD]

thank you for saving my GPA

[@Netwaytech]

thank dear . i learn many thing from this video . but in the last i have little confusion i am trying again and again

[@mehrdadghassabi2504]

making the life more easy.... thank you so much

[@detrinizeus3554]

I am so happy that you explained it so well. I just started using the packet tracer for an assignment and our professor did not explain how to connect networks so I am grateful

[@casalmollabrasileturquia8690]

Obrigada esse video me ajudou muito. Consegui entender melhor o conceito aqui nesse video do que em um semestre de aula.

[@SNEHDENCARDOSO]

Hi dear thankyou for teaching me,do you work as network administrator is it easy to find job as network administrator without computer science degree and without Cisco,MCSC,CCNA,CCIE certificates i only have master in network administration and diploma in network administration certificate will i be able to get job

[@samiksood789]

what to do in case of Variable length subnetting along with static routing? what will be the subnet mask?

[@rumanzahid6671]

Really good and very interested mam

[@grandebaee]

THANKS A LOT!! 😭😭

[@dunraksmey6083]

U save my life xD, thanks so much.

[@jatina5994]

Thank you for another video, I hope you remember me hehehe

[@bhagyakavijan9014]

you are a game changer...!!

[@karl3168]

you saved my life!

[@samarthgupta8512]

mam, how to make working connection of four routers and each having two switches and every switches having three three PC's. Do i need to add any other configuration apart from assigning IP addresses to each and then doing routing..(static routing) ? please guide me..

[@abunaseribrahimimani]

Great tutorial, thanks for that

[@kanekiken6431]

I didn't select the route backwards but still it is pinging and is successful ... So is it ok? Please i need answer by midnight as it is my deadline for the assignment

[@bigman2958]

Thank u very much it helped me 😊 alot

[@zuliano05]

How can i know when a directly attached static route to an interface is using ARP?

[@Gaming-withnolimits]

Thanks for helping ❤

[@Gaming-withnolimits]

This is my university oel lab for final term exam ❤😂

[@yamarajaspring9518]

Thank you so much 🤗 🤩😍

[@100waysofexcersies3]

1 Router is connected to how many networks. ?

[@consfer]

very helpful!

[@anjleenatufail]

it works perfectly even if i didnt write the ip of connected routes (like 12.0.0.0 and 13.0.0.0 and all).. then what is the need to mention it ??????

[@higuy55100]

Why do you use 11.x.x.x and 12.x.x.x and 13.x.x.x for the serial connections, not 192.168.x.x?

[@ece_projects]

You can use it if you want. I just took them to make it easier to explain

[@aljabri272]

Thank you sooo much ..🌹♥️

[@iktrick3858]

How to delete my old mail I have no any option to delete my sending old mail delete option

[@wazeerishtiaq8972]

Good Work mam

[@hoka89]

Thanks info guys

[@KashmiriSquadX]

Mam can you help me to solve an Assignment...that is about static route configuration.....Please Mam🙏

[@waliullah5894]

there are so many question that should be ask

[@Mohamedbasith2001]

Thank You.

[@user1345-q]

when i go to router 1 configuring static routes this error pops up "invalid subnet address entered"

[@sachinimadubhani6759]

Thank you soo much mam.

[@BilldeDios]

Thank you

[@sucessstory1465]

thanks for your help princess

[@christleeada7875]

Thank you so much!

OMG THX IT WORKS

[@-21-ih1eq]

Thanks

[@mateussantana2075]

Brasil mandou um abraço

[@muhannadayman6260]

thanks so much:)

[@forkanfahimfhf6563]

tnq

[@loelludovice7157]

14:35

[@ShahAlam-xx3qd]

Good

[@sakinafatima]

clear nai hy settings kesay ki hy ap ny

[@hungarianwolrdoftanksblitz9957]

2:19 Why need 4 routers, coz when need 1 switch

[@naira_sisters6701]

last wala nai ho rha ?😢

[@adeelakofficial]

love you jana

[@niceleader5272]

Siema chcesz wpaść na lekcje do nas bo nasza nauczycielka nieogarnia?

[@pero9534]

wbijam 14-200 mordo

[@cashmere2087]

why doesn't it work :(

[@忆俊]

madam this is what topology？😊

[@mostafa5195]

Computer networks

[@no-maan1020]

🙏

[@sonictrain1]

You are better than my professor! Thank you :)

[@mattbil]

thank you

[@vishalchauhan2611]

When you waste all day in others videos for router configuration and didn't find any useful material. And at the end of day you got this video. Really very glad to see this information provided by you. I am really very thankful to you for this.

[@joyjit_roy]

seeeriously man.... i was watching network kings videos.... but Atul didn't clear it properly... also there were gaps in classes. then i came here....

[@joyjit_roy]

whoever she is god bless her... but i would request her to upload full CCNA course labs like this.. if possible CCNP too...

[@scidja8567]

Newbie here! I don't understand why you are using serial ports to connect routers? Aren't you supposed to use trunking to connect router to router?

[@ceilotech2143]

Very explained video. Just that i have to set my Aux 0, Console 0, VTY 04 and encryption before doing this. Thank You! Love from Nigeria 🇳🇬

[@elionaidgranados1005]

id like to say thank you because you took the time to make this available to people starting from 0 like me Thanks!!

[@ambarishmishra8463]

mam you can apply and run some commands as well in the configuration process while you are copying the ip address for completing the configuration process for Router like : "en" ( make enable the process of router configuration process) "Config t" ( make allow the process of configuration terminal process of router configuration process) then you can give ip address whatever you want to give and then "no shut" ( make sure terminal process of ip is not shutting down) …. simply these commands make all the process complete …. by the way mam Video is Superb …

[@laughingmedication8193]

his a kid

[@aarushchaubey516]

@@laughingmedication8193 so am I

[@better-health-now]

Why do you change the serial connections IP to a class A address?

[@thewantedtechies256]

Configure the other PCs and configure the necessary static routes (such as IP route 0.0.0.0 0.0.0.0 exit interface) on three routers to make a successful connection between routers. “Show ip route” check and screen shot each router’s routing table?Is this question suits this video?

[@unknownman6833]

YOU'RE THE TOPPEST GENIOUS OF THE WORLD. THANK YOU VERY MUCH! YOU SAVED MY LIFE!

[@sachchi_danand]

Kuch bhi

[@aarushchaubey516]

@@sachchi_danand real

[@pastaloverishu]

THANKYOU SO MUCH I WAS CRYING BECAUSE MY TEACHER NEVER TAUGHT ANYTHING I'M SO THANKFUL TO YOU

[@skeehc]

This is IPV4 configuration correct?

[@ece_projects]

Yes

[@abasiekemeekanem4924]

i was following from tutorial and the same thing you are doing but when iw as about sending a message to pc 1 it say pc1 has no functional port, what should i do

[@balajipraveen7287]

Am confused about adding interface route between routers.. Can u explain that plz

[@vladiusvostokus]

As i know, you need only to add next hop to network you need, but you don't need to add network between routers.

[@mehedihasanbabu2074]

Watching from CSE-18 , PSTU.

[@farazhasan2942]

hello mam we have to give same network id to serial port of connected network. but plz clear do we give any same network id to serial port or internet provider will give us this id, lot of confusion because it is not possible to joint cable on router place at different place to give same ip. suppose in pune my internet provider gave me a class ip and in delhi my other internet provider gave me b class id so how will we set same id on serial port I hope you will understand. i don't know which cable we joint jo serial port, the cable which comes from terrace to aur home or some other . plz clarify

[@ece_projects]

It'll be given by the internet provider. As we're just simulating it in a software , that's why we are writing the ip addresses ourselves. And all the devices that are in the range of that router & connected to it, will have the same network id. Such as a company or institutions or in a university , if we connect the device to the wifi you'll see that there is a common network id for every device connected in that network.

[@losinekenneh2334]

like the content but too fast and i didnt manage to configure the various devices

[@gustavojosegarciabalza7484]

THANK YOU THANK YOU THANK YOU SO MUCH THIS IS WHAT I NEED !!!! GREETINGS

[@emmanuelanunobi3744]

thank you it helped me and it worked perfectly much appreciated

[@infopc-arieh6372]

Excellent ... wel done ...