Stationeers Tutorial: Base Pressurization

This Stationeers tutorial shows you how to build a more advanced system to pressurize and maintain pressure in your base. It also shows you how to properly mix your nitrogen and oxygen.

[@brianemmettmartin]

You explain all of this in under 9 min? Why do other videos take 45 min and I'm still confused after? You sir are a great teacher. Thank you.

[@XD9rottie]

I think next logical step is “dealing with Breathable atmospheres”. Once you start to breath in your newly pressurized enclosure CO2 will build and you will need to deal with temperature as well. Oh and if you do anything like spray paint you’ll have to deal with the dreaded “X” gas. Also agree that hydroponics is a topic not many have tackled much yet

[@Patrick1985McMahon]

The why you run wires is disturbing.

[@RottenJeeves]

with recent updates just use a pressure regulator.

[@HLLTAF]

Oh crumbs this is an old tutorial :/

[@neilthesupplier]

how do you get portable tank nitrogen? you need to start from the beginning, like what you need to make the parts?

[@Doomquill]

If you need to know how to build the things used in the video then you need to watch other tutorials or just play the game. Most of the parts will be made in the Hydraulic Pipe Bender. You start with a tank of nitrogen for jetpack propulsion. If you need more nitrogen, oxite becomes 90% oxygen 10% nitrogen, and you can also get some from smelting various ores in a furnace and collecting the gasses.

[@holyman2875]

Great stuff mate. Only new to Stationeers but my station is coming along nicely thanks to your tuition.

[@GrunfWorks]

Great tutorial vids man, you got a subscriber :-)

[@paulamorbidelli7983]

Hi Bushwackah! can you do a tutorial explaning the hydroponics setup? beacause the medical pills requires wheat (x50) and we dont know how to cultivate them

[@Bushwackah]

My tutorials are working towards that! Stay tuned!

[@GaryParkin]

Thank you 2 years later. You are my go to teacher in all of this. I'm making my first "home" with a pressurized area. Never done that before so it'll be fun. I think I'm going to premix my air tanks (Thanks for the other tutorial), and connect them outside the room. I'll also need to first suck out all the air (I'm on Mars) , so that will go into my filtration system next door. (Thanks for the other tutorial). I've seen where someone connected 5 passive vents to an active vent and it helped the air move quicker through the airlock, so I might try that too. Next up, I'll have to deal with heat and cold. (Next one of your tutorials lol)

[@bananakings5165]

why does my base get so much pollutants in so short time? im preathing for 5 mins and i DIE cuz of toxic. what do i do?

[@bananakings5165]

i got a bit bigger base on mars but there is NO WAY to make it have oxygen. more i put, more it leaks out even if im inside. what to do?

[@oth4l4]

Great video , don't know if they still revelant but help me a lot to understand the game ! Thank you !

[@bananakings5165]

ummm i made all that but it aint go higher than 4, what do i do, i set up a base on mars.

[@Asasino21]

Thank you for the nice quick tutorials

[@brodyenli]

Am I able to just use 100% O2? I have a lot from my greenhouse, what are the benefits of using N2

[@RottenJeeves]

O2 is highly flammable. You want about 20% O2.

[@slayerfan61]

question, when capturing gases, do you open the empty tank prior to filling or is that necessary?

[@Bushwackah]

It is not necessary to open the tanks prior to filling

[@pzugames8245]

nice video....

[@breafonted]

Cool vid

[@Bushwackah]

Thanks for watching!

[@stacypenn4924]

thx that helps

[@jackobite60]

do I need nitrogen? What will happen if I substitute nitro for co2? 80% co2 sounds dangerous tho

[@karlii353]

jackobite60 yeah.... no.. you might blow up.. dont try it haha ;P

[@jaxxrr]

co2 does not ignite.. quite the opposite..

[@darkssim8011]

to normal humans over 10% of co2 is more than enough to kill them. but i dont know about this game