Stealth Bomber E-Bike Stock Controller Upgrade to Far-Driver ND96530

Channel Support - www.paypal.com/paypalme/evcus...
3D Printer - Creality CR10 Max Link - www.shareasale.com/m-pr.cfm?m...
Patreon - / evcustoms
PLEASE SUPPORT CHANNEL 👇👇👇👇
DIAS Customs Channel - / @diascustoms7182
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - Artlist album

[@salviaaable]

it's not the controllers fault over 90% of the the case the battery cant deliver the amps.... writing this before i have watched the video to the end^^

[@EVCustoms]

Yes I knew that the battery wouldn't hold up to pulling the controller, because the cells inside they are not High Drain, they are only for capacity. I changed the controller because the customer wanted a sine wave controller to begin with, and then as soon as he finds money he will also change the battery to high power..

[@salviaaable]

@@EVCustoms i got the same bike, with 72v 30 ah battery, 3 kw motor, and sabvoton 45A controller and it's good for me, good top speed and battery are holding up even on low charge...

[@antonypartali]

@@salviaaable My friend you understand for 45a controller don't need something special.. But for a 400a e-bike you can't buy all the parts at once because of the money (except if you have them) ... So our friend start with the controller (it is manageable), then he will upgrade and the other parts (battery, motor, wiring, brakes...) The basic here is that the upgrade make it from professional guys EV-CUSTOMS, knows very good what to do and our friend bike works without problems..😉 That's the fun of a tuning process... When you starts never stops...😘

[@joshchristman9087]

I love the 3d printed casing you made for it. Could you make me one for a ND72450? I just got it delivered today. Super excited.

[@mikeg6633]

Definitely love, LOVE the 3D printer. I can see that you didn't really feel comfortable drilling more holes in your frame. That's why I have a big, dorky mount on my fat bike for the controller and wiring. I used 1/2" HDPE and it's kinda heavy. I'll look into those printers. It would make my builds so much cleaner and stronger.

[@TheEliteShatter]

Is this 400x400 build plate? I have the Anycubic Chiron just curious the potential difference in size

[@tacticooldennis]

If I had that frame, I would get the Garmata seat and put the controller in the rear, that front mount will impact on landing.

[@eamonnthatcher]

Hi ,i live in uk interesting in buy the box you printed for controller,or can you send information so I can get it print in uk please.

[@ravikannan4027]

👍👍👍👍👍

[@akechetasavage7658]

Could I request an in-depth look at how to put the cups and bearings in to make up the headset its my first time building and I feel its the only thing keeping me from finishing

[@antonypartali]

Είσαι σε άλλο επίπεδο ΚΑΛΛΙΤΈΧΝΗ μου!!😁😘 Πες τον φίλο (ιδιοκτήτη) καλωσήρθατε στο club (upgrade)😁😁

[@EVCustoms]

Ela re Antoni.. xaxa tou to metefera...

[@banneduser978]

Wish my bike was as smooth as this he's got instant throttle the factory replaced the controller and display it worked for a min than something cut out the throttle completely frustrated

[@cheythompson740]

That model looks like the knock off stealth bomber

[@factory4642]

So what is it a stealth bomber clone?

[@arqhies_youtube]

Definitely it’s got weird side panels

[@jonezdatonetech2758]

Dah ??

[@Elpatronbikes448]

top vido ...........

[@EVCustoms]

thank you👍

[@MrINKOMPATIBEL]

....and a new battery customer. 😁

[@EVCustoms]

😁😁

[@Jbmc65]

Where do you get the signal lights for the front of the bike?

[@Smokey00]

Get garmada seat

[@digitalbilly]

I want to watch you do a Nucular P24F controller learning board guide and setup. ❤

[@EVCustoms]

Unfortunately i don't have any Nucular controller

[@digitalbilly]

@@EVCustoms in case you get one please make a video!!!!

[@player1unknown9]

how? I am asking how about the seat I bought one myself and am building mine from scratch. but my seat doesnt fit on that frame, my motor 150mm doesnt fit for my 150mm motor the axle is to big

[@Motorizedstuff]

Was justgonna say thebatterywill not copewith it at all lol

[@noahhinson5693]

hey so i want to build an enduro e bike but one guy says i need a fuse and extra stuff and another says that stuff is built in and i’m not sure who to go with.

[@TheTeenageWoodworker]

Get the fuse U can't be to sure if U don't have fuse the you are going to get blown up

[@louietramposch4559]

🤟👽🚲🎬

[@MaestrulLacatusfara]

how do I recover the current used by the electric bike ,,

[@Vmaxfodder]

ND 96530 is no slouch!

[@Thefreakyfreek]

I'm currently building a 2000w hybrid cargo mopet and your videos are great help because most of this stuf is unlabeled I'm very well educated in electrical stuf but I stil need to know what wire dous what and how. I'm probably going to get the controller you have here it looks a lot more professional than the 3000watt unit i have now simular to the one you removed in this video I love that yellow

[@Vmaxfodder]

How's it working. What did you get?

[@vlp1]

I've just bought ND72680 controller but damn, the Android app is CHINESE:((((((( HOW CAN WE GET ENGLISH VERSION?

[@graydenhasty8628]

Is this the actual stealth bomber?

[@thomassharwin5310]

Nope it would smoke a real stealth bomber

[@jonezdatonetech2758]

Nice work man Can I please buy one of those 3D printed cover that you made ☝🏾? Hit me up please…

[@EVCustoms]

Thank you mate.. have you any email?

[@jonezdatonetech2758]

@@EVCustoms I posted my email yesterday but I don’t see it anymore, did you receive it ?

[@mdstanley7052]

​@EVCustoms, please email me the invoice for that awesome 3D printed cover.

[@alternativeenergychannel2289]

Hello mate i just found your chanel !! Nice videos? Do you live in Cyprus? I have an electric motorcycle that i build my self.. I am using Two 60 volts lipo batteries 40 amps bms connect in parallel for a total of 60 vollts 80 amps battery pack( voltage is 70 volts when is fully charged). I am using a cheap universal ebike controller .. it is working perfect for 6 years now .. the only problem is top speed only 50 kmh .. Can you help me to upgrade my controller? Do you have any extra that i can buy from you? 😅

[@erhaneroglu3464]

Hey bro can you help me ım useıng ebıke lıke your ebıke and ı wıll buy e new controller but ı have no ıdea so can you tell me your name of controller or wıch amp. I must buy ? Batteries 60 volt lıpo(max70volt) the motor 2000watts 3gear

[@vanbos4]

Staroe vidio....

[@EVCustoms]

😁😁

[@laptech3767]

What is the battery dimensions

[@MrDeceptacon88]

Oh did you get 16V voltage sag on take off??

[@EVCustoms]

Hi... what you mean?

[@MrDeceptacon88]

@EVCustoms near the end of your video you said 16V down

[@EVCustoms]

Ah.. yes the batteries are not high drain.. they need replacement..

[@MrDeceptacon88]

@@EVCustoms so it was 16v sag when you accelerated?

[@EVCustoms]

@@MrDeceptacon88 Yes..

[@XXHellBig125XX]

can you share your print for the holder for the controller the .slt plz

[@EVCustoms]

Hi.. send me your email

[@XXHellBig125XX]

@@EVCustoms never receive anything

[@EVCustoms]

i didn't see any email... send it ti on messenger on Facebook

[@XXHellBig125XX]

done@@EVCustoms

[@Vmaxfodder]

450 phase amps

[@joeblow6756]

If you get a rear flat, you'll need to do this entire video in reverse in order to get the wheel off far enough to change the tire. -Just sayin'

[@EVCustoms]

Yes this change need time... 😅😄

[@lightdenied]

maybe a custom extension cord??

[@tacticooldennis]

Its not that hard to remove. But it defiantly sucks compared to a normal dirt bike. I've done it at least 3 times. I just lift it up under a ladder, drop the tire down on a blanket and swap the tire. You have to replace the zip ties on the side of the swingarm, but that's the easiest part. Newer ebikes have a disconnect located on the swingarm.

[@joeblow6756]

​@@tacticooldennis that would be easier for sure, but for one, if you ur building one of these from scratch, you'd need to have enough know-how to keep that in mind at the start of the build because the way ur describing won't work on some of these bikes that come pre-assembled. Like the ones from ebay or alibaba or whatever. My bike for example that wouldn't be possible. With where the controller is mounted and how snug all the wires are, there isn't even enough leeway for me to get that back wheel off without doing the whole video in reverse. The leads just aren't long enough. And if the swingarm is jacked up on a stand or ladder or whatever, the legnth of the wire is too short that it prevents the wheel from even touching the ground. It's just not long enough if you can believe that. (but wouldn't expect any different if you consider where it was made/assembled lol) Also, if you tug on those hub leads too hard you can damage it in a way that involves having to rebuild the hub to a certain degree. In the whole process, you risk damaging hall sensors if you're not careful or don't know what you're doing. And I've had two flats on this damn thing so I've done the video both forward and in reverse twice already. I told myself that if (when) it happens again, then F this thing and it's getting replaced with a Sur Ron or Talaria or something along those lines. I didn't even mention in the last comment that every time that hub comes off, it needs to be recalibrated or the speed/mileage won't be accurate. You have to do that whole process with putting it in calibration mode and walking the bike 10 feet and that whole nonsense. What a hassle for a flat tire. I wouldn't say it's difficult, but it's an enormous pain in the ass. And completely unnecessary. There's so many better ways. Lately, I'm seeing people using xlr audio jacks as the battery disconnect on some lower voltage bikes. Smart. The thing is that most ebike riders (out here in southern California anyway), aren't very mechanically inclined. They buy these bikes without any knowledge of basic electric/electronic circuitry and could barely change a tire on a non-electric bike. So for the everyday joe schmoe, changing a tire on one of these rear hub motor bomber clones is gonna be a monumental challenge. And most shops out here won't go anywhere near these. So they all wind up getting parted out on FB marketplace.

[@tacticooldennis]

@@joeblow6756 Yeah I came from both a dirtbike and computer background so working on my Alibaba stealth clone is pretty easy. I just replaced a tube this week, and sure enough a new tire arrived today, so now I'm debating taking the whole thing off again, cutting zip ties fighting the rubber so I can go with a Shinko vs a bald knobby I'm running. I see on the real stealth b52's have multiple connections that separate at the crank. kzbin.info/www/bejne/eIa9dHtqf7x-n9U I run a Kenda rear with a ultra Michelin Ultra HD tube cause I hate flats. I still managed to pinch it with a spoon on my last tire change.

[@dextermendigorin7884]

Thats not votol its fardriver controller

[@EVCustoms]

Oh my good sorry!! thank you mate

[@MichaelJHathaway]

[@THEPAINOFITALL]

Yasou, long time subscriber, you have helped me in the past. I have a Clone Sabvoton ML7280 contoller, however no instruction how to connect, there is 1 single grey, I cannot work out what it’s for 🥹

[@EVCustoms]

Hello man... gray mist be with metalic connector, phase meter (input)

[@THEPAINOFITALL]

@@EVCustoms Thanks for reply…is that a learning wire? 😳 Where to connect?