Mustang GT500 Style Spoiler w/ Tinted Wicker Bill | Review & Install

[@bardstables8909]

I must've gotten mine just before this came out. Mine looks like this but I didn't get the upgraded hardware and it didn't come with those locating studs. Overall a great looking spoiler though.

[@luisvalverde8212]

If you’re going to do this don’t use the double sided tape they provide no matter what you do it will not stick go buy 3m from any auto parts store and custom fit it to the spoiler

[@JesseAndMike]

Nice install! Spoiler is awesome!

[@RipleyandSwoo]

Do yourself a favor and buy a Deep Magnetic 10mm Socket for this task. Saved me some anxiety

[@BladezX911]

Ordered mine and it fit perfectly unfortunately the gurney flap cracked after a drive on Texas highways, not sure if it was too much air pressure but I snugged them down just enough to avoid over tightening but it still cracked completely on one side. I purchased the premium kit.

[@steedaautosports]

Hi - We are sorry to hear about this. Shoot us an email at sales @ steeda . com with your order number and photos so we can get another gurney flap out your way. -Chris

[@BladezX911]

I did and spoke with one of your representatives who is currently looking into the photos I sent. Thanks for the speedy reply. Love the products made by steeda I have several of your parts on my car.

[@Preplaycj]

Premium hardware is only good for the guide screws the other bolts come out easily, especially if you need to unscrew the nut.

[@KaiatheSiberianHusky]

Aren't you supposed to torque the nuts on the spolier and the bolts on the wicker?

[@cgc]

Why not use a 3M stripe off wheel to remove the adhesive. I can't tell you how many times I've used one and it's never cause any damage and saves a TON of time (no two hour adhesive removals)

[@steedaautosports]

A wheel definitely would have made things a lot faster, but we chose to take the route with more commonly available tools.

[@leviscurlock3986]

Any pictures of this wing on a 3valve mustang?

[@jweezy216]

How much does this installation normally cost

[@Lethal_Venom]

Is the install process any different with the standard spoiler that comes on the 2017 GT350? I've wanted this wing and that hardware kit would be useful

[@krankysledzz]

Is the GT500 Spoiler available in Canada? I don’t see it listed on your Canadian site. And you won’t ship to Canada by looks of it.

[@Rob...]

Fits perfect.. Love it

[@sabir3842]

does the wickerbill come pre installed? because i would like to get the wing without the wickerbill but I do want to holes to show is it pre drilled in?

[@austingordon7061]

Hey Chris and guys, I'm between this and the Ford model. Can you confirm that this is the same size as the Ford one? Thanks -Austin

[@steedaautosports]

Hi there - Yes, it's the same size as the Ford Performance version! Not a copy, but definitely GT500 Style. Hope this helps! -Chris

[@oldskoolbmw]

Can we put it on a convertible?

[@safaee1140]

Will this fit 2024 mustang ecoboost ?

[@steedaautosports]

Yes it will. We actually have a video on our channel fitting it to a 2024 Mustang and a specific hardware kit for the 2024s here -> www.steeda.com/mustang-10-1015-112-gt500-style-spoiler-w-tinted-wicker-bill-gloss-black

[@freedom6919741]

Will this fit a convertible?

[@tornado_dude2039]

do you have to drill holes in the trunk?

[@steedaautosports]

If your car came with a factory spoiler that isn't a California Special, then no drilling required!

[@tornado_dude2039]

@@steedaautosports I have a 2016 gt350. it has the small lip “spoiler” on the back. (non track pack)

[@christopherwhite3752]

Will this fit my 17 GT350 or will I have to go the more expensive route and get the Ford Performance one?

[@steedaautosports]

Yes this spoiler will fit the GT350

[@here_for_the]

👍

[@xignith]

Are the bolts that come with the gurney flap black or silver?

[@steedaautosports]

The bolts included with the spoiler are black. The stainless steel bolts are part of our premium hardware kit.

[@Stangry50]

will this now fit the 2024 mustangs?

[@steedaautosports]

We're working on a kit that will make this work on the '24s. Stay tuned!

[@mattjones1378]

Does this decrease gas mileage?

[@steedaautosports]

We haven't heard any feedback about gas mileage being affected by this spoiler. We have heard from people with the Ford Performance Spoiler that a 1-2 mpg drop is possible when running the wicker bill on the street.

[@matt0198922]

Does this fit the S550 PP1 wing holes?

[@steedaautosports]

Yes it does! -Chris

[@anthonyvicencio542]

Will this fit a 2019 mustang gt cs??

[@steedaautosports]

The California Special cars have the center bolts in a different orientation than the standard GTs so drilling new center holes and covering the old ones would be required.

[@svtcobra666]

I wish someone sold the Wicker Bill ONLY for this spoiler....

[@MannyG5]

They doo

[@MBR0108]

So your spoiler is a PITA to install, unlike Ford Performance and your solution is to make it like the ford performance but charge more for the upgrade (proper) parts…😂😂😂