Toolroom lathe: Weiler Primus

[@ThisOldTony]

congrats! great looking lathe, almost as pretty as you!

[@blazingmatty123]

Eyyyy tony

[@StefanGotteswinter]

*Awwww* *Blush* Thank you.

[@danoneill8751]

Its not as good as his smooth talkin' monologuing. The man can one-take a 20min technical lecture like a ruddy pro. He's gonna be a talk show host one day, you'll see.

[@EK1981]

@@danoneill8751And that as a German😅👏🏻

[@Bunk599]

Two All-star machinists in the same post!! It is a beautiful lathe and you are just the right guy to fully appreciate it.

[@perw12345]

"I don't see myself as a teacher." Well too bad, because I've learned a ton from your videos.

[@raindeergames6104]

Im not here for the lathe. Im here for everthing that You teach us. Im soooo happy for anyone that can improve their equipment.

[@michaelidarecis]

Am here for the lathe today haha... Have been looking for a Weiler at the auctions in the US. Stefan does a great job on his videos!

[@JamesChurchill3]

I'm here for Stefan's magnificent ponytail.

[@pedrobatista4439]

Congrats on the new machine. Can't wait to see it shine. I don't get why people throw the "This channel is getting unrelatable" non sense card at you. This is a working shop where you get your living out of, so if you can improve the quality of your work by getting better machines, why not? This is not a demo shop filled with a bunch of sponsored machines just to gather dust that requires mentioning every single brand at 100 times per video. This shop is used to make a living.

[@rickmyers3716]

Right, and what’s more!… I wonder what any such viewer would be afraid to learn, watching professional work, done by a professional, on professional equipment, that they couldn’t still apply to any other setup or for any other caliber production 😂… the more this shop grows the further my knowledge does I can’t imagine that’d ever be less true for anyone else 🤷‍♂️ and it’s the same content provider, providing to an entire world, a window’s view into his production, as it evolves and grows… but it’s **HIS** PRODUCTION! 😂

[@QinX81]

Ouch shots fired at a certain american youtuber?

[@DudleyToolwright]

Don't worry about relatability, your technique, process approach, and charming personality, is what we are here for.

[@adamthemachinist]

Congrats on the new lathe buddy!

[@StefanGotteswinter]

Thank you very much!

[@Paul-FrancisB]

Stefan, no need to apologise for getting a more precise machine to do your own work. Your demonstrations of what can be achieved in a small mostly manual machine shop is definitely relatable to many hobby/home workshops so more of the same is welcome, it always brightens my day when you release a new video.

[@ROBRENZ]

That is a beauty Stefan, I can't wait to see your enhancements! ATB, Robin

[@StefanGotteswinter]

Thank you, Robin, hope you are doing well :-)

[@carlkulyk366]

Don’t apologize for the evolution of the quality of your machines in your shop. It is natural, especially when it is a professional shop. Thank you for all your video’s, I enjoy them all.

[@spehropefhany]

Only 20x what my lathe cost new, and a beautiful tool. I do look forward to seeing what you can show us of you using it. Frankly this is a lot more relatable than some other channels because you actually made a decision to invest in it and it's not some sponsorship gimmick to sell tools. Happy new year of the dragon too!

[@CameronMcCreary]

A used machine tool rebuilt by German technicians is going to be a finer machine than a new one made in China. I really enjoy watching Stefan make parts and teach about techniques. I am a 68 year old retired CNC and non CNC machinist and I still learn alot from Stefan.

[@StefanGotteswinter]

Thank you so much for the kind words!

[@edpopelas2844]

I’m as hobby as a hobby machinist comes and I find your content completely relatable. I especially like the new challenges you face and how you tackle them. I wouldn’t change a thing. Congrats on the new lathe!

[@CameronMcCreary]

That's nice Stephan that you were able to machine metal with you own tooling and metals! It definitely makes your decision to purchase much easier. I wish that could be accomplished here in the United States of America.

[@ChevySampath]

You make your work totally relatable. Your videos got me into machining 10yrs ago with zero experience. Even though you use different equipment, I've always been able to apply your techniques and processes to my own work/shop. Thanks for sharing all your experience and knowledge!

[@joell439]

Stefan, you an unselfish mentor and a professional who is very curious and willing to share your processes and discoveries. As I hobby machinist, these are exactly reasons why I watch every second of your videos. You inspire and elevate my capabilities and confidence with every episode. Thank you. 👍👍😎👍👍

[@BaconbuttywithCheese]

If anyone has tool envy, it's their problem not yours. Keep doing what you do, those who appreciate your content are along for the journey as well as a little education.

[@sighpsycho]

For what its worth on the 'less relatable to the hobby machinist' question at the end: your channel, along with cylo's garage and robrenz, are where I go to learn advanced techniques; there's a thousand channels of 'guy in a shed makes a thing'.

[@russelldold4827]

Congratulations on your upgrade. I doubt you will lose any of your audience - we learn from your planning, work processes and disciplines, which transfer across all machines. Thanks for sharing.

[@galeon1810]

I believe your content stands out for its unique focus on maintaining high-quality work. Your channel is on par with Robin Ransetti's and Tom Lipton's. Its primary value lies in the meticulous attention to detail and the overall quality of craftsmanship. I believe that someday I will achieve a similar level, and channels like yours are a great source of inspiration. Please, do not change anything!

[@TheUncleRuckus]

You may not consider yourself to be a teacher but you are. I've learned tons of valuable helpful tips and tricks that have helped my a lot over the past 8+ years I've been watching. Great video as always! 👍👍

[@SamEEE12]

I have always appreciated your practical snippets, even though you don't consider yourself a teacher I would say you have contributed more than you could ever guess to the hobbyist and professional toolmakers community. Also: 100K+ subs -- congrats! :-)

[@StefanGotteswinter]

Thank you!

[@charlieromeo7663]

Nice machine Stefan. I was fortunate enough to find a 1969 Hardinge HLV-H about 15 miles from my home. I’ve since rebuilt it and it is my favorite machine to use in my home shop. We have a small group of home machinists at work (Blue Origin at Kennedy Space Center in Florida), and your videos are discussed quite regularly. While you may not consider yourself a teacher, you educate us nonetheless and all of us enjoy what you do very much. Enjoy the new to you lathe, it looks well-suited for your needs. Cheers from Florida’s Space Coast.

[@philiprogers5772]

I enjoy watching anyone who is good at their trade.

[@johncall4525]

You're comments at the end are spot on. The machines are cool and fun to see and learn about, but it is the techniques and approach that are most interesting. That combined with your personality and delivery are what keep me watching your videos. Keep up the great work, I'm glad that your new business venture appears to be going quite well for you.

[@BernardSandler]

May you use your new toy in good health and may it bring fortune and productivity to your business. Congratulations. It looks like something that belongs in a surgical theater. I do adore the term renzetification. Thank you, as always for taking the time to explain your processes and decision-making. There are always going to be insights to be gleaned from your channel, regardless of the machinery you choose.

[@ThePottingShedWorkshop]

Don't worry about how relatable your videos are. They are really interesting as they are. There are many channels showing less precise work ( or I could just look at what I get up to in my workshop!) but it's good to see a level of accuracy and precision that I can aspire to even if I'm unable to achieve it.

[@karlsorensen3214]

Thanks for the video Stefan! Your channel is completely relatable. Physics is physics and theory doesn't change with machine costs. In addition, your journey from hobby to more than hobby to professional has it's own educational and entertainment value. Say "applicable", not "applyable" which might not be a word.

[@TheTacktishion]

Thanks for introducing us to your new lathe.... I have a small, at home machine shop with an old Lathe (50s) and a Bridgeport (80s).... It doesn't bother me at all, that you get "new stuff", glad you get it, and tell us about it. As you said.... A Lathe is a Lathe is a Lathe.... Always look forward to your content, and "Mystery Parts" Keepum coming!!!.

[@stanstocker8858]

As you basically said, the methods are in many cases independent of the machines. When I had a business I learned that quite often the most cost effective way to increase production and / or quality was to toss money rather than sweat and pain at a problem. The drill bits poke holes whether in a Jacobs or an Albrecht chuck, the cutters make chips with varying degrees of surface finish. Watching you show production of small fiddly parts is always interesting and usually a learning experience, as I learned most of the small scale methods doing watch and clock work, and you bring a different approach to the job sometimes. That isn't a lathe I'm familiar with here in the US, but it looks to be a really excellent machine. I hope you have many good years of pleasure and profit with it.

[@wrstew1272]

I’m very happy for you to acquire the quality of tooling that makes your transition from paid employee to shop owner. You deserve (and need) proper equipment to make a living. It does almost seem like a Christmas present to get what you explain as one of the best on the market, but that is because you have put in the effort to be in the position. You definitely are a wonderful teacher, and the techniques are what I come for, not the “glitter “ that you are able to justify by upgrading to better tools. Always enjoy your acquisitions and the patience you show in the explanations of how and why. Congratulations! Now for some chips and microscopic measurements 😂

[@rootvalue]

Not at all worried about your channel being unrelatable. I don’t do any machining. I’m a woodworker, so it’s really your production methods and zen philosophies that are fascinating to me. Good for you for getting another machine that will help your business grow.

[@MgBaggg]

Happy new lathe! If there something I've learned it's that when Stefan says he won't buy a machine, it's certain that he will buy said machine.

[@angelramos-2005]

Congratulations on your new lathe,Stefan.Good to know.Thank you.

[@josephlovell6951]

I personally appreciate your content. I get to see how you work through your work.

[@jeremykrammes1580]

I love seeing the new machines. I'm mostly here to see the process of how you do the work. And the cool European machines... Been on the hunt for a Deckle FP1 or an Aciera F3 for quite some time.

[@karlmckinnell2635]

Stefan your processes and explanations are of exceptional quality. I believe the only critique to be made would be quantity 😂 we would always be open to more content 😊. Thank you for sharing.

[@richharr]

I think your willingness to share what you know with everyone is why your channel is popular, I'm just happy you got a machine you wanted. Keep the videos coming.

[@jimforsyth2.]

Steffan has been way out of my league. But I love his work and his process. I learn all the time

[@campbellmorrison8540]

Wow I thought the Emco great, my dream lathe, I've never heard of a Primus. Watching you use any lathe is a pleasure.

[@ZAMsChannel]

Danke, Stefan. Ich kann immer was lernen indem ich Deine Videos anschaue. ✌

[@2lefThumbs]

Great to see someone who bought a thing show what it does with no buyers's remorse👍 That collet-closer is something I'd give an arm for (though I'd probably lose the other arm power-winding the damn thing within a day or two😉). I'm not sure why you mentioned the angst of losing potentially hobbyists, all of your content is crammed with useful information about planning and implementing a successful outcome using the equipment at hand, or explaining the benefits of certain upgrades. If you were just showing "must have" equipment, with Amazon links, that would suck, but showing ways of improving cheap gear and building what is needed with what is owned has always been the core of your content since I've been watching it

[@mikestone-w1q]

When I first discovered your channel you had the shaper and the pantograph. I doubt many people saw those and thought, "that's just like my shop!" I keep coming back because I like seeing the kinds of work you do and the way you solve problems. There's pleasure in seeing a skilled craftsman in action, and in hearing them think out loud as they work. I like watching Adam Booth even though his roughing passes move more metal than I put in a whole project, and Kurtis from Cutting Edge Engineering even though I'll never refit hydraulic cylinders longer than my house. Your knowledge, your interests, your standards, and your sense of humor make the channel worth following. The machines just keep pace with you as you grow. I'd rather watch you learn how to get the most out of a machine that costs more than my house than see you struggle with the limits of a machine you've outgrown.

[@ncforster]

I love your videos and even after 42 years in this trade I have learned many techniques which I use within my own jobshop, I am not to old or proud to learn! I find different countries use different methods which can always be interesting, sometimes better sometimes not . My tool room lathe is a smart and brown 1024 it was made in 1966 and is still supper accurate, the compound slide looks the same as yours just a bit longer 😂 I also have a DSG 17 42 lathe for my general work . Keep up the great work you are the future of this great trade Thanks Nick uk

[@StefanGotteswinter]

Thanks for the kind words!

[@pirminkogleck4056]

Congrats Stefan,i knew,sooner or later U either come Up with a Schaublin vm or a Primus. I am glad your Shop is growing and you are succesfull.

[@EverettWilson]

Don't worry about getting machines that we hobbyists are unlikely to buy. Hobbyist machinists on KZbin are a dime a dozen. Highly skilled professionals, sharing their knowledge, are incredibly rare -- and like you said, we can learn from you whether it's on an Emco or a lathe that can't fit in a garage.

[@felixm.8910]

Hey Stefan, congrats on the new lathe! At work we also have a Primus LZ, but it's a bit older (built in '85). It's an awesome machine. Very easy to use, very rigid, a ton of torque and really precise (when maintained properly). We almost exclusively do hand-sized and smaller prototype-parts. Last october I more or less rebuilt it after it got neglected maintenance and care-wise. Took apart all the slides, cleaned out all the oil- and grease-passages, put new seals on all the slides relubed and changed the oil and replaced all the bearings. I put a ton of tips and knowledge of you and other KZbin-channels into it. Your content really helps to deepen my knowledge in the trade and gives me an edge in knowhow to also help others get to the desired outcome. I sincerely thank you for that!! Greetings from Knuffingen!

[@DubsnSubsSessions]

Very nice lathe. I don't think it'll put off hobbyists at all. You've always produced high end work on here for hobbyists to aspire too and I think that's the appeal, seeing everything done properly. I started watching you years ago, got into it, bought a tiny lathe and mill and gained some experience, now I run a CNC vertical borer with a 2500mm chuck. That wouldn't have been possible without the teachings of a very small number of channels, this being one of them. Thanks, I guess!

[@braxtonec]

With a paper clip and some glue, you're still a more precise machinist from which I can learn something. Having your machine is no substitute for having your experience. Please continue as you see fit!

[@casiwaszkiewicz5196]

Stefan, great to see you succumbed to the allure of a Weiler lathe and spent time explaining its features critical to your business. The fact that they are as rare as hens teeth in the UK is neither here nor there. Although you shy away from calling it a teaching channel, your dialogue illuminates the transferable issues by shining a light from different angles. Pardon my mixed metaphors and keep up the great videos.

[@mikejack4532]

I am somewhat envious that you have a relatively new Weiler! I am proud to own one too but mine, a second hand LZ300 ( I think this must be the Praktikant size), must be from the 1960's. It was the first machine I ever bought when I joined a model engineering club in 1983. I knew nothing about machining at the time (I was only 21 years old) but I had a feeling that it would be a good machine. It turned out to be in very poor condition but over the years, as my skills developed, I fully overhauled it and I love it! I now work from home too. I am enthralled with your videos and only wish I had access to the techniques you're telling us many years ago.

[@hmh-jv6rn]

I am a true admirer of your skills and knowledge and that German trait for perfection. I can't think of anyone who would appreciate my HLV-H EM Hardinge lathe more than you when I decide to sell in a few years.

[@andreasthuerkow3144]

Oh very Nice :D I think this is the machine that Arnold was showing on the EMO last year. So i had my hands on this one before you did xD because i was looking for a nice rebuilt Machine for our R&D shop. Congratulations to this nice purchase!

[@StefanGotteswinter]

Yes! Also at AMB, if i remember right :=)

[@pressokaytocancel]

I am a wannabe machinist hobbyist, this content is still relevant, just raising the bar on my tool envy! :)

[@rcsracing98]

Re: your note at end - enjoy seeing your home shop growth You still relate to those of us at the beginning of their journey

[@michaelpiotrowicz6100]

Excellent. I have no concerns about your high end equipment and, despite your misgivings, you are an excellent teacher.

[@gwharton68]

Wish I had a machine shop or at least a few machines so that I could be like you. Keep up the good work.

[@strykerentllc]

Stefan, you hit the nail on the head when you referenced the processes as we found your techniques beneficial for doing prototype and one-off pieces. Congratulations on the new (to you) lathe. ps. Not many if any hobbyists have tool grinders or Tesa-Hite measuring machines, as we do. Cheers!

[@MartsGarage]

Thanks Stefan. That was very interesting. Nice analytical approach. Cheers! Mart in England.

[@roberthkack9633]

Congrats for the new lathe! I use to have a Primus and I loved it. Replaced it with an Matador because I needed bigger spindle bore. Keep up the good work BR Rob

[@StefanGotteswinter]

Thank you! (I think the Matador is the "better" machine, but also larger)

[@davidsnyder2000]

Man that is probably the best looking lathe I’ve ever seen in my life. I’m jealous lol😄 Nice machine👍🙂

[@paulbadger6336]

Well done 👍. Thank you for taking the time to share.

[@Cookie-cn2jc]

Nice upgrade. I think you are spot-on with the procedures and process being the objective. Working at 0.1mm on one machine and 0.01mm on another is just a matter of what the job requires not the method. I think being able to work at higher precision gives all of us viewers insight into how we can do better with what we have to work with if we pay closer attention to the details you illustrate.

[@microflux]

what you teach is priceless and timeless. your teachings will never be outdated.

[@kusler67]

Whoa my Stefansense is peaking. I was just thinking "I would like to see a new video" and boom 4 hours ago you posted this.

[@624Dudley]

Hello Stefan! Congratulations on the addition of that much gravity to your shop. 😄 I look forward to seeing the upgrades and refinements you will do. It seems like an excellent investment. 👍

[@ashreid20]

regarding your final comments: Your videos have always been both educational and apsirational for me. In the years I have been watching your videos I have become employed as a machinist and even made a version of some of the projects you have shown (I am making some gottes-zetti DTI holders now). I am working on getting my workshop at home kitted out such that i can do freelance work also. One day I may be purchasing a Weiler, who know's. Never stop pushing your self and we will do the same. Thank you for everything.

[@unpopular_mechanics]

I have a shop in my basement with tools that have been paid for by using them. It's both a hobby and a business. It grew over time and I buy increasingly better quality and more expensive tools. I find what you are doing to be very relatable. I'm sure that many other people do as well.

[@wizrom3046]

I think its great that you buy expensive machines. Machines that most of us could never buy (or WOULD never buy) so we get to see how a pro shop does stuff. The cleverness, precision and intricacy of what you do are the real stars anyway, the machines are just tools. 👍

[@orgonewarrior1604]

I say we vote if Stefan is allowed to evolve in his activities, seriously, congrats on the new sweetheart! A few years ago i was lucky to be able to drag one of those small revolver head (260) into my garage, i love collets now. Best regards from belgium

[@DudleyToolwright]

Beautiful machine. Seems like a Hardinge toolroom lathe for quality. We all lust after equipment of this quality.

[@noneofabove5586]

I always enjoy the content. Especially the solutions to work with what you have.

[@Justamanonamission77]

Holy cow Stepan! You are rocking the long hair! You are not only a brilliant machinist, but a Rockstar also!

[@petera1033]

By far my very favourite channel with the highest signal to noise ratio - atb for this year Stefan.

[@subuser9627]

Nice machine, I learned a lot from your approach to doing things. Sometimes is not how, but why.🙂

[@WestKyCrime]

I really enjoyed the Primus tour!

[@silentmachineshop8409]

Weiler lathe’s is the best! I have had 4 of them and I love them all. There are better lathes out there but not if you look overall on price on Sparepart etc compared to Schaublin and Hardinge etc. Weiler has standard measurements on bearings, leadscreew etc. keep up the good work Stefan!

[@StefanGotteswinter]

Yeah - They are not "the best", just as the Deckel - But as you say availability of spare parts is a big deal :)

[@silentmachineshop8409]

I also have a Deckel but a FP2 😂

[@jimsvideos7201]

Your time and effort sharing what you know is very valuable to me, by the way; you're exactly right that skills are 99% transferable.

[@brianmccusker3852]

Cool video and with a short scenic tour at the finish. Cheers to you and your cat. Thanks, you're doing the right thing.

[@matteomilazzo7616]

Top machine that perfectly fits your shop!!

[@crichtonbruce4329]

How can anyone not like "New Machine Day"? As impressive as that lathe is the feature that got me green with envy is the long travel compound. Many a time I've been frustrated wanting to turn a taper just that little bit longer than my compound's travel.

[@toddcumberland132]

Excellent , hearing your thoughts on this processes is illuminating. Do not worry, I will still hate you for your amazing machines and the ever increasing awesomeness of your shop. Keep up the great work and congrats on the new lathe.

[@vinh7251]

I’m glad you have a new tool and hope that it gives you good service, thanks for the intro. I see your approach as universal so upgrading the machinery doesn’t really impact the value of the content to me, I’m just glad to be a passenger on your journey and to pick up what I can along the way. You keep doing what you’re doing and I’ll keep showing up and smashing the like button before the intro is over.

[@AlanParkes-ch1nd]

We had 2 Weiller Primus lathes in our production shop. Beautiful precision machines. With the collet attachment and a Mitutoyo 3 axis DRO fitted, they were superb to operate.

[@bobvines00]

Stefan, I agree 100% that your processes and techniques are applicable in any workshop, whether professional or hobby. The biggest difference I see (as a hobby machinist) is that I can't (and don't really need to) hold the tight tolerances that you must hold for your customers.

[@OmeMachining]

Congratulations with the new lathe 😊💪 Its a real beauty 😊

[@Mike40M]

Looking good, hopes it serves you well. Seems a cleverly designed machine. As usual some gold nuggets from your experience.

[@Jon2jammy]

Hey Stefan, all your processes are relatable of course. I won't ever work(hobby machinist) to your tolerances or budget but I do want to hit my marks. If you sell your crappy old enco put it in a flat rate UPS carton and send it me in NZ and AND I will pay the shipping. Love what you show us and the thought process you explain and your humour. I watch you and the very rare Robin R vids for the same reasons very inspiring thanks. Olde Tony( ebircsbus) too. 😊

[@Engineerd3d]

Congratulations on the machine Stefan! Beautiful machine.

[@alexwbakker]

Killer machine. I’m a hobby guy, and I’ve never had trouble relating to your machines. They’re killer. I’ll also say, the processes are what matters. I’ve learned a lot here.

[@RocanMotor]

Stefan, beautiful machine, looking forward to seeing what you make on it!

[@gerritvisser]

Congratulations on being able to obtain the machines that you need. I pursued importing a Deckel FP1 late last year but in the end it was too much $$ for my late-in-life hobby. I did buy a new mill so in the end as you say a machine is a machine and it is what you do with it that counts. Your workflows and methods will keep me coming back for more. Thank you for continuing to take the time and effort to produce quality videos.

[@jeff1176]

Very nice lathe Stefan, im sure you will get the most performance out of it. I can't wait to see it in use. As far as being unrelatable, absolute nonsense. I'm not by any stretch of the imagination a machinist, but im learning with every video.

[@yuvalkatznelson2496]

Hello Stefan, 🎉 greetings for your new (rebuilt) toolroom lathe . It’s wonderful and l hope you enjoy working on it. Your videos are interesting and I do learn meany new things from them 👍 Thanks and keep on

[@larrycurts8112]

Congratulations on the purchase of a beautiful Weiler Primus lathe. To be honest, I was impressed with your Emco Super 11. This new lathe is over the top and I look forward to seeing all the amazing work you will do with it.

[@JanBinnendijk]

Sweet memories.. I learned turning on A Weiler Primus.. we had 4 of those at school.. and 1 Weiler Praktikant.. which was a tad bit bigger.. I Used to have an EMCO Compact 8 which is although a quite "lightweight" machine, a very precise machine a "Super 11" was on my wishlist for a long time.. but instead i first got the EMCO 8, sold that later, since i didn't do that much turning, Later i bought a Compact 5 CNC, a very small CNC lathe, not very stable, but quite precise.. i mostly turned Titanium on that machine.. i still have it.. later i got an EMCOturn 120 which is a much more industrial machine, but for small work.. which i do.. so the "120 " suited me perfectly.. i still dream of having a Weiler one day... You might not consider yourself as a teacher.. but then again.. i like to see what, and more specific HOW you do some things.. as i even with 30 years of experience under my belt still learn.. why?.. learning is fun, otherwise i might as well have stayed dumb.. 😁

[@garyc5483]

Nice lathe Stefan. You do what you do and I will keep following you. I like the smaller precision stuff that you do. regards from the UK

[@Mtematiks]

COngrats mate ! Weiler is one of the BEST lathes one can get!

[@kurtkrause7151]

Keep the vids. coming. I love the machines. My shop is small and I love your 'spacial' solutions. Rock on Stefan!!

[@adhawk5632]

Wow, it looks incredible. A new level of precision is in your future👍👌🇦🇺

[@tombellus8986]

You are the best show on this channel. I am amazed at the quality of presision and work. Ethics you show in all your videos. Stay safe and good luck in all your endeavors.