Step 1- How to fill an Uponor Underfloor Heating System

[@chriscarnegie4676]

Followed to the letter and not a sign of any air. Many thanks for posting the video.

[@sandrahanna1901]

I have a query that i hope i can get a quick answer to. The lid of one of my thermostats on the wall was not in properly and in trying to get it back in properly it came off in my hands. Then, i inadvertently clicked the red plastic fitting inside one tooth upward and the light on the thermo came on. So, i put it back to its original position and put the lid on, but the heating now seems to be permanently on. The light on the thermo is continually on. Can anyone give me advice please on, hopefully, an easy fix to get the light off. Thank you for any advice

[@TheLife0025]

Please show us how to connect the left side of the pump where main flow and return pipes will be installed. This part comes with 22mm x 3/4 Male compression. But if we have 16mm UFH pipe then there is no reducer from 22mm to 16mm available. how do we connect 16mm pipes to flow and return.

[@Michael-London]

Hello - I’ve had 4 ‘experts’ come around to try repair my Uponor 4 port manifold. None of them can resolve the problem. I think it’s because they don’t understand how it works. My thermostatic head appears to not operate properly and the pump over heats and switches off. Know anyone in london who can help me?

[@mysweetsmegma2648]

How come none of your western manifolds have air vent valves on them?

[@Beck-w8p]

western? Uponor is finnish company, twat.

[@Spritegtag24]

I purchased this manifold and later saw this video for temp valve and pump kit. They seem to be made for this manifold. I would like the same ones from the video or most similar. Do you know brand/model of this kit?

[@jmf5392]

Hi Martin how do you know which is the hot water flow into the blender before the red and blue shot off valves are on ?? cheers

[@henrykzajac4129]

Rotometers are on supply side...

[@yashven-8844]

Hello sir can you have work i need pulmbing job please

[@iulianbucur877]

Nu poți face un videoclip și cu traducere în limba Română. Thank you.

[@henrykzajac4129]

On promotion Video you should at least install protection tubes (red and blue ) between heat loops level and collectors and make that straight. Looks very unprofessional.....hmmm

[@2917mushtak]

STOPPPPP!!!.... Martin these "Uponor" video instructions are COMPLETELY opposite to your other "Multipipe" video that you've made!...kzbin.info/www/bejne/aX7Vo4Odgbenq68 in that video you said to fully open up all the "return electrical actuators" (1.20min), and then close off all the "flow meters" except for the one that you are filling/venting (1.30min). in this video your doing the complete opposite!...(it probably doesn't matter, because your still pushing the water and filling in the one loop, but was just confused as to why your not sticking with the one standardised routine) please explain