Step-by-Step Guide: Cutting and Programming Key for 2015 Toyota Camry | DIY Car Key Replacement

[@user-AlexAj]

Good Joob

[@aviglocksmith]

Thank you for your feedback. I'm glad you liked it.

[@timpham8288]

Nice video. When adding a new key, do you recommend using OEM blank key? Thanks

[@aviglocksmith]

OEM is always recommended, but I don't recommend used refurbished OEM. On this specific key, I see no issues with an after market key.

[@richardd4929]

How does the OBD / ECU transfer data into key/ key fob itself ? Is there a port I don’t see. Is it NFC. I’m so curious

[@aviglocksmith]

Hey. Each chip key have a different serial number. The key programmer write the key ID to the car's ECU through the OBD connector.

[@lindsayharris6631]

Do you have to be using an Aultel key? Or does any universal/ xhorse key work with the km100.

[@aviglocksmith]

It can program most universal keys. But if you want to generate a universal key , you can only use Autel universal keys.

[@maxl.8804]

i have a weird/unusuall situation trouble. 2016 toyota Camrry (tried XTool, Autel im508) it will program key fob into vehicle no problem- vehicle responds by beeping back (after holding Lock &Unlock than single click on Lock button) but when trying keyfob buttons none of buttons work- vehicle Does Not beep! 1 original key and 2 new aftermarket keys-- All start vehicle fine-no theft light---but Fob Buttons just not working on all 3 keys. (on scanner shows 3 key fobs been programmed already) -- no codes anywhere : BCM, TPMS, ECM, Immobilizer no codes --i believe it uses TPMS module and use same receiver antennas for key fobs. i checked TPMS module have no codes, All tire sensors programmed all tpms data shows ok--so the module is alive. but no data anywhere on this particular 2016 camry to see if it actually sees me pressing keyfob buttons. --even tried OEM toyota tpms module -and still same issue. so yea i have a good one to figure out. Any help i would really aprecciate! ( im fresh to key cutting n programming)

[@farajalhusaini]

thanks a lot but why you are do not like to copy the original key?

[@aviglocksmith]

Every remote head key, the head of the key is too big to fit in my duplicator. so, I use different methods to make the key.

[@farajalhusaini]

GOOD LUCK@@aviglocksmith

[@aviglocksmith]

U2

[@Cryptony1975]

Where can I get this done in Connecticut? I bought a blank toyota key fob on ebay and need to copy my original to that and switch electronics and transponder

[@aviglocksmith]

You should find a local locksmith. (I'll recommend looking for local ones on Google maps with good reviews)