Step-by-Step Guide: How to Install and Operate a Sealing Tester?

[@testchamber_yuexin]

Have you learned how to install and operate the sealing tester?🤗

[@VortexLuna9-o9h]

The water adding step can be made more convenient, why not design an automatic water adding function?

[@testchamber_yuexin]

The current design is to ensure precise control of the water level and operability of the operation, and users can flexibly add water as needed.

[@LuxeVibe23-q7d]

Why should we use purified water? Isn't tap water OK?

[@testchamber_yuexin]

We recommend purified water mainly to avoid impurities or minerals in the water causing scale buildup inside the device or affecting the test results. If you don't have purified water, it's perfectly fine to use tap water, but we recommend cleaning the device regularly.

[@StormKraze3-r5v]

During the test, the negative pressure setting is too complicated and people who don’t understand it may not be able to adjust it properly.

[@testchamber_yuexin]

Regarding the negative pressure setting, it does require some experience for some users. However, you can adjust it according to the method in the video.

[@HyperNeonX-z2q]

There are too many pressure value adjustments mentioned in the video, and normal operation does not need to be so complicated

[@testchamber_yuexin]

Indeed, for most users, setting the default value is sufficient.

[@Lisi-v9j]

Acrylic is not durable and will age after long-term use. Why not choose a more durable material?

[@testchamber_yuexin]

Because acrylic material has the advantages of high transparency and easy processing, but it does have the problem of easy aging and discoloration when exposed to light for a long time. It is recommended that users choose a light-shielded placement area.

[@CyberPulseX-h2z]

The installation steps are too complicated and not suitable for beginners.

[@testchamber_yuexin]

Indeed, there are some details that need to be paid attention to during the installation of the sealing tester, but you can follow the video to connect the air pipe and power supply step by step.