Step by step how to fix the problem mercedes electronic steering lock with esl emulator , full video

2011 mercedes c300 with a message “remove the key from ignition”
It has bad esl electronic steering lock on lock position .
Complete step by step from start to finish
Removal and installation
Replacing it with esl emulator
Please support me by donating so i can keep making great content.
Paypal: [e-mail]
Cashapp: $AutoPurlieu
Venmo: @Legend_gary
Thank you
Join this channel to get access to perks:
/ @autopurlieu

[@csixtythree]

this is literally the best video for this problem. ive dealt with this on a few cars and when i need to double check on a step i come back to this video

[@autopurlieu]

Thank you, I appreciate that 🙏

[@robertroldan4736]

such a good mechanic and has a good memory to put back everything....excellent job.

[@autopurlieu]

Thank you sir. I try my best to organized in my own memory lol

[@jamespipkin373]

That hood will go straight up 90° got to love German ingenuity

[@godswillbinitie5150]

Reasons why i love watching your videos is your well detailed explanation Keep it up Boss

[@autopurlieu]

Thank you for your support 🙏

[@bruno_mcd]

You're a legend. Just had this exact same problem, and I don't want to spend close to 2000€. Will take care of it ASAP! 😊

[@autopurlieu]

Great. Let me know if you need assistance 👍🏽

[@eziakahtarango1066]

@@autopurlieuhey would u b able to do a emulator programed with a key already ?

[@autopurlieu]

@@eziakahtarango1066 hi, I need more info . Like what car year and model . Message me on FB “Auto Purlieu” so I can further assist you

[@boogiemanshow8400]

Thanks. Man. That was real cool of you. Step=by=Step too, with good, clear footage.

[@autopurlieu]

Thankx for your support brother 🙏

[@josephprosper853]

Oh my just what I needed..I will plan to come over for training at your place in the future. Great job.

[@autopurlieu]

Thank you for your support

[@JoseLuna-xt1rz]

Genius my friend. I admire you taking on this job and identifying the initial issue. How much would you think a job like this is reasonable?

[@autopurlieu]

Dealer charge from $1600-$2000 depends on location

[@farhadghanbari1845]

I have a 2008 Mercedes Benz C300, I tried to start the car and it said “take your key from ignition “ I went to a Mercedes dealership and they said they are going to charge me $800 to fix it. It is too much for me. I want to know is it okay if I only change the ignition switch? Will my car work perfectly then or I have to change steering wheel luck as well? I actually don’t need to luck the steering wheel, if I don’t change it will it be a problem? Thank you for your time and guidance!

[@farhadghanbari1845]

I messaged you on Facebook messenger as well, will appreciate your help!

[@anthonybantula1161]

Nice content boss napaka helpful para sa maraming. manonood Godbless done 🙌

[@raymondarias8459]

You are the man bro👍, great video, thanks

[@autopurlieu]

Thank you

[@mhargiecasica7493]

Keep safe and thank you for sharing your blessing to us

[@mikevlad13]

Great job man! I got this problem right now.👋

[@autopurlieu]

Thank you , I know you can get it done as well

[@aashzlifeadventures]

Same here Just got it few days ago. Sydney, Australia.

[@autopurlieu]

@@aashzlifeadventures best of luck . Its doable

[@sanyakelvin2106]

Wonderful, you so talented thanks bro for ur simple nd good direction bless you

[@Dashikardashian]

Omg I finally found a video of what I needed!!! I will not be doing this myself , due to the fact I have a warranty, but I’m just happy I came across this video. I must ask, how does this problem even occur??? Like what causes this ?

[@autopurlieu]

It’s a common problem on its parts. I’m surprised it wasn’t a recall

[@mkd3351]

It's the motor that retracts the pin from steering lock fails

[@Dashikardashian]

@@mkd3351 so it’s just randomly? Or is it caused by something?

[@gersonlopez2094]

Mr legend Where do we get that part? Plz

[@JOSEF7011]

It is caused by turning the steering wheel after removing the key. For example, when getting out of the car, you hold onto the steering wheel, the latch locks the steering wheel, but the tensioned steering wheel does not allow the latch to be unlocked. There's even a counter that counts the wrong unlocks, and after a few failed unlocks the steering wheel lock locks up and has to be fitted and a new one programmed. It is possible that you have inadvertently caused the fault yourself :-)

[@taz8436]

brilliant video with superb detail weldone

[@autopurlieu]

Thank you

[@robellynnonsol5935]

Ganda namn po ng car mo. 😍😍 keepsafe po.

[@josueisrraelgozgomez9624]

Este sí es un buen video gracias máster

[@autopurlieu]

Muchas gracias

[@princeszovelleagustin9997]

nice car and thanks for sharing this very helpful video sir

[@stretch5832]

I watched these videos and shake my head. Most of them on here do it this way. But there is one I found and I did it his way so I know it works. The guy show you how to do this and he only removed the bottom bolts and loosen the top two bolts to allow the steering wheel to be lowerred just enough to work with your hands. Took me literally 15 minutes to remove everything and about the same time to install it back to original form. THE KEY IS YOUR Steering wheel HAS TO BE UNLOCKED

[@autopurlieu]

You are right. However , there are lot of them (just like this video) that the steering lock is in locked position . So it’s easier to drop the whole steering column and do all the work 👍🏽

[@davidsaunders7118]

Where’s that video bro

[@autopurlieu]

@@davidsaunders7118 what video are you looking for? If you’re looking for removing the esl without dropping the whole steering wheel and steering column. Right here But your esl or steering wheel must be in Unlocked position kzbin.info/www/bejne/jHeofGabhrp4lZIsi=YG4vMOItnj0KWpea

[@arlethsadian3030]

Newbie lng po tnx po sa pgshare ganda ng car

[@antoineduplessy6009]

Nice video,by the way you worked very hard for a so called lazy 😇😂😂🔥🔥🔥 thank you

[@autopurlieu]

Thank you. I always try my best

[@waynesworld6989]

Great job recording... verry verry informative

[@autopurlieu]

Thank you brother, and for your support 🙏

[@terrenceclyde]

Nice Video sir. Nice car also Love it. DONE

[@aashzlifeadventures]

Thank you so much sir.

[@kristineacebes9113]

Great job sir , napaka galing talaga' DONE

[@gretchendelacruz3462]

Thank you for sharing your video

[@gemmaquilongquilong1945]

Blessed Happy Sunday Po Sir gosto Kong sumali First time ko na kita and Chanel ninyo I watching from San Antonio Nueva Ejicia Very Nice ang programs ninyo wala akong alam sa sasakyan Dahil na kikisakay lang ako may Community may car before I stay and convent 20 yrs I am Sr Gemma may Baptism name , Paulina Peter is may Religious Name I Happy for watching your chanel Thank God Bless

[@jolinag.officialteamohio2778]

Wow Nice Car ,keep safe always 🥰

[@kennethtalbott2233]

now that's a fiddly job. well done.

[@autopurlieu]

Thank you sir 🙏

[@obaidaalhashemi8679]

you are my hero . it was so helpfull

[@autopurlieu]

Thank you for your support 🙏

[@alanmos9224]

Thanks men,, you save me

[@autopurlieu]

I’m glad it helps

[@joceliaugbamin9526]

Hello po sir good afternoon...wow nice car

[@evelynego-ugan3108]

Watching, ADVANCE HAPPY NEW YEAR PO

[@thejack9232]

Are you Great video, what type of camera set up? Do you have to get these great videos? When I’m working on my car, I like to make my own videos, but I have a hard time with the camera angle.

[@autopurlieu]

I just use iPhone

[@keziamaesualog6915]

Done Kezia sualog Very nice

[@daveycrockett9447]

The worm gear motor is what goes bad. You can buy one for as cheap as $10. Replace the motor in the ESL module, you just removed and dont need to reprogram anything. Much easier.

[@autopurlieu]

But with all the work you have done then the motor goes bad again. In some people , they pay labor rate for that. I program esl emulator , I have plenty of customers that went to replacing just the motor and keep going bad in less than 3-6 months . The emulator has very low chance to go bad

[@woodwheel750]

i just paid 1650 to get this done on my 2014 cls550 smdh wish i would have found your channel first

[@autopurlieu]

Is that a dealer price ?

[@woodwheel750]

No sir dealer was higher

[@autopurlieu]

@@woodwheel750 that’s a great price compare to dealer.

[@rafiekahmed8568]

Hi thanks for sharing really much appreciated I have a question is no there programming required for the emulator is it just plug and play

[@autopurlieu]

Hi, the emulator needs to be programmed to your car. I do that service if you need help. You can message me on Fb “Auto Purlieu” kzbin.info/www/bejne/nHi4f4StfpyiocU

[@thesssebastian9062]

Done. Keep safe always..

[@70looney]

had this on e250 esl went luckey it was off so it was easy to replace saves time if goes when not locked new one from main dealers and the green key to go with will need id and docments

[@lgcarkeyNJ]

Excellent video, thank you for the very detailed explanation, my question is how much do you charge for all this work?

[@autopurlieu]

Each car is different. Find and message me on FB “Auto Purlieu “

[@macqueschannel5616]

My dream car!

[@maloubailloestrera1891]

Wow nice.....

[@rossyndosi8501]

Great Video i got the same problem with my GLK, can you tell me where do you ordered your ESL emulator with key already programmed ?

[@autopurlieu]

Message me on FB “auto purlieu “ I program ESL Emulator specific to your car . kzbin.info/www/bejne/pKrLZI2bi81ofsksi=gGTSn4F6K0Vu50pW

[@daltonspecial8336]

Awesome video !!!! Can you use the old key and ignition box after adding the emulator. Or do you need a new key and ignition along with the emulator to get programmed together. Can you tell me the cost of programming all or whatever is needed. And if I have to buy a new key and ignition box. Thank you so much.

[@autopurlieu]

Message me on Facebook at “auto Purlieu “

[@analizagalaurasvlog4261]

Watcing po Enjoy vlogging po

[@user-qq7xj5nq3p]

Better best from you man

[@Blogs1.]

i find it interesting because my EIS went out and its a 800 pallor part from benz for my 2009 c350 sport

[@autopurlieu]

And it could happen again . That’s why emulator is the way to do it 👍🏽

[@alanmos9224]

Thanks!

[@abdelhalimbahi5541]

Merci mohandis

[@angeloalbidastiniovlog5833]

Wow nice

[@user-vk9yt6hc9n]

When it is replaced are the keys replaced as well or do you keep the same keys

[@cravingsunleashed4880]

excellent video my friend, thank you for taking the time and showing the details. Now the question: where did you get the bypass esl i have a job to do on a 2008 C300 having the same issue, i can get the car to start after moving the steering wheel up and down making it knock on the column, and then it works..... i want to take the esl out and put a bypass plug and play just like yours, I've seen some emulators that need to be program, to do this you plugged in the bypass and a new key right, no need to program anything ?? I'm kind of lost , thank you for the response ahead of time

[@autopurlieu]

I just ordered it from a friend of a friend. I don’t have a programmer that capable of doing Benz cars I just installed this and did all the mechanical installation part. I believe you have the same problem. Just eliminate it and you won’t have that problem again

[@cravingsunleashed4880]

@@autopurlieu so just instal an emulator without programming it ? I thought they need to be programmed

[@autopurlieu]

@@cravingsunleashed4880 it needs to be programmed. I was just saying that someone else programmed it to me .

[@intherealworld1188]

The early chassis use the plug & play type emulators. The 204, 207 and the 212 chassis use this type and it has to be programmed. This can be done by a qualified person with the proper equipment on the car or the EIS (ignition swtich) and the key can be sent out to get the emulator programmed. The specific one he is installing can be purchased though the mail for around $120 incuding the emulator, shipping and programming.

[@m4ravish]

@@intherealworld1188 where ay excuse me??? I need one for my mercedez

[@xaviermedia8988]

Hi bro You are very very God, can you please tell me were and what's the cheapest simulator for my 1999 430 clk and how would I get everything programed vro I'm broke down in a small town and definitely need your help 😣

[@user-qq7xj5nq3p]

Good job bro

[@autopurlieu]

Thanks brother

[@angie27vlogteamohioadmin]

Wow nice car 🚗

[@ailenealcaraz6640]

Nice car ❤️❤️❤️

[@yedidiadahan8088]

was the airbag light on before the repair? or did the module removal set the code?

[@autopurlieu]

It’s been on. The car has prior accident and whoever fixed the door panels , didn’t replaced the airbag door sensors.

[@agoodneighborautorepair2176]

Very nice explanation and information, blessings, do you have the parts number or kit information, and the tool to remove the switch?.,thanks again

[@autopurlieu]

Hi, thank you. When you say “ to remove the switch” you mean the electronic ignition switch (eis)?

[@autopurlieu]

You can go to Amazon and type “eis Mercedes’ removal tool” They have plenty of them. 👍🏽

[@agoodneighborautorepair2176]

@@autopurlieu yes,the blue tool to remove the big nut, and the parts or the link the you remplace to cancel the steering column lock model, please

[@agoodneighborautorepair2176]

@@autopurlieu thanks

[@autopurlieu]

@@agoodneighborautorepair2176 the emulator was made and programmed and orders by a friend of a friend. That was when I was working on this car awhile back. Now I can make and program the emulator now. I will need the eis and the working key to get it done. Message me on FB if you like order 1

[@Dnasty1]

Great video. I think the previous owner of my car has installed this emulator (because my steering wheel never locked) and it has just now gone out on me. Can I just purchase another emulator and swap it with the one under the dash? Or do I need to take everything apart like you did?

[@autopurlieu]

Thank you. If it’s just dangling underneath , you can just unplug and replace another one. But still, that emulator still need to be programmed to the car eis

[@Dnasty1]

@@autopurlieu how do they program it do they need access to my car?

[@autopurlieu]

@@Dnasty1 it needs a special programmer for that. Emulator + eis + key , needs to sync in together . Technically those 3 is all needed so the locksmith can program it. Each programmer is different, depends on a locksmith and their skill if they need the whole car or not.

[@johnsondml]

I thought it's just plug and play

[@autopurlieu]

@@johnsondml for this specific car, it must be programmed. Some other models are plug and play. And in this situation, the steering lock is in lock position. So that must be removed first too

[@johnclinton9940]

did the same exact repair yesterday on mine glk350. I noticed on your video and my car also, when taking corners, steering wheel won't center it self and I manually have to turn it back to center it. I noticed your car was doing the same thing. Any sugestions?

[@autopurlieu]

Did you mean with the power steering ? Power steering works. It was just the steering wheel was a bit off at first but I have to reinstall it and make it center

[@eminecetinkaya2907]

Correct, power steering. I notice you had to turn the power steering manually or at least assist because it wasn’t returning back to center which supposed to. My car start having the very same issue after the repair.

[@richardnazar1214]

DONE ❤️

[@bobc7733]

Great video.I am having the exact same problem,I've got as far as removing the airbag but cannot loosen the steering wheel nut.Please can you say what sort of impact driver you used ? Make and model or at least it's power capabilities would be great , Thanks.

[@autopurlieu]

Actually, a long breaker bar works. Steering wheel must not be moving when you do it. Even a good impact gun won’t budge if the steering wheel is not stationary

[@erwincabrera1741]

Good job I have the same problem were can I get esl inmulador

[@autopurlieu]

@@erwincabrera1741 check my other videos. I can provide esl emulator and program them to your car . You can message me at FB “auto purlieu”

[@emanueldringa2337]

Great job, ❤I'm facing this problem today.😢.. is there any coding to be done with the computer after attaching the emulator?

[@autopurlieu]

@@emanueldringa2337 Yes , the esl emulator must be programmed specifically to your car. I do offer that service , includes the emulator . The esl emulator must be programmed before installing to the car Message me on FB “auto purlieu” to further assist you ., with your car year and model

[@rocfamilyvlogs8060]

Sana all my magandang car

[@emanueldringa2337]

Great job, ❤I'm facing this problem today😢... is there any coding to be done with the computer after attaching the emulator?

[@autopurlieu]

Yes , the esl emulator must be programmed specifically to your car. I do offer that service , includes the emulator . Message me on FB “auto purlieu” to further assist you ., with your car year and model

[@vanessajotojot2940]

Done po👍

[@mara9958]

I have to check this out

[@charlottebradecina9217]

Done subscribe.

[@emanuelearena4087]

very good

[@Renegada-ei1ll]

Good thank

[@JER1334]

I didn't see in the video where you removed the hood latch cable from the panel under the steering wheel and I'm having some trouble with that. Any idea if there is a video on that floating around?

[@autopurlieu]

That has a screw

[@autopurlieu]

@jer1334 22: 14 on this video kzbin.info/www/bejne/jHeofGabhrp4lZIsi=t5TjlvMUxSASnqNA

[@simsauto]

Hy can you please tell me if the key fob is stuck in the ignition switch i need to change this parts like you or is just the ignition switch fault.thank you . Nice video😊

[@autopurlieu]

If the key fob is stuck into the ignition switch. You might have a defective ignition switch too. It shouldn’t be stuck

[@simsauto]

Oh nice and thank you for replay

[@sconey13]

Your Emulator Just Hangs It Doesnt Bolt Up To Where The Old ESL Was Placed? Also You Got The Air Bag Malfunction Light On Even With Removing The Ground From The Battery? Thanks

[@autopurlieu]

Yes, my small emulator just hang anywhere/ zip tie it or wherever you wanted to place it. For the reason , some esl doesn’t to come out if it’s in unlocked position . And it’s very concealable . With this particular car, srs light was on because it has a collision on right door. If the air bag malfunction light comes on after the installation, that can be cleared by a good scanner with ABS capability

[@carminadeguzman1877]

nice

[@milmayanquillano3446]

Nice car

[@jettakubra]

Good morning sir! I came across this video as my car just did this yesterday. Where can I get the emulator? And if ever how do I get it programmed as Im up here in Toronto. Thanks!

[@autopurlieu]

What year and model of Benz are you working on ?

[@jettakubra]

@@autopurlieu Its a 2011 C300 4matic

[@autopurlieu]

@@jettakubra you have to find a good locksmith that can program that emulator to the IES. Pare, Find me on FB “Auto Purlieu” Tulungan kita

[@smailidrissi1833]

Please i need a help i have a problem with my mercedes w204 model 2009 the dashboard shows these problems default assisted direction Ebv ESP ABS can u tell me how to solve this? Must I change the ESP system? Any idea thank very much

[@autopurlieu]

Does your car starts ?

[@smailidrissi1833]

@@autopurlieu yes it starts normally when i accelerate more than 20km/h the signal of ebv esp abs indisponible then the steering wheel becomes rigid but the power of the vehicle remains normal

[@autopurlieu]

@@smailidrissi1833 looks like you have a power steering or abs related problem. Find a good mechanic with a good scanner to diagnose your problem.

[@smailidrissi1833]

@@autopurlieu thank you so much for uour reaction im really grateful

[@alkhashtee]

It will be easier for you if you drop the whole steering column assy and let it sit on the seat/your lap

[@autopurlieu]

I had to dropped the whole thing for this kzbin.info/www/bejne/lXbEiZWfodN_r6s

[@crypticpath]

The part is $400 for my GLK350. But the dealership would not sell me one with the programming key. It had to be tied to a service order, $2000 USD repair. But I am going to try another dealership, if they will not sell me one I will just go emulator route. My ESL is starting to lock up randomly. I can get it to unlock by banging on the steering wheel. If its unlocked I can remove it easy enough without taking the column out.

[@autopurlieu]

Let me know if you want me to program you an ESL emulator. Yes, that’s the average price on that repair. Even they give you just the ESL part,,you will need to program it still. The esl must be same program and sync in with the Eis and the key fob . Downside of getting the OEM ESL, it will again . It’s about when it’s gonna happen again . Getting stranded sucks

[@stevomicic2093]

Did you have to program a new key and right with that emulator and how did you do it? Does it cost a lot?

[@stevomicic2093]

And lock*

[@autopurlieu]

I just ordered it from a friend of a friend. I don’t have a programmer that capable of doing Benz cars (at that time) I just installed this and did all the mechanical installation part. Same old key and eis needed to program the emulator

[@2MasterBuilder2]

Wassup brotha. Mine failed in the UN-locked position. Will I need to remove the entire steering column to remove the old unit? Thanks for the video my brotha

[@autopurlieu]

If it’s unlocked. You don’t have to. But go ahead disconnect the wire that goes to the ESL “steering lock” so there’s no chances it go back to lock position

[@2MasterBuilder2]

Awesome. Thank you

[@farhadghanbari1845]

Hi, I have 2008 mercedes benz c300 and i have this problem too,i want to know If I change just ignition switch my car starts up, because it costs me too much to replace both.thank you 🙏🏻

[@autopurlieu]

If you think it’s your esl is defect, replacing the ignition switch will not fix it. You ah e to replace the ESL or bypass it with ESL emulator . It’s like having an alternator problem then replacing the battery will not fix it . Either way, replacing the ignition switch will need programming aswell. Are you in the US? I can make and program you an ESL emulator specific to your car. Message me on FB “Auto Purlieu” You have to do the work of removing the parts and installing it . Or find a mechanic to do the install and removal.

[@frankmensah53]

Good job

[@ADDMEONPSN]

Question will a 06 Cls500 need key programmed with this?

[@autopurlieu]

You mean esl emulator programming. Almost same situation just a bit different process .

[@OscarHernandez-rj1dl]

So what did you do? Program it first and then put it in there?

[@autopurlieu]

Yes, just program it or else it will not start

[@pattypino446]

Done Patty Loyola

[@maryannoribia5481]

Sana magkaroon din ng car🙏♥️

[@aiiyebatrina12]

Hoping po😊😊 Done

[@XxL3GITSWAqqxX]

I need help on a 2002 Mercedes’ Benz c32 amg had a guy that ordered a new ESL elv emulator and programmed it to the car. Steering wheel is not locked. Keys is new and is programmed with eis. Can you let me know what else will be wrong that won’t let my car turn on?

[@autopurlieu]

Is it programmed properly? Did you ask the person who programmed your esl emulator and tell him what’s going on?

[@kathyjanoras5355]

Wow ang gara Naman. High tech pa. Sending love and support Kathy Janoras fb name

[@tredeep333]

What are the tools you used for this vid

[@sendavid1981]

Hi buddy...i have a qestion...the emulator must be programmed? Is the key you used new or is it the same one you've had? greetings

[@autopurlieu]

Yes. I can make the emulator and program it myself. I used the same original key. It only has 1 key fob

[@sendavid1981]

@@autopurlieu Another question, here in Chile it is difficult to get car mechanics these days, I can install the emulator and ask another car mechanic to program it???? Or could I do it myself or do I have to have some special electronic machine to do it? I need your guidance, thank you very much, excellent youtube chanel

[@autopurlieu]

@@sendavid1981 you need a programmer to program it. It’s better to find someone who’s capable of doing it

[@eddenursonal1220]

Nice po Ang car

[@richardjt5780]

I have this exact problem, do you think its better to replace the broken esl with another esl motor or emulator? People said emulator is better since new esl may break again but what about security?

[@autopurlieu]

I might be bias because I make and program an esl emulator to every customer I’ve had contacted me about this problem. For the past years none of them came back nor went bad. We already know that the OEM ESL goes bad, so putting the same OEM ESL will go bad and it’s the matter of “when” it will go bad again. And the price of OEM is close to $2k or more I’ve seen some emulators that fail but those are the older emulators , that has wires dangling. My ESL emulator is well proven and tested. Come message me , find me on FB “Auto Purlieu” . I can help you with your problem

[@autopurlieu]

kzbin.info510eteory5U?si=JQQSFHplTrhbcN9H

[@autopurlieu]

kzbin.infoac_dQvk3Cvc?si=AaUuoXi1Y8k5myMj

[@richardjt5780]

@@autopurlieu I saw that if your battery went flat and have to replace it with new one, the key not working thing will happen again even with emulator? How true is that in your experience. Saw it on FB post at w204 forum.

[@autopurlieu]

@@richardjt5780 that means you have other problem than the esl. Battery don’t go flat normally, either your alternator is bad or battery or combination of both. And that’s depends in what kind of emulator are you using. Some emulator has personalization feature and that will happen to it. And the one I used is more simpler kind . It’s all depends on how it’s programmed and what type of emulator is used .

[@samartz]

This is a lot harder than i thought it will be, time to send to mechanic…

[@autopurlieu]

Let me know if you need any help. I’ll be able to assist . I can program you an esl emulator

[@robbytariman4055]

😍😍😍 done

[@selenabest6399]

I am having this issue but my key fob keeps getting stuck and hard as too come out but now that I finally got it out it won’t go back in and the brake abs esc inoperative comes on & then steering wheel lock malfunction inoperative comes on but I drove too the store turn car off too get out then the key got stuck and then the car turned off & then wouldn’t turn on at all I’m thinking the steering lock & ignition switch went bad how can I fix that

[@noodle9851]

What size are those 4 bolts for the steering column

[@buscanomyrna6214]

Done po🙏🙏💖

[@adrianmendieta1110]

Si it possible yo change the esl and/ora evl with a RFID system?

[@autopurlieu]

Hi, sorry but I don’t understand when you said RFID system?

[@vernavillanueva8166]

Verna Villanueva DONE

[@guillermomadrigal4683]

What if the wheel is not locked how much of this do you have to do. On a 2012 gl450. Can you unplug it with out taking DAZN apart and steering wheel off.

[@autopurlieu]

If the electronic steering lock (esl) is in unlocked position . If you can reach it and unplug it then install the programmed esl emulator .

[@guillermomadrigal4683]

@@autopurlieu so you have to program the Esl?

[@guillermomadrigal4683]

@@autopurlieu do you know if I’m a 2012 gl450 you can reach it to unplug?

[@autopurlieu]

@@guillermomadrigal4683 yes, must be program to your car specifically.

[@guillermomadrigal4683]

@@autopurlieu hmm the one I bought said no coding. Plug and play, but idk…. How do you program?