Step by Step Tar Free Gasifier 2.0

  Рет қаралды 106,530

Scoobyist

Scoobyist

Күн бұрын

After a long pause!
I upload the best gasifier I build until now!
The heart is from www.woodgas.nl micro gasifers.
Soo enjoy!
Also the music is more relaxing,
the English got better,
as the weldig ...
soo its a 2.0 :D
For the plans:
woodgas.nl/micr...

Пікірлер: 51
@bournphree7565
@bournphree7565 7 жыл бұрын
What is a prefessional Woodgas Company?
@menotticalliari
@menotticalliari Жыл бұрын
Olá, gostaria de tirar dúvidas com você podemos conversar?
@tryducky
@tryducky 12 жыл бұрын
Really what would be point of wasting 20k-30k in this , just go buy oil.....your part of the problem with this world of greed !
@Scoobyist
@Scoobyist 12 жыл бұрын
What the heck?? Whats special about it? Its just tubing (you can roll them also yourself), Its a saw that makes plump cuts, a good welder and some generator unit .... nothing else??? The genset is made to run for 15 years with just some oil changes! And you can capture all the heat to heat the house, greenhouse what ever! Nearly nobody in the US uses the exhaust heat to heat a house ... Also All powerlabs doesn't! Oil seems to cheap! We pay around 3.50 €/Gallon for Diesel/Oil for the furnace
@DBPR01
@DBPR01 11 жыл бұрын
you can build a fairly simple gasifier for less than $500 and run your 5kW genset all day long on limbs and scrap wood that cost you nothing and kill no living trees. I am currently running tests on tree waste on a larger system; current ROI projections are 3 years on a 60KW system based upon the numbers so far. Running solely on feedstock that otherwise would end up in the landfill...
@kerplunkboydotNET
@kerplunkboydotNET 6 жыл бұрын
I'm interested in the consumption/production ratio. How much wood would be necessary to produce full power? Like to power a house for example, how big a generator I need and how big should the gasifier be?
@Scoobyist
@Scoobyist 12 жыл бұрын
A few guys been asking for the CAD Drawings! I think its easier to check out just the drawing from DJ: woodgas.nl microgasifiers The link you can find in the video description! A little over the half of the Page you can find a Hand skizz from the dimensions! I'd change the Rost as explained! Especially when you plan on using Woodchips G30
@caseyjo2566
@caseyjo2566 9 жыл бұрын
nice work!! I've built one, and now another. what kind of blower are you using? I googled by-pass compactor, but didn't find what I hoped. I have a blower that has such tight tolerances, the slightest tar will gum it up. I'd be very interested in finding out more about yours. thanks!
@servteqh
@servteqh 12 жыл бұрын
Hey Good to see the nice work you have been doing. What kind of engine are you using ?? Keep up the good work....!!
@MegariaGang
@MegariaGang 12 жыл бұрын
like this video and also its background music... what is the title of the song and the singer's name ?
@Scoobyist
@Scoobyist 12 жыл бұрын
The exhaust ist used to heat up water, to heat the house! The fancy red, and big black box behind the white post are heatexchangers to capture the heat from the exhaust gases!!
@harrycave6309
@harrycave6309 2 жыл бұрын
Sooo if you wanted to make as much tar as possible but still create some gas how would you go about doing that?
@lambretatuga
@lambretatuga 11 жыл бұрын
Forget the crap comments.good work.Thanks for video
@dennisbland6559
@dennisbland6559 2 жыл бұрын
Anyone from NC ( Ralegh area) want to work on 1 together?
@Igo2slo4u2cme
@Igo2slo4u2cme 7 жыл бұрын
Rost? What is a rost?
@Scoobyist
@Scoobyist 12 жыл бұрын
Jep!! Thats the Trick!! Nothing else! But in this size 2-5kW the Imbert Dimensions don't work, because the heart would be just around 1inch (2cm) and no coal could pass the restriction. So there are some teaks nessecary!! -> What i wanted to achieve, that its easier to run so you just have to fill up a big hopper and besides ash cleaning there should be no other Maintenance work to do! So you have the same maintenancing like a pellet oven (fully automated)!!
@daddynunya9045
@daddynunya9045 2 жыл бұрын
Loved the video and the effort you put into it, but, as the captions are unreadable on my screen, totally useless to me. The design is really interesting and I would love to learn more, especially the tar removal. Any links to any relevant information would be appreciated. Thank you.
@michaelhofstrand4151
@michaelhofstrand4151 2 жыл бұрын
Well, I've decided to try out your design o er many others. I have a couple addon ideas I'll try to get implemented of course i will keep you updated.
@xoxoXoieoxox
@xoxoXoieoxox 12 жыл бұрын
if its made proplerly an inbert has very little operation drain fluids remove ash and reload i realy wish all the in fo that was dicoverd buy this in the early years didnt get lost. now were forced to learn it all over again i think that sux =3-
@xoxoXoieoxox
@xoxoXoieoxox 12 жыл бұрын
u do realixe that all u have done is created a imbert gasifier all of us gassers need to do only one thing stop trying to reinvent the wheele and just make woodgasers that WORK how cares if its all fancy =3-
@Wood-For-Power1
@Wood-For-Power1 9 жыл бұрын
Good presentation man. Do not let the thumbs down'ers; the nay-sayers; armchair critics get you down. Any day burning wood-for-power is a good day. Burning is learning. And IC engine running is learning well. Washington State Steve Unruh
@aircreteautoconstruccion1186
@aircreteautoconstruccion1186 2 жыл бұрын
Any update within these 10 years? Thanks a lot for your work
@victoryfirst2878
@victoryfirst2878 3 жыл бұрын
I am really liking you logic of making the gasifier do its thing with improvements as you move along. Keep on making great videos and have a Happy New Year too. V
@carmatic
@carmatic 11 жыл бұрын
since it is all pictures i think that it is better if you put it on a website, and not youtube .... easier to scroll on a web browser than to go forwards and backwards in a video
@xoxoXoieoxox
@xoxoXoieoxox 12 жыл бұрын
welcom back its nice to see u making videos agin i am very interested in building a gasifier like the one i have seen in ur past videos i have a few ??s but its kinda late and i cant think well now so ill keep in touch =3-
@jefftarango2278
@jefftarango2278 3 жыл бұрын
Hi ... where are you located ?, do you sell the gasifier ?
@coolobuttface
@coolobuttface 8 жыл бұрын
it would really help if you can find someone that knows English and knows the correct spelling of what the hell you are trying to describe
@dineosilverio7923
@dineosilverio7923 4 жыл бұрын
Top of Galaxy Nexus
@ilililhy1
@ilililhy1 9 жыл бұрын
I am interested in wood gasifiers but i`m thinking a Coal Burning Gasifier might just be better ,all the way around.
@xoxoXoieoxox
@xoxoXoieoxox 11 жыл бұрын
like u sed after a long pause the second part of my project will comece i baut a VW beetle i beleve i put a 1200 in it now its time for a gasser lol =3-
@Desiludido79
@Desiludido79 2 жыл бұрын
sell me the project
@tangoinasia
@tangoinasia 9 жыл бұрын
Looks really cool. Can you shear the solidworks drawings? Thanks
@corywarneke668
@corywarneke668 8 жыл бұрын
Nice work!
@nelsondisalvatore9812
@nelsondisalvatore9812 10 жыл бұрын
I knew i was rich when I bough a use dolphin.... HAHAHAHAHA
@mybasics7194
@mybasics7194 2 жыл бұрын
Good job
@psibyrion
@psibyrion 11 жыл бұрын
WHY DON'T PEOPLE HAVE A FUCKING CLUE BEFORE THEY COMMENT?
@Standupstew
@Standupstew 11 жыл бұрын
And I'm sick of paying usurious power bills!!!
@hjelkrem79
@hjelkrem79 10 жыл бұрын
Nice. What kind of ticks did you use when tick-welding??
@sheltrown1117
@sheltrown1117 11 жыл бұрын
Nice work, looks good.
@saltechindia
@saltechindia 11 жыл бұрын
system can use in the fishing boats?
@KingTesticus
@KingTesticus 9 жыл бұрын
who's Hej Guy?
@ismael342
@ismael342 10 жыл бұрын
very good
@NuttyforNissan
@NuttyforNissan 11 жыл бұрын
Well done, I see your metalworking skills improved over the period of development, that's a complement not a dig. :)
WOOD POWER! Off Grid Electricity from Wood - Part 1
20:45
Gridlessness
Рет қаралды 1,2 МЛН
Electric Flying Bird with Hanging Wire Automatic for Ceiling Parrot
00:15
Running With Bigger And Bigger Lunchlys
00:18
MrBeast
Рет қаралды 115 МЛН
Wood Gas (See Thru Wood Gas Generator)
10:36
Warped
Рет қаралды 182 М.
Simple Fire 2015
16:33
Gary Gilmore
Рет қаралды 11 М.
Step by Step: Build an "tar-free" Gasifier (Downdraft) I
9:59
Scoobyist
Рет қаралды 1 МЛН
Wood Gasifier Build
6:07
ESTVENTOR
Рет қаралды 9 М.
FEMA type gasifier for off grid power and fuel build, Part 1, overview
9:11
The Driveway Engineer
Рет қаралды 22 М.
WOOD POWERED LAWN MOWER
12:23
colinfurze
Рет қаралды 4,5 МЛН
My wood gasifier! It works! DIY. How to build it. Part 1
17:27
Todd Reuschel
Рет қаралды 22 М.
Electric Flying Bird with Hanging Wire Automatic for Ceiling Parrot
00:15