Stetsom NEW 2021 Digital Audio Processor Test and Review!

[@newstart490]

iv been using exactly same for 16 months around. no problems. control every aspect of music from each speaker. hear things u never new was on a track. ✌

[@georgesrisomsak9650]

I've been running these DSP's for a while. There's also the Prv versions, same exact thing. You're going to love it, very customizable and you can dial it EXACTLY how you want it. So much to say about it really. I'm very happy with mine, I run this exact model. You can tweak the mids and highs however you like, making a full active front stage super easy. Be careful with tweeter crossover points. I'll just say cross them high if you want power handling. I've found out the hard way. So configurable and easy to use really. You can even set a limiter, with fine adjustment, so if you go ham fisting the volume knob when your demoing hard, you don't blow shit up. 😂

[@izaakavenaluckyss1933]

That thing is amazing it's like a real studio sound

[@Factory43R]

This seems to be good for OEM head units that are only running a Kicker Key loc or lc2i.

[@solicitutoob]

Really cool DSP. I wish there was a USB connection. So you could go through the settings much faster.

[@iang7523]

When you figure it all out can you do a full go through with the dsp if u can.

[@bassismygod9859]

These dsp is better for mids and high . The clarion crossover better for the bass

[@travismanuel3739]

Awesome thanks for the info. Been thinking about getting one. 👍

[@JacobViral]

Your welcome Travis

[@nickhaley1212]

Ya I just bought 1 a few weeks ago I have been meaning to install it and start figuring it out, hopefully this weekend so much to do but so little time to get it done, they are badass and I cant wait to use it.

[@DTW-bx2vy]

A DSP is a must to force a fully flat signal that everyone is looking for. Boosting the signal will only increase distortion & no one wants to increase distortion & lower there maximum output.

[@1ohmwrecker]

I've got the PRV one. It's identical to that one. But it's changed my sound greatly! Especially cuz I gotta use a Lc2i. I love it!

[@col98]

I’m also using an lc2i with my setup and been thinking about a dsp. Did it make a big difference with your subwoofer quality and performance?

[@1ohmwrecker]

@@col98 insane difference! Helped the drop off created by the Lc2i. Bass is deeper and cleaner! I think I got a video on my KZbin bout it? But it made a crazy difference!

[@col98]

@@1ohmwrecker thanks man! I’m definitely gonna get one, I checked out your channel car is clean asf and subs pound. Subbed 🔥

[@1ohmwrecker]

@@col98 best $100 you can spend man. Takes a bit of getting used to setting up. But check back with me after you do!👍

[@col98]

@@1ohmwrecker will do man! I may not install it till after winter though 😆 we’ll see what happens!

[@tridelv702]

I have debating between the stetsom, prv, taramps and expert electronics dsp's they are all super cheap dsp's but I think I might go with the extremes version it seems to have the most features and the only one that has Bluetooth connection and an app to use. I think it's actually cheaper than the rest at like $99

[@shadricksimms]

I have it but need to learn how to use it

[@esmokebaby]

Wouldnt this be a 8 channel as it has 8 indapendent channels left and right in a set of 4

[@jacoblittle3209]

I just got one of these and I love it! It is so useful and easy to use. And the features are numerous. If you are looking into getting an active xover spend the extra $50 and get this product. It will crossover all of your line signals, you can use it as an EQ

[@evan.norwalkcalifornia562]

Were u purchase it from

[@freshbutplain1144]

I don’t see it for $50 I see over $100

[@jacoblittle3209]

@@freshbutplain1144 I was saying an extra $50 over the price of an active crossover. 8 think I bought mine for around $150-170

[@freshbutplain1144]

@@jacoblittle3209 ahh I see. I misunderstood.

[@Widowmaker2828]

Another good thing about this DSP is the output voltage is less than 2 volts so it is safe to use with all amps including Brazilian amplifiers like a Taramps.

[@brianbelcon8723]

The output voltage is 5v bro

[@BurningDownUrHouse]

@@brianbelcon8723 Who tf would want less than 2v output? lol

[@bkordel]

Should've got the stetsom 2848. Almost the same price and it's the upgraded model. More outputs

[@TheCitywide64]

Thanks no one ever really did one

[@JacobViral]

👍 thanks for watching

[@rudychavez5603]

I have one of this in my truck. Still learning how ro use it. But what i dont like i get engine noise i dont get it with my crossover. Im using same wiring as the crossover. But i like the DSP.

[@jvsyoutube3298]

Just got a dsp from deaf bonce, gonna use it to crossower mids, and hights, and the L7's in the trunk. They say that a active crossover is more effective then a passive one, and i think they are true. And ofcourse be able to exactly correct the speakers working hz, according to their data, not a generic passive crossover curve, thats gonna be nice :)

[@michaelbaldwin8869]

I might get one I heard that they were good

[@grady.stu.8300]

I don't understand how you did the RCA's. I'm new to using 4 channel amps. Just installed mine. So you used only the 4 channel amps RCA's? So the front in the input and the rear coming out of channel 1 on the DSP?

[@JacobViral]

Correct

[@steffonhaywood3717]

Great DSP for the cost I've used an installed many

[@bhagirathbr8398]

DSP full connection kaise karenge

[@dantejimenez2679]

what do you think about the STETSOM STX 2436 Bluetooth DSP?

[@lgr9314]

Can I run a 2 channel LOC to a 4 channel Dsp

[@tigeryorkie07]

You should be able to. Just use a "Y" cable RCA splitter.

[@ponylifestyle5995]

Big benefit?

[@chefleon2967]

So is this a was to hook up 2 or multiple 4 channel amps?

[@douglasmitchell2413]

When this DSP is off , do the sequence 1,2, and 3 lights stays on?

[@JacobViral]

Device should be off when off so it doesn’t kill battery overnight

[@douglasmitchell2413]

@@JacobViral it’s goes off just them sequence 1,2, and 3 light stays on but the device goes off

[@kaulitz660]

Um dos melhores do Brasil 👏🏻👏🏻🇧🇷✌🏻

[@ADRIANOELTIEFÃO]

Sim eu uso é excelente

[@CompactAudiodesigns]

I dont like this stetsom 4 channel i rather the prv 8 channel because the stetsom u can not separate each output to get left and right

[@Rah-know]

What chew mean? It’s mono channel on the input??

[@Phatwhipz]

I need help with mine bad located in Pooler too

[@tigeryorkie07]

I have the Stetsom STX 2436 Bluetooth Digital Audio Processor Android Enabled Equalizer, it's the bluetooth version. I might be able to help you.

[@Phatwhipz]

@@tigeryorkie07 I just need help setting the tuning and have no clue about input/ output parameters

[@dantejimenez2679]

@@tigeryorkie07 I have this 4 channel but i was looking into the bluetooth since it's easier looking through the settings on a phone than. is the bluetooth version missing any features besides the sequencer?

[@Caluy]

Hi, Can you please help. I have a wining high pitch tone in all of my speakers from installing the dsp. I have good ground and i have moved the rca cabels so they dont touch any power cabels and this is my second dsp, I had one before with the same problem so i changed to stetsom insted because I thought it would help with the problem. But is there some setting in the dsp or is it alternator sound? Like it doest sound like alternator wining because its the same tone it doesnt go up and down like alternator wining..... Please help (:

[@JacobViral]

Tried new rca cables? Tried adding additional new grounds? Bad head unit?

[@Caluy]

@@JacobViral I have 2 0 gauge cabels to ground in the seat belt thingie and good rcas and original sterio but i found the problem it was that the gain was to high for the dsp so i just lowered it and set it to the dsp so it works great now (:

[@delroypatrice1011]

​@@Caluy which gain was too high(the head unit)

[@Caluy]

@@delroypatrice1011 on the amps

[@GMTPF800]

Got one still in the box from audiopipe

[@HardKnocks160s]

Selling ?

[@GMTPF800]

@@HardKnocks160s my son claimed it..

[@dekeviusedwards7766]

Could you tune your subs using this also

[@JacobViral]

Yes a lot use these for subs also

[@dekeviusedwards7766]

Thanks

[@dekeviusedwards7766]

One more question what’s the first set of rca do I run from my cd player to the input on the stetsom ??? I’m running 3000 watt smart 3 and a ct sounds 1000 watt 4 channel just to let you know my setup…

[@bhagirathbr8398]

DSP ka ful demo please

[@elliottf1306]

Audio control!!!!

[@arnicus208]

“I’m gonna get this installed...on a folding table outside my vehicle.” I don’t think you know what ‘install’ means.

[@JacobViral]

Whether it’s installed on a box, amp rack, back of trunk, table, etc all the same?

[@franklinwalker9606]

Is a loot good Brazilian processors...JFA for exemple have a Nice interface tons of configurations and Full bluetooth ajusts on smartphone ✌️✌️

[@scrapenbass493]

7:52 calm down bro...your brains going faster than your mouth

[@gioarteaga3984]

Jacob ill give 50$ for that stetom stx2448

[@moneycat3789]

Spade terminals no,no , no I wouldn't use that

[@evan.norwalkcalifornia562]

Y

[@moneycat3789]

@BEATING NCP93 I would recommend the terminals on new amplifiers

[@holeshotinspectionllc2412]

@@moneycat3789 There Tiffany Style RCA’s, not the one’s on this DSP, the RCA’s your referring too🤙

[@moneycat3789]

No way bad ass

[@alphaomega8373]

Sorry nothing but issues from Stetsom products for me.

[@JacobViral]

What happened?

[@alphaomega8373]

@@JacobViral Make sure you secure the rcas so that there not ever vibrational movement. For me it was issue with the inputs. Bad solder job... funny I had the exact same issues with both the DS18 X-over and EQ. I know im the common denominator but, this is over a course of six years and different builds.