Ciro 3D LED Lighted License Plate Frame Install

Get yours here - shrsl.com/3iqb1 In this video, I will show you how to install the Ciro Lighted License Plate frame. It's completely plug-and-play and comes in black or chrome with your choice of smoked or red lenses. These fit 2014 + Street Glide and Street Glide Special, 15+ Road Glide and Road Glide Special, and the 17+ Road King Specials.
As an Amazon Associate, I earn a very small commission from qualifying purchases. It does not cost you more to buy through the link but it does help us! Thank you for your support and for helping our channel grow!
🔵My Gear - Sony Handycam - amzn.to/3mhAIyv
GO Pro Hero 7 black x 2 - amzn.to/3p9fxQK
Go Pro Helmet Mic - amzn.to/3e6vRM8
Packtalk Bold Duo Helmet Coms - amzn.to/3e4z5jd
Bell SRT Helmets - amzn.to/3GWdpBZ
Samson Go Mic - amzn.to/3Fale6Q
Video Lights - amzn.to/3shXUAk
Tripod - amzn.to/3uyvTnO
Mini Tripod - amzn.to/3snWtjR
Go Pro Gimbal - amzn.to/3yHw69H
Go Pro Mic - amzn.to/33MzPYp
Go Pro Mic Adapter - amzn.to/3p69c8N
Go Pro - Filters - amzn.to/33HS7dc
GoPro - Case - amzn.to/3p8CKCB
GoPro Stabilizer Gimbal - amzn.to/3tLk6Do
Camera Light - amzn.to/3NuVmao
Camera Mic - amzn.to/3IRQ7Oe
#sikbaggers
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music Licensed Through www.epidemicso...
🚩The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the video content. Steven Housden, SIK Baggers does not warrant the performance, effectiveness, or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of the Company. The mere appearance of Video Content on the Site does not constitute an endorsement by the Company or its affiliates of such Video Content.
Steven Housden/ SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.

[@patsamples6452]

Great information. Lights a must. Thanks Steve

[@sikbaggers]

Thank you Pat!

[@scottschiller1153]

Great presentation Steve 👏 👌

[@sikbaggers]

Thank you Scott!

[@justanotherviewer52]

Thanks Steve. Another great Ciro product.

[@sikbaggers]

Thank you Ded! Pretty slick!

[@superduty131]

Thanks for this, BUMMER on the no go on the ST's. I will keep looking.

[@sikbaggers]

Yeah the wiring is different on the st's...a few of the subtle differences

[@jimmischler4856]

Great video Steve very informative you do a great job I do appreciate all you do man………..

[@sikbaggers]

Thank you jim!!

[@ciro3d_goldstrike3d]

Awesome video Steve, always super informative and helpful!

[@sikbaggers]

Thank you!!!!!!!!!

[@FHOHNIC]

Excellent Video I still would not try it but thanks for the encouragement.

[@sikbaggers]

Thank you for checking it out!

[@cathyfields]

Thank you for another great install video. I really like what you do for the Motorcycle lifestyle

[@sikbaggers]

Than you for the kind words Cathy...much appreciated. Glad they are helping! Be safe.

[@thomascarpenter7415]

Nice demo man !

[@sikbaggers]

Thank you thomas!

[@talkingrock7011]

Good looking setup there’s so much competition with aftermarket lighting companies have to be very creative , thanks did you skin your knuckles with the installation ?

[@sikbaggers]

Well I did skin them a few times when I first started installing any curved plates...but learned how to et my hand just right to avoid that lo

[@MrCRM2011]

That’s nice I think I’ll order that for my ‘21 RGS

[@sikbaggers]

Its sharp! Thanks for checking it out

[@jamesgoldsby3621]

My forearms simply don’t fit between the tire and fender on my 22 RGS to get to the 2 bolts that hold the taillight assy on. I might get them removed but they aren’t going to go back on. Could I disconnect the shocks to allow the wheel to droop further, or would it be limited by something else?

[@darrenlingerfelt5879]

👍

[@sikbaggers]

Thank you darren!

[@Gipsydanger03]

have broken 2 of these now over the course of a year. The tabs that hold the holder to the light bar keep breaking off because of the vibration from the bike there made out of plastic not metal. Ill be going back to a stock metal one. Wish they made them in metal if they ever do ill get another.

[@sikbaggers]

man sorry to hear that you had that issue

[@james6275]

Hi Steve, In your opinion which do you think are a very good rear shocks, I know there are factors involved but with so many on the market it just gets a bit kooky in which shocks I want to get. I have a 2019 SGS. your opinion matters Thank you sir.

[@sikbaggers]

Hey James..yeah I group shocks in with the same category as slips ons, seats and windshields...its really a personal opinion on feeling and sound with this group of upgrades. I will say if you plan on running regular shocks and not air, I would suggest looking at Price wise in this order, progressive, legend then ohlins. They are all good shocks, just check prices according to your budget. If youre doing air...Dirty Air all the way man...never an issue with these guys

[@45faith54]

I have a problem and I hope you have a solution for me. I have a 2018 Fatboy. I want to add 6.5 speakers to it preferably on lowers. I do not want saddlebags. Anything you recommend?

[@sikbaggers]

Youll have to install a full size crash bar engine guard to add lowers...ready available on ebay and amazon

[@Kingfieldy1978]

Love the shirt my brother. Never forget!

[@sikbaggers]

Thank you sir..love working with Mission 22...some really great people.

[@Kingfieldy1978]

@@sikbaggers yes they are! Me and my CVMA brothers support all veterans in need. Let me know if you ever have any in need, just right here in Indiana.

[@treywigger4933]

Will this bolt and work with the Latitude tail light instead of using the factory tri bar light?

[@sikbaggers]

yes it will work with the latitude light

[@pengyG10]

does it work on a 2021 SG CVO?

[@scottwoldt7588]

I want to invest in a jump pack to jump battery if needed when on a trip. Any suggestions? 15 street glide cvo.

[@sikbaggers]

I use NOCO ....they have been around awhile and have 6 of these ..in cars, trucks, bikes and my Family Safe Storm Shelter...no issues out of any of them. amzn.to/3LwwtZr

[@scottwoldt7588]

Thanks

[@billyb4169]

Got the Ciro lighted license plate holder, bag fillers, and phone charger. Happy with all until the charger shit the bed.

[@sikbaggers]

oh no..did you contact them about the charger? they are pretty cool ab out making things right,

[@ciro3d_goldstrike3d]

Hi Billyb, please email [e-mail] and they will help you out!

[@marcmo7138]

What front fender is on that bike Steve?

[@sikbaggers]

I just put that fender on while this bike was in here...we did the tank covers, tank dash, wrap fender, all new audio, upgraded ciro fang turn signals and this plate light...all of the abs painted parts are from Advanblack. www.advanblack.com/color-matched-19-reveal-wrapper-hugger-front-fender-for-09-22-harley-touring.html

[@marcmo7138]

@@sikbaggers Thanks Steve

[@lloydledet5570]

Damn I didn't mind my plate bracket till now. Ummm honey I need to spend 200 bucks real quick.

[@sikbaggers]

haha yes sir...loved the curved look!

[@lloydledet5570]

Well I did it.... man this couch is more comfortable than I remember.

[@truckingshanagins8525]

Anyone know what that seat is?

[@125saito]

It looks like an Advanblack seat. Not 100% sure.

[@sikbaggers]

www.advanblack.com/advanblack-custom-stitching-liner-for-advanblack-oem-razor-size-tour-pack-1.html

[@markinlubbock]

First?

[@sikbaggers]

yep! Thanks for checking it out Mark!