very few people know, the secret of the welder cuts round pipe 90 degrees in three directions

  Рет қаралды 21,931,134

Stick welder

Stick welder

Күн бұрын

Пікірлер: 2 700
@lowellmccormick6991
@lowellmccormick6991 Жыл бұрын
When we build pipe handrails, we miter the horizontal corners and make the cut shown for the vertical posts at the corners. I tend to either draw the templates with AutoCAD or use an old piece of DOS software to draw the templates and import the result into AutoCAD and print them out for the shop. I love seeing this layout work done manually, without computers. It's very informative. Great job Stick.
@vancouverpoy
@vancouverpoy Жыл бұрын
yea a miter saw was the first thing I thought about cuz it locks on 45 degrees. I fabricated and welded 6 fire extinguisher stands. I took on a job welding boats after having jobs 5 different jobs last year. Learning Marine fabrication welding has made me smarter!
@tonyHern865
@tonyHern865 Жыл бұрын
Fuck computers (me watching the video on a computer)
@michaelhubble6252
@michaelhubble6252 Жыл бұрын
What is the dos software can it be found somewhere?
@lowellmccormick6991
@lowellmccormick6991 Жыл бұрын
@@michaelhubble6252 I believe it is called flatpipe.exe and it's written in QBASIC. It's on an old 486-33 machine that's in the garage. I haven't used it since I found a routine called pipe.lsp. that runs in AutoCAD. I have that routine on my current workstation but haven't used it in a while. I've used some online template makers in the past. Both of the fab shops I draw for use coping/notching machines for smaller pipe. Templates are only needed for large pipe sizes.
@michaelhubble6252
@michaelhubble6252 Жыл бұрын
@lowell mccormick thanks. I did a little search myself and found ... Dan Hopper's TUBEFIT Program Which sounds like it does a similar thing. Haven't tried it yet
@Wh1terider
@Wh1terider 7 ай бұрын
This is why you pay a tradesman. Not for the time involved, but for his knowledge and skill. Bravo sir.
@m.haslam8495
@m.haslam8495 6 ай бұрын
Absolutely correct. That's what people pay me for. It's the decades of experience and doing the job properly first time.
@geraldwelch3487
@geraldwelch3487 Жыл бұрын
I'm a carpenter, with an interest in welding. I'm super grateful for these sorts of instruction videos. You're giving me the confidence to learn something I've always been interested in. Keep up the cool instructions!
@irondiver292
@irondiver292 Жыл бұрын
Going to start ratting the welding too huh?
@francis5944
@francis5944 Жыл бұрын
Nice. If your a carpenter, you shouldn't have no issues on learning how to weld
@elected0nes741
@elected0nes741 Жыл бұрын
In a basic sense, a welder is just a carpenter who builds things with metal instead of wood. If you're serious about becoming a welder, and you haven't done so already, I'd suggest you look for a tech school in your area that teaches stick, MIG, and TIG welding. I'd learn them all, starting out with stick and then MIG. After learning how to weld, get your certification in both plate and pipe welding and start making the big bucks at a nice fab shop. Good thing for you that you already have fabrication experience as a carpenter, so you'll have little trouble fitting in at a nice fabrication shop if that's where you wanna work. I've been a welder for many years now, so I speak from experience. Good luck in what ever you decide to do! 👍👍
@daveparsons6956
@daveparsons6956 Жыл бұрын
Very cool. Let’s not ignore the skill with the angle grinder. You made that look a lot easier than I think it is in practice. Great work.
@billmoore1936
@billmoore1936 4 ай бұрын
@@daveparsons6956 is only practice Bill
@WarPigstheHun
@WarPigstheHun Жыл бұрын
I know how to do this because 2 years ago I was obsessed with creating the perfect Tri-cornercut with quarter radius 2020 aluminium extrusions. The manufacturer (Mitsumi) outright refused to do the cut because it was so complex and required alot of time and precision. I definitely wasted alot more extrusions than I needed to. But hey, at least I learned how to cut tricorner quarter radius perfectly! :D
@googlewolly
@googlewolly Жыл бұрын
Interesting. Also, just for your information, it's "a lot."
@Madsy9
@Madsy9 Жыл бұрын
10% of the time, it works every time
@larryclemens1850
@larryclemens1850 Жыл бұрын
​@@Madsy9 😜😂 Good line. I'm going to use it. Thanks
@chrisS19019
@chrisS19019 Жыл бұрын
Good evening! I tried googling what you mean by tri corner cut with quarter radius and I’m genuinely stuck. Is that for the end of a counter top? Or is that the joint of a wall and floor? Brand new “home” (duplex) owner im interested in learning new things.
@WarPigstheHun
@WarPigstheHun Жыл бұрын
@@chrisS19019 it's actually for a customized PC "case" that allows me to carry a full midatx or a microatx desktop in a plane carry on bag. There's virtually no case on the market that can do this. I wish I could show you a picture of it, it's pretty cool!
@СавиновМаксим-р1ф
@СавиновМаксим-р1ф Жыл бұрын
Как же просто то:).Именно о таком и говорят,:"Всё гениальное просто".Спасибо за подробную инструкцию.Обязательно буду использовать этот метод.
@davidalanjonesridge9874
@davidalanjonesridge9874 Жыл бұрын
Google Translator: Savinov Maxim Savinov Maxim 1 day ago How simple it is :). This is exactly what they say: "Everything ingenious is simple." Thanks for the detailed instructions. I will definitely use this method.
@6y4men
@6y4men 7 ай бұрын
Нифига себе просто)))
@abolishthesun4215
@abolishthesun4215 Жыл бұрын
I have never seen someone put so much effort into not using a pipe wrap in my life. I'm actually impressed by it.
@KenFullman
@KenFullman 7 ай бұрын
And don't forget to use gloves when you're handling paper. That stuff is dangerous.
@Bush-Master4333
@Bush-Master4333 7 ай бұрын
The person who developed had to how to make the joint the old school basic fundamental as shown in video. If for whatever reason the pipe wrap is lost stolen or damaged this guy can save the day especially on fast paced jobs.
@paddywiggle
@paddywiggle 7 ай бұрын
Once he has the template, it’s not very hard to replicate
@HarmonRAB-hp4nk
@HarmonRAB-hp4nk 7 ай бұрын
you'd be more impressed with the fact every pipe welder knows this way... proper faster way is just drill a hole in the pipe.
@WrappedInPlasticine
@WrappedInPlasticine 7 ай бұрын
You got a nice, hearty chortle out of me with this comment😂😂😂
@rogerroth9536
@rogerroth9536 Жыл бұрын
I'm a retired music teacher. When I see something like this I naturally ask myself how this was first learned. Who first figured all this out, drawing patterns then applying them to the pipe? I can't even fathom the compound miter cuts. I am deeply, deeply impressed with your skill. Bravo!!
@richards1342
@richards1342 Жыл бұрын
I like to imagine Pythagoras going to blacksmiths and blowing their minds 🤯
@CosmicSeeker69
@CosmicSeeker69 Жыл бұрын
left brain (logic) Right brain (creativity) It's no wonder it doesn't resonate with you of all ppl
@rogerroth9536
@rogerroth9536 Жыл бұрын
Playing in a professional orchestra requires unbelievable mathematical, split-second precision on the part of every one of the 100 players, in their individual execution and together, in ensemble. I don't know which side of the brain that involves but it's a learned skill and is a function of time. In a split second, the execution is gone forever, and there's no chance to fix errors. @@CosmicSeeker69
@davidmurphy9151
@davidmurphy9151 Жыл бұрын
Like equal temperment - the enlightenment was good no matter what the youtube commenters think.
@ToonMics
@ToonMics 7 ай бұрын
u teach Music that is already awesome!
@vince2997
@vince2997 Жыл бұрын
Man, welding is such a interesting job skill. When I was active duty air force, the fabricators/welders were your best friend in maintenance. These guys could make a part you needed for generators instead of us having to wait 4-5 weeks for parts on back order. Find something your good at and master it 😊
@HAMlLTON
@HAMlLTON Жыл бұрын
3E3
@Ziffel3
@Ziffel3 Жыл бұрын
Glad you said generators, and not planes… haha
@vince2997
@vince2997 Жыл бұрын
@@Ziffel3 lol never. Sounds like a DSV haha
@ToonMics
@ToonMics 7 ай бұрын
@@Ziffel3 have to read it again haha
@Chriscam2you
@Chriscam2you 7 ай бұрын
No matter which way you look at this, love it, hate it, criticize or applaud it, claim all the other better ways of doing it, … you have to admit it is one impressive bit of work. I enjoyed watching the process.
@水田立二
@水田立二 4 ай бұрын
0:29 0:29
@SuperHornet1981
@SuperHornet1981 Жыл бұрын
It is quite enjoyable to watch someone work who really knows what they’re doing.
@rickwilliams967
@rickwilliams967 7 ай бұрын
😂😂😂
@TheMikemcc55
@TheMikemcc55 Жыл бұрын
I work in concrete repair and foundation waterproofing. The fact that you clearly take the time to read all the comments and time pride in your work shows your attention to detail and dedication to your craft. Liked, subscribed, good on you bud. Keep up the hard work, we see it!
@deereed82
@deereed82 Жыл бұрын
I am a wood machinist and supervisor of a hardwood sawmill. I second your comment. Attention to detail and as you also said, there's a lot of pride in his work too
@giorgiomureddu4026
@giorgiomureddu4026 Жыл бұрын
@Сева-к3п
@Сева-к3п Жыл бұрын
There is the Plate'n'Sheet Proffessional 4 program, in which you can print a template for any pipe diameter, at any angle of the junction of two or three parts of the pipe, and after printing at a scale of 1:1, just like the author in the video, you can wrap the pipe and stick the template with tape, circle the curved edge with a marker, cut pipes along this line and join. The match with the desired angle will be 100%.
@lunarwolf5555
@lunarwolf5555 Жыл бұрын
People are allowed to use the help of a computer, but they must be able to do their job the old-fashioned way. Just in case.😏
@chrisstaten3732
@chrisstaten3732 Жыл бұрын
Piping and commercial piping. None of my coworkers bring laptops and printers to work with them either. So…… not sure what field you sir have been in but glad that you’ve had it that good.
@chrisstaten3732
@chrisstaten3732 Жыл бұрын
Some of my reply was cut off
@chrisstaten3732
@chrisstaten3732 Жыл бұрын
I have 17 years experience with marine, industrial and commercial piping
@chrisstaten3732
@chrisstaten3732 Жыл бұрын
@@engmecfleck refineries, ethan cracker plants, plastic plants, power plants, fertilizer plants, There are computers and printers on site but only for use of supervisors and upper management. To be fair though it’s not a regular thing to need said templates very often.
@mikalrage7316
@mikalrage7316 Жыл бұрын
This is such a huge set of lessons in life. 1: Math + Art + Experience + Skill Mastery = Awesome results in any venture you choose in life. 2: Stay in school, kids! 3: If you personally don’t yet have one or more of those ingredients for success, it’s OK to form teams! Connect and team up with those who have the success ingredients you need to complete the formula. You bring your pieces of the equation and they bring theirs… everyone wins. 4: Everyone must win. One of my best business mentors hammered into me the mantra “Win-win or no deal.” Always work for the mutual success of your team and the client. This video and channel might just be one of the team “members” you need on your own journey.
@gaetanramos7903
@gaetanramos7903 Жыл бұрын
Hi! THis is very impressive. I'm a high school math teacher and this is such a nicely done trigonometry application that I think about giving it to my students. I love when raw industry meets raw math!
@KD_cycling
@KD_cycling Жыл бұрын
Great idea. As a tradesman that struggled with more advanced math in highschool I wish my teachers used more real world examples/problems. I think it would have held my attention better. Otherwise it's just a sea of letters and numbers swirling around in my brain
@SouthShorePlasticSurgery
@SouthShorePlasticSurgery Жыл бұрын
This is Descriptive Geometry. This is basic for Master Machinists. Descriptive Geometry forms one of the cornerstones of turning flat-plane 2D sheet metal into 3D shapes. This is the outcome of outsourcing everything out of this country - #1 there are no more Master Machinists left. #2 no one knows the fundamentals such as Descriptive Geometry.
@goraton52
@goraton52 Жыл бұрын
Прекрасный урок начертательной геометрии! Браво, мастер!!!
@soyitiel
@soyitiel Жыл бұрын
I've never used any of those tools or done any related work, and who knows if I ever will, but this was amazing and very educational to watch, makes want the opportunity to use this knowledge to come soon
@jaredpatterson1701
@jaredpatterson1701 Жыл бұрын
Well said
@sickwilly1171
@sickwilly1171 Жыл бұрын
Google sheetmetal pattern layout if this kind of stuff interests you. Those old timers that had to scratch out all of there layout without cad were badass.
@user-py8gn6mz7j
@user-py8gn6mz7j Жыл бұрын
Сууупппееер. Молодец, столько лет занимаюсь кузовными и сварочными делами, но всё ровно даже посмотрев ролик не смог запомнить, как сделать этот шаблон. А результат просто на 5
@sakesaurus
@sakesaurus Жыл бұрын
наверное там нужно чето самому посчитать чтоб такой шаблон создать, такие штуки на глаза не запоминаются
@yatutpoteryalsya
@yatutpoteryalsya Жыл бұрын
kzbin.info/www/bejne/mYinloCmjKqHZ5I
@АлександрЛисицын-р8б
@АлександрЛисицын-р8б Жыл бұрын
@@sakesaurus Да нет. Будьте чутка повнимательней. Единственный размер который вам нужен это диаметр трубы.
@sakesaurus
@sakesaurus Жыл бұрын
@@АлександрЛисицын-р8б но... все эти построения которые он делал на бумаге - это как бы тоже расчет. Только в геометрическом виде
@АлександрЛисицын-р8б
@АлександрЛисицын-р8б Жыл бұрын
@@sakesaurus Ну геометрия понятно присутствует. Но для повтора данного шаблона хватит и просмотра видео.)
@rwelderby
@rwelderby Жыл бұрын
Nice to see how to make the template for this. I figured this cut out about 30 years ago while doing a lot 6" pipe rail. I was fortunate enough to have medium size band saw and I would cut the end at a 45 then rotate the pipe without moving it in or out and cut another 45 degree miter. Thank you for your video!
@thisguy6197
@thisguy6197 Жыл бұрын
Once I'm done perfecting my trade in HVAC I tend to get into welding and will most definitely be watching your videos countless times. Thanks for sharing your knowledge good sir
@StephenZ827
@StephenZ827 7 ай бұрын
well know this....a shipyard ( carriers ) they will pay you while you are in welding school. You actually learn how to really weld vs these folks. Don't tack as they do here, in a corner, you can't get the grinder in there if you need to reset the work. Plus welds need to be tapered each end allowing for your compete weld to feed into that tack or flow over it. Stuck in a corner like this one, hard to clean it and now weld over it. Use a square to insure you didn't pull the tube left or right....keep checking that as you work.
@ToonMics
@ToonMics 7 ай бұрын
@@StephenZ827 whats ur job?
@StephenZ827
@StephenZ827 7 ай бұрын
@@ToonMics kzbin.info/www/bejne/gYXRqqlmmqxkeac
@StephenZ827
@StephenZ827 7 ай бұрын
@@ToonMics .....I'm actually in this video...parking lot of all places.........11 seconds or so....they are setting the Island house. It was a Sunday, which is typical for what we call super. But you have a number of dignitaries come in for the lift. Give a speech or so...Capt.s will go to welding school for a bit, learn to pay a bead...( not perfect )....and make the first weld, attaching the Island to the ship. It's cut out later as it's not a quality weld etc...he's not certified and all that crap....Top left, you see a black truck pull in, another truck approach it. That was me, took wife down to see the lift, she had never seen a carrier. Security picked me up on the cameras. I didn't park correctly....so they knew and came over to investigate...they saw my sticker, stopped and chatted, made sure all was kosher...This was my last carrier...keel up, making me a plank owner...kzbin.info/www/bejne/gYXRqqlmmqxkeac
@StephenZ827
@StephenZ827 7 ай бұрын
@@ToonMics Sheet Metal...department....
@HarryLevinson
@HarryLevinson Жыл бұрын
I'm not a welder but that is very cool. I love seeing techniques like this.
@AthSamaras
@AthSamaras Жыл бұрын
Congratulations for teaching the correct technique to those who are interested..!! / Συγχαρητήρια που διδάσκεις την σωστή τεχνική σε όσους ενδιαφέρονται..!!
@BudgetInnovation1
@BudgetInnovation1 Жыл бұрын
Geometry meets fabrication - great tutorial thanks!!
@КамалСулейманов-ш3у
@КамалСулейманов-ш3у Жыл бұрын
Этот парень заслуживает уважение.Спасибо что делитесь своими знаниями.
@blogakiasbloger1726
@blogakiasbloger1726 Жыл бұрын
Congratulations to the Stick Welder on an impressive job! Your hard work and dedication to your craft are evident in the finished product. The seamless seams and precise cuts are a true testament to your skill and mastery of welding. Your attention to detail and commitment to quality make you a valuable asset in your field. Keep up the fantastic work, and know that your efforts are truly appreciated. Well done!
@holybob4048
@holybob4048 Жыл бұрын
lmao
@TomSaw_de
@TomSaw_de Жыл бұрын
🙏 Amen 😵‍💫
@randyhartwell974
@randyhartwell974 Жыл бұрын
Tac welding sure is difficult.
@sasquatchrosefarts
@sasquatchrosefarts Жыл бұрын
You don't put all the welds together. You weld the first two on a forty five. Than the third has two forty five degrees drill holes. And it overlaps the first two for strength. It's faster to cut,.and much much much much stronger.
@staninjapan07
@staninjapan07 Жыл бұрын
@@sasquatchrosefarts Hi. Any chance of a link to a sketch of that description? I want to 'see' what you mean. Thanks.
@billgeorge7804
@billgeorge7804 Жыл бұрын
This was extremely cleverly done! I remember fifty years ago as a student apprentice I was given the task of making permanent sleeve marking out jigs for just this type of job. Good days.
@Palmstreet-u7x
@Palmstreet-u7x Жыл бұрын
i was born in South Africa,,and am a qualified sheet and metalworker, worked 40 years in the gold mines, in short, was a boilermaker and pipe work is my forte,
@alfredfabulous3640
@alfredfabulous3640 Жыл бұрын
@@Palmstreet-u7x where do you work these days?
@djakon39
@djakon39 Жыл бұрын
@@Palmstreet-u7x I have been working with scrap metal for 60 years. He started as an apprentice miller in Leningrad, Hero of the USSR. Hello colleague from Russia 👋
@skeptik_realist
@skeptik_realist Жыл бұрын
Восхитительно! Отличная работа мастера!
@ХочбарАбдулбеков
@ХочбарАбдулбеков Жыл бұрын
Да, это по хлеще, чем Фауст Гетте....
@ХочбарАбдулбеков
@ХочбарАбдулбеков Жыл бұрын
@@Gadkiy-ya-79 по-любому результат хороший...
@WarPigstheHun
@WarPigstheHun Жыл бұрын
I understand you because Google translate!!!
@РождённыйвСССР-ю6л
@РождённыйвСССР-ю6л Жыл бұрын
Все четенько.
@veysher3756
@veysher3756 Жыл бұрын
@@WarPigstheHun it’s amazing how seamlessly we can communicate with people who speak other languages these days.
@donnawilliams3375
@donnawilliams3375 Жыл бұрын
I worker as a journeyman field construction boilermaker for 7 years. And then I worker in a weld and fabrication shop for the Department of Army for 35 years. I always used to say that I might not of known the trade. But I knew the tricks of the trade. But this one trick that I hadn't been able to do. I applaud the person that did this. It shows what a true craftsman.
@mediamannaman
@mediamannaman Ай бұрын
Very smart! I would have never thought of that. Also impressed by how well he cut those curves in the pipes. Looked like he was just using a grinder, cutting freehand. Very skillful!
@paulorben6830
@paulorben6830 Жыл бұрын
I had to do something like that for brass pipe store fixture. I mitered each end then sanded the radiuses with an sanding drum the same diameter as the pipe. Worked. Your presentation was awesome. Old school stuff is lost on people today. I filed this one away for later. Very cool.
@valeriusinteresniy7111
@valeriusinteresniy7111 Жыл бұрын
На начертательной геометрии на 1 курсе все это учили и многое другое, но разве все запомнишь. За такие ролики респект!
@СергейХващевский-ъ8г
@СергейХващевский-ъ8г Жыл бұрын
Вот и вспомни начерталку учитьс
@alexeyorlov9639
@alexeyorlov9639 Жыл бұрын
Я только ноги учительниц помню
@Viktor2205
@Viktor2205 Жыл бұрын
@@alexeyorlov9639 Так вы фетишист значит?!
@alexeyorlov9639
@alexeyorlov9639 Жыл бұрын
@@Viktor2205 конечно. А что ?
@cykHAcyk
@cykHAcyk Жыл бұрын
Всё верно 👍
@Grizzlox
@Grizzlox Жыл бұрын
And this is why geometry skills are applicable to the STEM field. That aside, I must say your angle grinder skills are excellent. The steady hand and clean cut shows you've done a lot of this.
@wilhelmbusching5876
@wilhelmbusching5876 10 ай бұрын
😊
@chicobicalho5621
@chicobicalho5621 7 ай бұрын
Of all the impressive skills shown, I bet what most people were blown away by here was the angle grinder virtuosity. Damn!
@alanpowell24
@alanpowell24 Жыл бұрын
VERY clever and surprisingly accurate!
@pauleohl
@pauleohl Жыл бұрын
What we did not see is how much trimming was done between the cuts and the fit up we did see. Think of the 3 views. The top view will be a circle whose diameter is smaller than the miter formed by the 2 horizontal pieces. What has been made is fine for welding up 3 mutually perpendicular pipes.
@Ivan-fm3mh
@Ivan-fm3mh Жыл бұрын
Превосходно.Благодарю за науку!Ваш подход к делу вызывает уважение.
@homayounshirazi9550
@homayounshirazi9550 Жыл бұрын
A very good approximation of how to mark curves on conic objects. I like your effort, not to mention your skill at using your cutting tool. The cutting part is something else altogether.
@charlescamen5225
@charlescamen5225 Жыл бұрын
Yes, indeed, technically not an exact process for marking out the intersection of solids, but it appears that it a a good approximation that is well within tolerance for the welding of the joint. A Very good and easy to replicate process that leaves it up to your cutting skills. Well worth trying.
@xenocide1307
@xenocide1307 Жыл бұрын
@@charlescamen5225 The fit up was actually kind of bad, and given the lack of any real edge prep, you'd struggle to get full penetration through the root.
@christianbarnay2499
@christianbarnay2499 Жыл бұрын
This is a special case (all tubes with the same diameter). The exact solution is that all intersections are straight planes. On each pair of tubes you just need to halve the angle between the tubes to get the angle at which you should cut each tube. Here 90° angles everywhere means 45° straight cuts on all tubes. It takes half the time to directly mark the cuts on the tubes than all that fiddling with paper. This method is actually useful when tubes have different diameter. But not here.
@ToonMics
@ToonMics 7 ай бұрын
@@christianbarnay2499 can u do better?
@christianbarnay2499
@christianbarnay2499 7 ай бұрын
@@ToonMics The comment you're replying to already explains it all. There's nothing to add.
@jasonparker3109
@jasonparker3109 Жыл бұрын
This is why they’re called “Craftsmen”. I worked for awhile in a maintenance shop in a glass plant that had been in operation for over 100 years. The shop was still organized by “crafts”. There was one guy who was the tin knocker. He was pushing 40 years service. He was grumpy and hardly smiled, if ever. He would be assigned jobs to fabricate complicated guards and chutes. This was when he would come alive. The work he produced was pure Art.
@jackflash5659
@jackflash5659 Ай бұрын
I am now one of the very few. I'm not a welder but I found this intriguing. Much respect to your trade gloved one.
@JoeyIndolos
@JoeyIndolos Жыл бұрын
Great technique for a home shop with just an angle grinder for cutting. But if you have access to a professional shop (or have a more advanced home shop) that has a band saw, the easier technique would be to make two 45° cuts at 90° offsets (i.e., the cuts are 45° to the length of the pipe, and after making the first cut, rotate the pipe 90° to make the second cut).
@1funkyflyguy
@1funkyflyguy Жыл бұрын
Your precision work is very admirable. Respect.
@craigbenson7016
@craigbenson7016 Жыл бұрын
Im not a welder or do anything with pipe, But this was a great video ! Thanks for Sharing and showing how to think out of the box !
@danb6838
@danb6838 Жыл бұрын
heh heh heh......you said "pipe"...
@brianholtzmusicsound
@brianholtzmusicsound Жыл бұрын
Im a composer by trade and I found the depiction of craft in this video to be exemplary of anyone who aspires to deliver superior work. Bravo!
@GUSTAVO-i3r5f
@GUSTAVO-i3r5f Ай бұрын
Genial !!! 👏👏👏👏 Gracias por compartir tus conocimiento mil geacias que Dios te bendiga saludos de buenos Aires Argentina 👍
@roberteriksson1629
@roberteriksson1629 Жыл бұрын
Nice!! Well done Sir! It would be nice if you showed how to align your template to the next corner so the sides will be parallel.
@DK.03
@DK.03 Жыл бұрын
Вот, что надо показывать на уроках черчения и геометрии в школе. Безумно интересные практические знания 👍🏻👍🏻👍🏻
@cykHAcyk
@cykHAcyk Жыл бұрын
Если только в старших классах,а так всё это в начертательной геометрии в техникумах и институтах преподают
@DK.03
@DK.03 Жыл бұрын
@@cykHAcyk , я к тому, что демонстрация подобных штук ещё в школе вызовет интерес у школьников и покажет наглядное применение тех знаний, которые преподаются в геометрии и тп.
@yusupbechurkaev4007
@yusupbechurkaev4007 Жыл бұрын
@@DK.03 да уж, лучше один раз показывать, чем сто раз рассказывать
@Khinogtv
@Khinogtv Жыл бұрын
White light on video still hurts my eyes 😢
@xatasyugan2917
@xatasyugan2917 Жыл бұрын
кто учиться в техникумах и институтах они вряд ли потом слесарями и сварщиками идут работать.
@tameezdevos8868
@tameezdevos8868 Жыл бұрын
Wow . Your Angle grinding skills are unbelievable
@Jasho-Beam
@Jasho-Beam Жыл бұрын
I used to be a pipe fitter welder and can really appreciate your next level skills.
@Stanley7746
@Stanley7746 Жыл бұрын
My father in law was a sheetmetal bench mechanic. He built my ducts, and they are nice.
@Stanley7746
@Stanley7746 Жыл бұрын
@Lessko Brandon As a painter I learned how to match paint in the latter part of my career. Never could do yellows. I got to dump my mistakes! My boss thought I could match my whole career...lol
@RyanDonovan-kx3rn
@RyanDonovan-kx3rn 7 ай бұрын
It never ceases to amaze me how much work this guy puts into making the simplest of jobs into the most complicated, useless waste of time. It's like he is trying to reinvent the wheel with everything he does...
@abraaopacheco375
@abraaopacheco375 Жыл бұрын
Parabéns pela demonstração e perfeição demonstrada com profissionalismo
@janetehovacker
@janetehovacker Жыл бұрын
Que tesouro este ensinamento !!! Vai me ajudar demais com as uniões em bambu !!!! Gratidão !!!
@davidalanjonesridge9874
@davidalanjonesridge9874 Жыл бұрын
Google Translator: Janet Hovacker 5 hours ago What a treasure this teaching!!! Will you help me out with the joints in bamboo !!!! Thank you!!!
@nikgghul
@nikgghul Жыл бұрын
Бамбук лучше сваривать третеми электродами))
@janetehovacker
@janetehovacker Жыл бұрын
@@nikgghul eu costumo parafusar as uniões de bambu gigante, e quanto mais perfeitas estiverem , melhor resultado. Não sei o que são os terceiros eletrodos
@davidalanjonesridge9874
@davidalanjonesridge9874 Жыл бұрын
@@nikgghul Google Translator: Bamboo is best welded with third electrodes)) Bamboo?
@ruso6293
@ruso6293 Жыл бұрын
@@janetehovacker É uma piada. Ele estava a brincar.
@Евгений-ч5н6ь
@Евгений-ч5н6ь Жыл бұрын
Просто изумительно, никогда не думал , что такое возможно сделать. Раза три уже смотрю, но чтобы взяться за эту работу, не отважусь, ничего не понятно. Когда смотришь всё понятно, а самому начать делать, всё в сознании клинится, впадаешь в ступор и чешешь репу. Молодец мастер, жму крепко руку , ты настоящий спец в этом ювелирном деле.
@mashkin7983
@mashkin7983 Жыл бұрын
Попробуй подойти к делу через день , через неделю. Это нормально просто мозг загружен посторонней информацией.
@Victor-ko4
@Victor-ko4 Жыл бұрын
Есть множество программ "Как выполнить развертку". Либо напечатать, либо от руки...Было бы желание и только) ...НО, судя по всему его попросту нет! =)
@Victor-ko4
@Victor-ko4 Жыл бұрын
@@mashkin7983 С таким подходом к "делу", лучше вообще не подходить))
@Vlada_Taran
@Vlada_Taran Жыл бұрын
Во всём нужна практика. Когда начнёте делать, мозг сам подскажет что к чему.
@PerzyYT
@PerzyYT Жыл бұрын
Love how 90% of the video was him doing origami
@ne7595
@ne7595 6 ай бұрын
😂
@Na-if5ze
@Na-if5ze 3 ай бұрын
Believe it or not, the majority of a lot of jobs is prep-work. Painting, carpentry (lay-out), welding, etc.
@СергейМорозов-н4н
@СергейМорозов-н4н Жыл бұрын
Всю жизнь работаю с металлом и, оказывается, есть ещё чему поучиться у других. Очень профессионально и аккуратно, респект.
@PescadoresdoInterior
@PescadoresdoInterior Жыл бұрын
Vish, aí deu aulas em.. eu ia quebrar bastante a cabeça pra chega nesse resultado. Meus parabéns. Ganhou mais um inscrito guerreiro
@davidalanjonesridge9874
@davidalanjonesridge9874 Жыл бұрын
Google Translator: Inland fishermen Inland fishermen 1 day ago (edited) Vish, there in the classrooms... I was going to break my head a lot for this result. My congratulations. Ganhou mais um inscribed warrior
@andrewmagro7703
@andrewmagro7703 Жыл бұрын
Absolutely Wunderbar - Excellence great to see someone teach the tricks what some try so hard to suppress hats off to you friend 🙂
@freddyalbertomartinez
@freddyalbertomartinez Ай бұрын
Como decía mi abuelo, el que sabe, sabe! ...me gusta ver este tipo de videos porque son lecciones de vida..aunque yo no trabaje en herrería, pero me gusta ver la agilidad y la manera tan rápida de buscar los mejores ángulos y cortes para soldar los perfiles redondos y cuadrados...buen trabajo broder, te felicito...
@WelderPlus
@WelderPlus Күн бұрын
Thanks for sharing this great video, creative content and brings a lot of value to viewers.
@Лол-о4э
@Лол-о4э Жыл бұрын
Сварщик это художник как кисть ходит по полотну так и электрод ходит по стали!!! Великие люди
@tomscott1159
@tomscott1159 Жыл бұрын
Almost exactly 45 years ago I began my first job as a structural engineer. My new employer had an ancient IBM 360 and large plotter doing one main job: laying out large versions of pipe-joint-templates such as this for huge offshore structures. That darn old machine may still be doing the same work for all I know.
@ling524
@ling524 Жыл бұрын
你现在多少岁了
@tomscott1159
@tomscott1159 Жыл бұрын
@@ling524 68
@StonyRC
@StonyRC Жыл бұрын
Bravo, that's just magnificent. So fundamentally straightforward and the finished result is beautiful. Nicely done.
@KenFullman
@KenFullman 7 ай бұрын
I would have preferred a bit more detail about the measurements he was making. It has peeked my interest sufficiently to find a more detailed explanation, even though I'll never use such knowledge. Now I just have to know how it's done.
@weekendhoppers
@weekendhoppers Жыл бұрын
Respect for local welders has increased a lot after watching this video, they don’t spend time on all these geometrical designs and straightaway come up with such tricky joins 😊👍
@sickwilly1171
@sickwilly1171 Жыл бұрын
Oh we use geometry and trigonometry all the time. Sheetmetal pattern layout, if you've never checked it out, Google it, fun stuff. First you get to figure it out, lay it out, the make it. Retiring in May, 39yrs Sheetmetal Worker. Been a fun career.
@cw4608
@cw4608 8 ай бұрын
I am not a metal worker, but I find it fascinating to see how craftsmen do a job so expertly
@berndmutze9469
@berndmutze9469 Жыл бұрын
Sehr gute Arbeit! Die Erläuterungen genial dargestellt. Leider gibt es in Deutschland immer weniger derartige Handwerker
@josemanueldomingos5968
@josemanueldomingos5968 Жыл бұрын
Comme de partout, je suppose ; - (
@b4ph0m3tdk9
@b4ph0m3tdk9 7 ай бұрын
That freehand cutting was the most impressive.
@ramiltimur9516
@ramiltimur9516 Жыл бұрын
Смотрю и поражаюсь.Очень грамотно.Спасибо,хоть мне это вряд-ли пригодится.
@jovanivalterfagundes9425
@jovanivalterfagundes9425 Жыл бұрын
Adoro trabalhar com , metais , pequenos reparos nas minhas máquinas,a vale lembrar , por robi . E essa dica e um show que Deus te abeçoe, por dividir seus conhecimentos. Top top
@mane1571
@mane1571 Жыл бұрын
O importante é você ter o ferro na mão
@jovanivalterfagundes9425
@jovanivalterfagundes9425 Жыл бұрын
@@mane1571 kkkk, verdade
@Hugebear222
@Hugebear222 Күн бұрын
Great lesson, that's why I pay guys with your level of skill to get my work done.👍👍
@recurrenTopology
@recurrenTopology 7 ай бұрын
The circle and tangent line is a very solid approximation for the cosine function that describes the desired curve.
@EatinMonstersSince87
@EatinMonstersSince87 Жыл бұрын
5 minutes of my life I'm super happy I spent on this video. Anytime I see these rail corners, or similar I'll kno the amount of work that went into it. That's wild, amazing job fabricators.
@stephenroldan5107
@stephenroldan5107 Жыл бұрын
Yep
@exodust3114
@exodust3114 Жыл бұрын
I’m not even an engineer. I’ve never welded in my life. How did I get here?
@palealien
@palealien Жыл бұрын
Holy crap, he nailed it. Amazing. I watched this four times and still don’t think I could ever come close.
@LORDTREVORTON
@LORDTREVORTON Жыл бұрын
Maybe if he wasn’t a mute it would be easier to learn.
@Alotipsalo
@Alotipsalo Жыл бұрын
Hello, you are very smart. I like people who use their ingenuity to help others😊
@sandrarichardson2713
@sandrarichardson2713 Жыл бұрын
Love watching your channel. It brings back my dad with a profession he loved. Thanks. Jesus bless.
@pauloinventostube7533
@pauloinventostube7533 Жыл бұрын
Ótimo trabalho 👏 sucesso aí irmão 🤜🤛
@russkyinarodnik6661
@russkyinarodnik6661 Жыл бұрын
👍👍👍
@mariojironbello307
@mariojironbello307 Жыл бұрын
Sencillamente precioso. Con técnica todo es más fácil y Mejor.
@waysotto1395
@waysotto1395 Жыл бұрын
Я делаю это проще , пилю трубу на пиле под углом 45* потом проворачиваю её по оси на 90* и опять пилю 45 * и так с каждой трубой проделываешь по два пила на каждую из трёх труб и все быстро и просто . Тоже самое можно проделать и с квадратной профильной трубой.
@vse-prosto23
@vse-prosto23 Жыл бұрын
Сомневаюсь что у тебя все ровно получится, 🥴✌️,
@waysotto1395
@waysotto1395 Жыл бұрын
@@vse-prosto23 на стационарной пиле выставляешь угол и длину заготовки и вперёд , какие проблемы :)
@vse-prosto23
@vse-prosto23 Жыл бұрын
@@waysotto1395 проблем много будет, нужен упор продольная линия центров, я пробовал квадрат сделать с ножками форме табуретки, без приспособления никак, но выход нашёл)
@Apocalypselord
@Apocalypselord Жыл бұрын
Вот это реально вариант, быстро и удобно, самое сложное, это как можно ближе к 90 градусам провернуть перед вторым пропилом. А с бумажкой как на видео, много не напилишь.
@alexbrohovsky
@alexbrohovsky Жыл бұрын
Окей, а если из инструментов есть только болгарка, маркер и лист А4?))
@waynemartin5247
@waynemartin5247 10 ай бұрын
Excellent, after watching this video I consider myself a KZbin expert. Next time I speak to the local welder I'll be sure to instruct him correctly.
@mariomascaro2297
@mariomascaro2297 Жыл бұрын
Parabéns 👏 um trabalho perfeito 👏
@pedroresolve
@pedroresolve Жыл бұрын
Muito bom! Parabéns!🙌🙌🙌
@marcelopose
@marcelopose Жыл бұрын
Está excelente el trabajo de la plantilla hecha a mano y el corte del caño con amoladora. Sin ingletadora y sin usar computadora e impresora. Éste es el mejor modo de aprender. Además, si se usara una soldadora MIG, quedaría muy prolija la terminación.
@mercuyo87
@mercuyo87 11 ай бұрын
lo que enseñaste en este video no tiene precio, y lo que nos facilitaste el trabajo para los que no podemos pagar un curso es increible, gracias de corazón y que Dios te devuelva el triple de lo que das, un abrazo grande!!!!
@LabRat6619
@LabRat6619 Жыл бұрын
Wonderful to watch a real craftsman at work.
@ItiscalledaMANDATE
@ItiscalledaMANDATE Жыл бұрын
A properly sized holesaw in a drill press and clamped in place has always worked well for me.
@goldfieldgary
@goldfieldgary Жыл бұрын
That's the best way IF you have the right size holesaw!
@ПетрТепляков-ж8б
@ПетрТепляков-ж8б Жыл бұрын
Просто Отлично ! Вот ,что значить Мастер с Большой Буквы ! ! ! Удачи Вам и Успехов !
@mariorodriguestomerodtigue862
@mariorodriguestomerodtigue862 Жыл бұрын
Simples e perfeito maravilha
@fluchterschoen
@fluchterschoen Жыл бұрын
Oh my goodness this is awesome. For absolutely no practical reason I'm off to do this with some PVC pipe and pipe-welding solvent. I'm just thinking - you could use this method to create intricate tubular paper models or decorations. The contours can be cut flat with scissors, then rolled into tubes and joined. With some trial and error, you could figure out the best method for leaving tabs on the paper's joining edges to make joining and sticking the tubes together. I'm going to try it with paper instead!
@ToonMics
@ToonMics 7 ай бұрын
hahaha
@staninjapan07
@staninjapan07 Жыл бұрын
It is probably obvious from the following statement that I have not done this particular job before (though I have welded). Just as I was thinking "This is very long-winded, surely there is a more scientific or mathematical approach", you finished up with the drawing part and cut the shapes you needed. Then it fit together nicely. Great job!
@gidesp1
@gidesp1 Жыл бұрын
Bon tutoriel. Merci beaucoup.
@kernalkorn1514
@kernalkorn1514 Жыл бұрын
Sensational results! I would have been reaching for the square stuff instead. I learned something cool today!
@rudegor858
@rudegor858 Жыл бұрын
Молодец! Просто и изящно! 🎉 Почему так мало лайков? Все зрители умеют так делать?
@talgatturgunbayev6117
@talgatturgunbayev6117 Жыл бұрын
Міне бас
@rudegor858
@rudegor858 Жыл бұрын
@@talgatturgunbayev6117 нет ссылки
@toddprovencher7973
@toddprovencher7973 Ай бұрын
I've never actually seen this done in the field, too time consuming. Very interesting though, and it looks awesome. You are no doubt a true craftsman.
@karaokenoutyanneru
@karaokenoutyanneru Жыл бұрын
ハンドグラインダーでこんなに正確に切れる技術が凄い!
@peterewski
@peterewski Жыл бұрын
I just watched this twice and still couldn’t do that. Great job. I love watching journeymen and pros at their jobs.
@Manchetedofutebol
@Manchetedofutebol Жыл бұрын
Tenho que dá um like,sensacional!
@wagnerwerneck3097
@wagnerwerneck3097 Жыл бұрын
Perfeito!!! Excelente dica.
@deanmorgan7011
@deanmorgan7011 Жыл бұрын
I'm a builder/ plasterer, loved watching this.
@BruceKulpan
@BruceKulpan Ай бұрын
Impressive. Would a welder have a template in his tool box for making such intricate cuts?
@ValdenorRSantos
@ValdenorRSantos Жыл бұрын
Obrigado por compartilhar seu conhecimento amigo.
@vilmaestevesportella8528
@vilmaestevesportella8528 Жыл бұрын
Isso é profissional, parabéns.
@tadeuszjakubowski6470
@tadeuszjakubowski6470 Жыл бұрын
Dziękuję za naukę
how to quickly cut pipe for 90 degree joints
6:04
KULI WELDING
Рет қаралды 2,1 МЛН
Few people know about 1mm welding
8:02
الاسطي ELOSTA
Рет қаралды 3 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
This Project SAVED Me THOU$AND$ $$$
31:21
GRINwood
Рет қаралды 4,3 МЛН
Few people know this trick  Welding Secrets
4:41
الاسطي ELOSTA
Рет қаралды 34 МЛН
Few know this Way to fix a Electrical Plug When it is Broken!!
4:55
Creative Master
Рет қаралды 9 МЛН
INGENIOUS TOOLS YOU'LL WANT TO BUY
20:54
TechZone
Рет қаралды 7 М.
Round Pipe Cutting idea // 45 Degree Angle Cutting
6:14
Fab2Ku
Рет қаралды 19 МЛН
secrets of joining round pipes, how welders do it | how to cut
8:38
INDO WELDER
Рет қаралды 3,2 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН