Was feeling a bit down after my O5 T5 MOT disaster...but this has renewed my faith...steering rack here I come 👍🏻
@stitchesandsteel3 жыл бұрын
Get it sorted!
@marcussmith4483 жыл бұрын
A beauty. The way you view vans has made me much more chilled out about my van. It’s about the purpose, not how pristine it looks.
@stitchesandsteel3 жыл бұрын
The T5 Chassis is gonna be a cult vehicle. Don't sweat about fixing them up and keeping them going. Far from a stupid place to put your money!
@farvertex3 жыл бұрын
Love the idea of “conversion plans”. Really smart...
@stitchesandsteel3 жыл бұрын
Thank you.
@bensonlifestories3 жыл бұрын
What a beauty.
@stitchesandsteel3 жыл бұрын
Your new one shown up yet?
@bensonlifestories3 жыл бұрын
@@stitchesandsteel hopefully on the 30th
@farvertex3 жыл бұрын
How very nice. The ceiling system is just AWESOME
@stitchesandsteel3 жыл бұрын
Thank you. Gonna go live in DIY instal mode this week too.
@farvertex3 жыл бұрын
@@stitchesandsteel how cool!! Is it possible to buy the stencils for furniture and wall panels for this conversion from you? we are outside the UK...
@stitchesandsteel3 жыл бұрын
@@farvertex It is something that is on the cards. We're getting our heads around the Kombi and a few other models, then the panels and other items. Thanks for the kind words.
@BigArch65643 жыл бұрын
Cracking idea and great vlog from the lads!
@delararesadv91403 жыл бұрын
I want that S&S rear wheel mount for my barn door! 👍🏻
@stitchesandsteel3 жыл бұрын
They're coming. Don't sweat.
@RichardBCumbrianModelRailways2 жыл бұрын
Less is more.
@AgzyCarini3 жыл бұрын
That is one B-E-A-UTIFUL van
@stitchesandsteel3 жыл бұрын
Thank you.
@Badboyrich19823 жыл бұрын
Great work love it :) get some cherry blossom on the bumpers :) \m/dublife 🤙
@stitchesandsteel3 жыл бұрын
Pristine bumpers on something this ratty didn't sit too well with us on this one. Cheers for the heads up!
@h12st_d633 жыл бұрын
Are you going to be offering plans for a Kombi too please?
@stitchesandsteel3 жыл бұрын
Yes Ma'am. We're nesting the shapes onto the paper as we speak. This time next week we should be good to go. We'll get a film made about that setup too.
@matthewharrison81213 жыл бұрын
@@stitchesandsteel sweet, are you just offering the paper plans, or have you thought about a PDF that those who have access to A0 plotters?
@Cous1nJack3 жыл бұрын
@@matthewharrison8121 they may as well put a link to a google drive on the forums themselves. At least paper can only be shared a few times.
@matthewharrison81213 жыл бұрын
@@Cous1nJack yeh you’re right, it’s a shame that’s the case though. People just don’t seem to be prepared to pay for services nowadays. That said, it’s still open to abuse. I know my AO printer also scans. Just got to have some trust in the community 🤞🏼
@thomasdentith-barnard4183 жыл бұрын
Rapid build! 🤙
@stitchesandsteel3 жыл бұрын
The one day special.
@andypeel10183 жыл бұрын
Chunky wheels & tyres is a quality look. What width are the 18” wheels and what size tyres did you put on them?
@sterling123.3 жыл бұрын
6:52 you can see the label on the spare tire: Insa Turbo Ranger 255/55 R18
@andypeel10183 жыл бұрын
@@sterling123. well spotted. Thankyou.
@Dddddddd3483 ай бұрын
Are these still available?
@nevillebloodybartos3 жыл бұрын
That rust will just get so much worse and multiply if it’s not addressed ASAP... VW commercials rust quicker than you can weld them up... much better to spend a few extra grand getting a better van than spending every MOT cutting out more and more tin-worm... I hear ya tho... many a good tune played on an older fiddle... and I’d rather drive a rusty Transporter than a pristine Renault Traffic
@h12st_d633 жыл бұрын
Nobody deserves a traffic 🙈
@jamesraff893 жыл бұрын
Epic
@Olan...3 жыл бұрын
I don't do Facebook or Instagram etc ....do you have a website where I can see your products ????
@stitchesandsteel3 жыл бұрын
Sure do. throw stitches and steel into google or copy and paste www.stitchesandsteel.com
@Olan...3 жыл бұрын
@@stitchesandsteel thanks very much
@carplineout3 жыл бұрын
The bad is mint need one of them like 👍
@stitchesandsteel3 жыл бұрын
Cheers.
@andreasdahl7173 жыл бұрын
Perfect!
@stitchesandsteel3 жыл бұрын
Thank you. Not quite perfect but that's kinda where the perfection is. They go better a bit dinged up.
@stewartjackson18213 жыл бұрын
Probably stupid question but, will these floor plans be available on your web site and will they cost much. Cheers 👍
@stitchesandsteel3 жыл бұрын
Not a Stupid question at all! It's why this video exists. Pannel van LWB + SWB plans are live on the site right now. More models are arriving as we.... excuse the pun... Roll them out.
@richardsayer15333 жыл бұрын
Love it 😍
@stitchesandsteel3 жыл бұрын
We wanted to keep it.
@liquidlowrie24142 жыл бұрын
by any chance do you know the wheel and tyre spec ?
@josefhaimerl24223 жыл бұрын
What are your thoughts on crash safety and the hanging bed?
@stitchesandsteel3 жыл бұрын
Heya Oskar. Technically it doesn't need testing however... We have used the same rigging and hardware that keeps sails and masts attached to boats. It's constructed and fitted using the best hardware around in a way that keeps it very secure while on the move.