Stjarnagloss Först & Stjarnagloss Snö: Which One To Choose When?

[@AutoCareHQ]

Great demo as always Viktor. I really like the look of Forst, I think I'll pick up a bottle of it soon! Citrus pre-washes are such versatile products as you did a great job of showing. I'm looking forward to seeing how you get on with the rest of their products :)

[@RoadToDetailing]

Thank you Heather!🙌 I highly recommend Först, I really enjoy using that. Very very versatile, yet strong product. I found it dries out slightly quick, but that hence for a windy weather I was at during using. A bit pricey as it’s RTU, but definitely gets the job done when need something stronger than usual. Can’t wait to share my thoughts about the rest of the range, but overall, I’m impressed by Stjärnagloss so far. 🙂

[@HypnotizinDetailz]

Great thorough demo Viktor, looking forward to the next episode and seeing the development of your project! 👌🏻🤩👍🏻

[@RoadToDetailing]

Thank you Laci 🙌 can’t wait to share my thoughts about the rest soon 🔥

[@gillywash1487]

Well demonstrated with the different ways to use these products together. They may not individually be my favourites but they do make up a great system. Look forward to seeing the rest of the range 👍🏼

[@RoadToDetailing]

Thank you Nick! I really liked using them all, and they actually did better than I expected before start. Now, I got the idea why many people love using Stjärnagloss. Can’t wait to share my thoughts about the rest of their range 🙌

[@gert-janvandenberg4156]

I really like citrus pre wash products, in general I found that it shifts more dirt then snowfoam. I only avoid using it on cars with a ceramic coating as it does effect the longevity of the coating.

[@RoadToDetailing]

Absolutely! Citrus pre cleaners have that extra bite, if needed. Especially winter months, or at heavily soiled cases. Although its strength can hurt any protection, so on coated cars, using a snow foam can be a better option, and most of the time it will got the job done. 🙌

[@craigord]

Great review, Viktor 👍🏻 Loved seeing the side-by-side comparisons! I might have expected Först to perform a bit better against Sno than it seemed to do, specially for a ‘read-to-use’ product?

[@RoadToDetailing]

Thanks Craig! It was really hard to showcase its real performance on that certain panel. But the side by side testing is more likely a demonstration of my exact scenario. Unfortunately those stains I had, could be very hard to any chemicals to move, as they sat on the panels too long, only physical agitation could move them fully away. But the level of traffic film was removed much better by Först, than Snö on the panel, although it doesn’t really come through the camera. Also, removing bugs on a degree first did, can show how strong that product actually is. So don’t underestimate Först, it’s very very strong, even if we just look the amount of dirt it removed from the tyres. 🙌

[@craigord]

Yes, very true, it did excellent on the tyres and moved the bugs well! I’ve definitely experienced differences in how well the same pre-wash can perform, which I guess is down to a number of variables (nothing will work perfectly 100% of the time, right? Haha)

[@RoadToDetailing]

@@craigord exactly! The number of variables can make the same product looks worse or better, depending on the circumstances, climate and many many more. Först is an excellent product with a very good versatility, also. Although there’s no pre wash product that would do a 100% cleaning, but they “don’t have to”, the goal is to remove as much of the traffic film and grime as possible prior contact wash.

[@ristretto97]

I wonder if you could mix a little Forst into Sno or another foam to give it a boost. Forst foams pretty well.

[@RoadToDetailing]

Can be a good idea, but I am not sure you would achieve the desired outcome, as well as it would change snow from being pH neutral. If I would need more bite, I would spray Först on the lower parts of the panels, then cover the whole car with snö. In that scenario, snö would help with a longer dwelling time to först, and that combo is really beneficial, however, not cost effective enough. And at the same token, it all depends on the level of dirt you need to deal with, also has the car protection or hasn’t. :) But, generally, adding först to the mix would definitely help on getting more cleaning power, but the question would be, in what ratio 😊 this is the beauty of car cleaning 🙌

[@HK91104]

Can i Use the Först as Iron Remover on the Rims? good results?

[@RoadToDetailing]

Hi H K, Nope. You will need Hjul to fully remove embedded iron particules for a nearly perfect result. Först, however, will do a decent job on wheels, and would probably remove the vest majority of those kinds of things, but I would definitely use a dedicated iron&fallout remover on wheels, if needed. At the end of the day, it all depends on the exact level of contamination on the wheels. If that’s not too bad, först will handle it, if it’s bad (heavily embedded particles) then you will need a dedicated product, for example hjul (from Stjärnagloss). Here is a full video using Hjul after and/or before Först, so you’ll get an idea: kzbin.info/www/bejne/rpuYnaGvdq-Si7c Hope it helps, Viktor

[@HK91104]

Thanks a lot. ❤ ill buy the hjul

[@RoadToDetailing]

@@HK91104 that's a good product, let me know how you will get on with it :)

[@devilisinthedetailgbr]

The snow foam is so thick, great coverage. Is that from just a small amount of product ??

[@RoadToDetailing]

Hey Ben! Yes, thick enough and stays on the panels for so long I was quite impressed by it. In the video, in the IK foamer I had only 20ml to 980ml water, in the MTM I had 100ml to 900ml in general, but I tried 45ml to 455ml in the same cannon on the following day (which I had the footage in this video at 8:48 and 9:43) and it did just as well with only that amount, that I would consider small.

[@pubycsek69]

Hogy nem MJJC használsz hanem MTM-et? 🤷 A short gun tipusa? 🙏😉

[@RoadToDetailing]

Ami volt MJJC-m azt ajándékba adtam a srácoknak írbeb, akik segítettek helyet biztosítani. Illetve a short gun miatt is. De hamarosan veszek egy MJJC-t 🙄

[@pubycsek69]

@@RoadToDetailing az a bejövős mindenkinek úgy tünik!! 🤷😀 Es short gun-ban mit ajánlsz?? Ott mind1 a magasnyomasu kompatibilis mindel?

[@RoadToDetailing]

@@pubycsek69 shortgunban szerintem az alis megteszi (nekem az van es megeri az arat). MJJC-nel ki tudod valasztani, hogy milyen magasnyomasuval fogod hasznalni es olyan adaptert kuldenek, de az is cserelheto akar kesobb.

[@pubycsek69]

@@RoadToDetailing azt lattam 5fejjel 5-6 ezerert! Ahhoz adnak mindent egybol lehet csatlakoztatni a magasnyomasuhoz?

[@RoadToDetailing]

Nem. A csatlakozot itt is a magasnyomasuhoz meg ki kell valasztani 👍🏻