Stock Pulley vs Racing Pulley

[@joshuapena4038]

Boss tanong kolang po.. Kunware nag palit ako ng racing pulley sa click 125 ko pero stock bola lang gagamitin ko pati center spring and clutch spring Ok lang poba yun ? And magiging ok din ba performance Salamat !!

[@sablesflorencejohn6880]

Boss kamusta na try mo na yan? Ganyan din sana plano ko ngayon e

[@Gab-hw9yl]

Lodi, pwde ba i combination ang stock driveface at tsaka racing pulley? Mas maganda kasi yung cooling effect ng stock driveface at tsaka mas gusto kung isagad ang bola sa pulley

[@MarcsonMotoPH]

Pwede pero pangit na lapat ng belt kaya hindi advisable. Dapat set talaga dapat.

[@cyrusjaygaldiano495]

Boss pwede ba e partner ang 13.5 degree drive face tsaka stock na pulley

[@MarcsonMotoPH]

Hindi po advisable magkaiba sila ng angle. Tabingi ang kain ng belt.

[@cyrusjaygaldiano495]

@@MarcsonMotoPH sige boss salamat

[@ceasarformantes8207]

sir pwede magtanong po..kase sa sali po ako iton dos for dos endurance po sir..pero un side ko po sir..stock pully and drice face and naka. 14g straight stock center spring stock clutch spring stock bell stock lining ok po ba yan sir pang long ride po sir .pakk sagot lang po salamat po

[@MarcsonMotoPH]

Kahit all stock pa yan sir kayang kaya mag long ride yan. Basta genuine na matibay.

[@ceasarformantes8207]

​@@MarcsonMotoPH opo sir stock po lahat po sir..un lang bola na palitan kan ko sir...nilagay ko 14g straight sir

[@ceasarformantes8207]

sir pwede magtanong po sir...honda click 125 motor ko po sir.. naka SUN PULLY po ako sir straight 14g center spring 1000rpm stock clutch spring stock.bell stock lining po

[@ceasarformantes8207]

sir pwede magtanong po sir...honda click 125 motor ko po sir.. naka SUN PULLY po ako sir straight 14g center spring 1000rpm stock clutch spring stock.bell stock lining po

[@RandomVids20236]

Boss balak ko sana try jvt pulley, 14g ball tapos stock na lahat ok lang ba ganung set up lods?

[@MarcsonMotoPH]

yes sir ok lang yan.

[@RandomVids20236]

@@MarcsonMotoPH hindi ba sya delay sa arangkada lods 140kg kami kasi ni misis

[@RandomVids20236]

Napa install ko na lods, ganito ba tlga pag naka pulley set? Ang hiyaw ng makina.

[@sablesflorencejohn6880]

​@@RandomVids20236boss kamusta jvt pulley tapos stock na lahat? Ganyan din kasi plano ko e

[@RandomVids20236]

@@sablesflorencejohn6880 jvt pulley 13g straight tapos jvt 1krpmp both springs. Problema ko now is dragging from 5-10(galing full stop) lalo na pag medyo pataas yung daan. Parang kinakalampag fairings ng motor ko sa lakas ng dragging. Kahit kakapalinis ko lang. Balak ko ibalik stock springs

[@cristophertayag9692]

Boss kamusta ang rs8 pulley set? Mas ok ba kesa sa avocado pulley set??

[@MarcsonMotoPH]

Hindi ko pa po nasubukan ang avocado sir. Pero sa rs8 compared sa stock malaki pinagbago lalo na sa arangkada.

[@cristophertayag9692]

@@MarcsonMotoPH boss bakit nung nag rs8 ako tapos 14g straight then 1k straight springs sobrang mahiyaw bago umarangkada?

[@mohammadshadraldinmuamar7472]

Boss kasya ba stock bushing sa rs8?

[@MarcsonMotoPH]

yes sir. stock gamit ko.

[@jericocampos7526]

paps sana may video karin about sa brake oh paano magpalit ng brake fluid

[@MarcsonMotoPH]

Sa Honda Click wala pa sir. Ibang motor meron.

[@MarcsonMotoPH]

kzbin.info/www/bejne/r5XbonWri9aHnKs

[@jericocampos7526]

salamat paps

[@alpresbitero9813]

Boss sana sunod Pano mag install ng winker eye Salamat More power

[@MarcsonMotoPH]

Sige sir try natin mag hanap ng mura at quality na winker eye ng motor. RS

[@dtravellermotovlog4335]

paps na try mo na ba gumamit ng pang racing..ano ang magiging top speed ng click 125 kung gagamit ako nyan..

[@MarcsonMotoPH]

Increase acceleration and additional topspeed. Pero dapat naka tono ang pangilid.

[@dtravellermotovlog4335]

@@MarcsonMotoPH ahh ok salamat paps👍

[@nelsontv6624]

@@MarcsonMotoPH pano magtono ng gilid idol

[@MarcsonMotoPH]

@@nelsontv6624 trial and error sir. Naka depende parin sa riders preference.