Рет қаралды 11,572
In this video, I discuss creating a flush/rub-over setting using a setting bur. I cover how to burnish your setting, how to know when your stone it deep enough, and what burs to use. I also discuss troubleshooting and the use and care of the different burs used with this type of setting. This video is also the setup for Flush Setting 3 ways - Part 3, which covers flush/rub-over settings with the hart & ball burs. Please see Part 1 first as a lot of the basics like layout, measuring your stones, metal thickness, uses, etc. are covered.
Part One: • Stonesetting: Flush S...
Part Three: • Stonesetting: Flush S...
Flat Square Edges on Metal video: • Flat Square Edges on S...
Many of the tools and materials are the same in all of these videos. Check out Part One for a complete list! • Stonesetting: Flush S...
Ran out of room on part one's, video details page! So, posting this one here. This is great for a quick change handpieces and using larger bits:
Collett Adapter aka Twist drill adapter - Otto Frei: Part # 128.216.
Amazon: haven't tried them so, I don't know how they are. Here's a link: amzn.to/3KzpDSv.
My website: Metalsmithing from A to Z, Nancy.LT.Hamilton.com is LIVE and KICKIN'!
My store is open for business!!! NancyLTHamiltonShop.com
Pinterest: / nancylthamilton
Facebook: / nancylthamiltonjewelry
Instagram: @nancy.lt.hamilton
Thank you for watching! If you enjoyed this video, please consider "liking" and of course, subscribing. Don't forget to allow notifications or you'll never know when the next video will be out!
Quick links to video chapters
0:13 Introduction
0:56 The setting bur: layout and divoting
2:10 Drilling the first hole
3:03 Ideas for cleaning burs
3:28 Ball bur VS. a drill bit
3:58 Ball bur
4:15 The bud bur
5:27 The setting bur
8:28 Burnishing
12:35 Troubleshooting
15:16 That's it! Summary
This page may have an affiliate link or two (or 20! ha!).