Stop Start Deactivation with DDT4ALL in the Renault Megane IV

[@MicheleP]

⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: kzbin.info/aero/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj

[@alpman1144]

I bought the model you mentioned before. Is it correct that even reading with the dd4all is not possible?

[@antim-andrei3279]

Same. It arrived 5 minutes ago the first obd2 interface. There is no other solution for using this instead of the new one?

[@MicheleP]

@@antim-andrei3279 unfortunately yes. I'm sorry guys but at the moment I made the video the first OBD worked great. The probably changed some internal chips. You can send back to Amazon and pick the new one

[@alpman1144]

I got today the new type obd tool. It works. I have clio IV, for that I need to find the correct variables. But I could manage to disable the TPMS and seatbelt warning sound. Not the light. That is ok for me. Thanks Michele. Maybe one time a movie of some abrivations in ddt4all, explaination the ones you know.

[@antim-andrei3279]

@@MicheleP i got the new one. A little problem: i need to stay with the finger on the power button. If I let go all leds turn off. Do you know what is the problem?

[@kawarinus]

Hello Michele. I have switched off the start / stop system, switched on the cornering lights, switched off the video restriction, changed Km / Liters in the on-board computer and have the parking sensors visible in the dashboard. Thanks for the good videos.

[@MicheleP]

You’re welcome!

[@Ycamasayer]

Without calculator problems ?

[@GregTheGuitarist]

Thank you so much. I will try this in my Clio IV. Hope it will help to save my battery and alternator as well 😅

[@K_Sadek]

Can I change the start and stop setting so that it is controlled by the switch under the radio, but does not reset itself every trip?

[@andreaferrandes9662]

Megane 1.5dci 09/2016 ha funzionato! Grazie x la guida!

[@MicheleP]

Grande, sono contento!!

[@anthonysuckerman9432]

Hello Michele could you Please give me a answer for my Renault Master 2017 settings if Possible.Thanks

[@grtbgf]

what other things can you code? Maybe enable scrolling through songs/radio stations while climate screen is on? And the peeping alarm when the car locks itself?

[@SilvioRodrigues-h5y]

Extraordinary!! Thank you very much!

[@ihammadb]

You saved my life bro 🌹🌹🌹🙏🙏🙏

[@josephine2639]

Hi, would this work on a 2017 renault kangoo 1.5dci?

[@radugenis9698]

Can you activate the blind spot warnin? I have parking ecu, all wiring and mirrors from a car that has the feature.

[@vincent7875]

Hello Michele, very good video thnak yopu. I have a question, is there a way to turn off the idle when in eco mode permanently?

[@MicheleP]

Yep, in the DDT menu there’s a flag called “sailing in eco mode”

[@robertobobby100]

Hola Michelle, me gustaría saber si sabes de algún programa para poner CarPlay pantalla completa en Megane pantalla vertical muchas gracias

[@מוטיפלצי]

Hi, Thank you for the exalent video. Is there a way to open and close the side mirrors in 2016 Renault kadjar?

[@stasvikeshin7766]

Hello I have a question I had Megane 4 2018, I programmatically disabled the start stop now I bought a megane 4 2023 and the ecu does not respond to shutdown start stop commands and other data changes. after saving the changes, all parameters are returned to stock Maybe new models have some kind of protection?

[@andreipupaza38]

Dear Michele, could you please let me know if these steps can be applied also to Kadjar model? I have the same interface and software like you. Thank you in advance

[@MicheleP]

yes! of course! no problema at all for your Kadjar! Just select the correct car at the beginning and you're done!

[@andreipupaza38]

@@MicheleP thank you for your reply and also for the tutorials related DDT4ALL, very useful information! All the best.

[@andreipupaza38]

@@MicheleP Now, I saw something that it concerns me related the ACTIVE EMERGENCY BRAKING. Could you please make a video and show us where to check if this is available on our cars? If the system works with front camera or with bumber radar and how can be tested? Thank you in advance

[@MicheleP]

@@andreipupaza38 i guess that on kadjar the AEBS is not available. The problem is that in the Kadjar you don't have the front radar under the renault logo (the distance from the vehicle behind is shown in the dashboard). If you don't have this rada you won't be able to have the AEBS

[@andreipupaza38]

@@MicheleP it is strange because couple of days ago I had the orange warning light on the dashboard showing two cars colliding with a message Active Braking disconnected. Rainy weather with mud.

[@lucairondog5466]

congratulations for your videos. In your opinion, is it possible to create a latency on the start & stop insertion time? I have a Megane with an automatic gearbox, so every time I stop, the engine stops. At intersections it's a little annoying, as the instructions for use and maintenance, you should touch on the brake pedal, but it isn't always possible. What do you say?

[@MicheleP]

i say that start and stop is bulllshit :) i mean, i hate it too, and i deactivated it permanently; unfortunately you are only able to do an on off, you can't modify latency (or i never saw a flag o cluster to change time)

[@MrJabichocu]

Hello, i have used this method on Captur I and stop-start is inhibited, but I have DTC 926755 on diagnosis (not on the cluster) anybody else has this error??

[@anthonysuckerman9432]

Hello Michele.I have a Renualt Master 2017.Can i do the same.

[@szefu0]

I would like to know myself but matey is not responding 😔

[@NevilleBaker-u7l]

How do you download the 'yellow' shortcut engine logo on windows to apply the adjustment

[@Columbariusify]

Very nice! Is it same procedure for Dacia Duster II ?

[@rafadudek2613]

It worked on my 2017 Kadjar aswell

[@gabbodj10]

Facendo così sarebbe permanentemente spento o normalmente spento e al tocco del pulsante si riattiverebbe?

[@tinko975]

very nice tutorial. i have older megane 3 with lights automatically turned on. it is called "scandinavian mode" , vhen i start engine, front and rear lights turns on and i cant turnt them off. how to deactivate that mode that i can turn off all lights manually? also i noticed instalation and bulbs for front daylight lights but those bulbs not working. how to activate thode daylight lights? thanks.

[@MicheleP]

You have to search in the lights cluster a value called Scandinavian mode cf, it should be 1, you have to put 0

[@tinko975]

@@MicheleP thanks. Engine must running while doing this or just card inserted in place?

[@MicheleP]

Card in place, with dash on 👍🏻

[@tinko975]

Michele Predieri thanks, then how to turn on DRL lights? I have bulbs and instalation, but bulbs are not working, should work when switch is turned in off position.. thanks in advance.

[@vicentejaimeolmedovelazque5727]

hola buenos dias se puede desactivar el aviso de star&stop desactivado gracias

[@Marco80web]

Ciao Michele ho acquistato il dispositivo OBD2 e installato su pc ddt4all: a me compare dappertutto NODATA, nel corso di questi anni ci sono state delle variazioni? la mia auto è una Megane IV serie di fine 2020. dovrebbe funzionare oppure non è più possibile?

[@brunolopes3865]

is posible disable energy safe mode (not turn off usb ports) ?

[@mtsoworld]

Hi man thanks for your all tutorial videos. Is it possible to activate Start Stop with just the using button after DDT4ALL editing? I mean the car always start unactivated startstop after I press button its start working?

[@qlimaxseeunextyear]

Dear Michele !!! first of all bug fan of your videos. now...I have a renault espace v and i saw on internet you can buy head up display and a rear view camera. i know functions are not in the menu so i ask can you activate them on ddt4all after i install them? plz let me know and keep up the good work !!!

[@alessandrobottalico810]

Ciao Michele, oggi ho provato a disattivare lo S&S ma nella pagina dove c'è il bit da cambiare ho tutto in rosso con NO DATA. Utilizzo l'adattatore da te consigliato nel tuo commento posto in primo piano. Per quanto riguarda la lettura dei km effettivi dell'auto tramite centralina ABS così come tutti i valori visualizzabili in marcia, nessun problema funziona tutto perfettamente come da tuoi video. La mia è una Mégane Sporter del 2019. Grazie Alessandro

[@RhinecnthusAssasi]

What about Megane IV 2019 GeandCoupe (Sedan) What to chose?

[@ivantozzi423]

Ciao Michele e complimenti per i tuoi video. Una volta disattivato lo start e stop e' possibile eliminare la notifica/spia sul quadro?

[@peterr6761]

Hello! Can I turn off the start / stop green pictogram on the display? I don't want to be there after deactivating in ddt4all.

[@EugeneHennessy]

When i try to use dd4all on my megane 3 i keep getting "no data" in red, i have the same wifi connection as you have, any ideas why im getting no data?

[@mariusking0]

Hello , I have a question , I have a Kadjar 2016 , which one from the 3 from ddt4all should i use?

[@jokso22]

I have Kadjar 2015, used first

[@skyline7891]

Talisman 1.6 dci 160. 2017 its work. Thx. Greating from Polen ✌️🔥❤️

[@lloydlow873]

Hi bro, can this be used on Grand Scenic IV too?

[@luigirossi3231]

Ciao Michele non sono riuscito a modificare la velocità dei tergi dato che ho un grand scenic IV con settaggi di fabbrica penosi. Ma purtroppo un valore non lo sovrascrive. Ci sarebbero delle soluzioni??? Se vuoi in pvt ti spiego tutto meglio nel dettaglio. Grazie anticipatamente

[@karledenvann6354]

The latest videos i seen, they use a modified obd2 cable with 4pins switched. is this needed for any of your modifications on a Renault Espace V 2016? Best regards!

[@MicheleP]

THE pin switch is for entering some specific ecus. For “normal” mods you don’t need a modified pin obd

[@karledenvann6354]

Great! Thank you! i start without and see how far i will go. Most often i test things to the breaking point "till i break it 😂" then get stressed and works out a solution most often. You dont know if you dont try :) ​@@MicheleP

[@karledenvann6354]

@@MicheleP Can you Please help with one more question :) I get mixed answers from internet and my Renault shop. I have 2016 Espace and 2.2.19.300, can i safetly "understand at my own risk" install 3.3 from internet and will android auto work to activate from service menu then? Have a Great weekend! Best regards Karl

[@giorgospapadopoulos1416]

Hello, I got the message "Check SOS Call". I am trying to go through ddt4all in order to deactivate "Aux-In Info/Tel-Mute-Output" and "Virgin Configuration", but it doesn't work. I press the "Einstein" button in order to activate expert mode and change the values from "Activated" to "Deactivated", I press "Write activation status of DTC" and then "Key On/Off Reset" but nothing happens. If I refresh or close and reopen ddt4all both options are still "Activated". Also, in the "Read" right column, I can't see if an option is "Activated" or "Deactivated", they are all write "NO DATA". Do you know what do I have to do in order to be able to deactivate both options or if there is any other way to remove the error "Check SOS Call"? I would appreciate any kind of help. Thank you in advance.

[@strahinjadjordjevic9361]

Hey king, I got the same obd2 reader and ddt4all software but my wifi dongle won't connect with ddt4all. always trying to find the connection but won't find and connect. Can you please help me ?

[@MauroDiMauro82]

Ciao I tuoi video sono molto utili ma a me farebbe comodo che lo start & stop fosse disabilitato quando accendo la macchina ma che sia possibile abilitarlo con il tasto. in pratica l'esatto contrario di quello che succede di default. E' possibile? Grazie in anticipo

[@stefaneduard8169]

Is it the same for the Dacia Logan 2 faze 2? I'm wondering this because it is owned by renault...

[@adylol162005]

Why dont u config the cluster so u dont have that start and stop light allways on in it?

[@MicheleP]

Because that light is not annoying me 😂

[@adylol162005]

Michele Predieri 😂.i also have this mod on my Clio 4 Rs Trophy but also disabled light in cluster.

[@MicheleP]

How’s the trophy? I bet it’s bloody quick!

[@adylol162005]

Michele Predieri its great! Also the edc gearbox makes it even more fun to drive!

[@adylol162005]

Tadas Balasaitis u need ddt4all . Then go to cluster. Its easy

[@DannySardo1]

Ciao Michele. Do you know where I can find the "new" codes for the Megane phase 2? The names for the ECU's in my car (12-2021) are different from the ones you mention

[@MicheleP]

maybe different names, but same working path

[@DannySardo1]

@MicheleP that may be so. But if you mention ECU 1.2 for example and my car shows only AB1 how do I know which to choose

[@motocalinnarcis]

I don't like this method, I had it done like this but the start stop cannot start notification from board is crazing me. Try to deactivate it from Engine Control Module, one of the EDC17C84 lines, and go to start stop, help start stop configuration and change the 1st line to "Start Stop disabled for diagnostic tool". I said one of EDC17C84 beacause usually is working with 1st one, but in my case worked 2nd. With this proceedure no board notification is displayed, the led from start stop button start bright and cannot be actioned.

[@enghaigoh5885]

Hi, thanks for the video. Do you have an Amazon link for this model of OBD2 adapter?

[@MicheleP]

amzn.to/2BZEkNK

[@alemtalic5535]

Hello Michele ! I followed the exact same procedure ( except car select, I have Megane 4 Sedane ) , I double checked, the values did go from 0 to 1, but START/STOP remains same... When I press the phisical button, the STARTSTOP is OFF, and when its not pressed, its ON ...

[@davutcrak]

do you have solution for this,I have same issue

[@alemtalic5535]

@@davutcrak yes, when I wrote that comment, I also had a problem, steering wheel started locking as soon as u turn the engine off, 100% of the times, no exception, regardless of steer wheel position... So I went to revert changes, and tried again, all the same. And it just " worked " but, dont touch the button, turn the engine on, put it out of gear, and just raise the handbrake. After a few moments, a green crossed "A" will appear, letting u know that the start stop is off . If you press the button, it will say that it is "OFF" now, but it will actually be "ON"

[@vasilissideris4687]

Hi Michele, is this possible with Renault Clio IV dci 2017 ? Because in DDT4ALL i can't find the same command for start-stop deactivation in the menu for CLIO IV ...

[@KarimDK81]

You are TOP bro!!! I have a question I have been in delvoper mode in my grandscenic 4. I did something stupid inside there then I get black screen. everything work fine the radio and touch on the screen but the screen is black I can't see anything 😅 do you think I can fix this with ddt4all?

[@MicheleP]

well... i think you have to go at dealership...

[@KarimDK81]

@@MicheleP have been 3 renault places they don't know how to do it 😅

[@tanitab2]

Ciao Michele, complimenti per il canale e per le guide. Ho provato questa guida sulla mia Megane 4 che ho ritirato questo mese 10/2019 ma dopo che disattivo lo S&S da DDT4ALL faccio un pezzo di strada e mi fermo, spengo l'auto riaccendo e riparto ma lo S&S si inserisce di nuovo. ti e' capitato anche a te per caso? Grazie

[@MicheleP]

ti consilgio di: vedere che la modifica sia stata effettivamente fatta.. dai un occhiata a DDT4ALL e assicurati che il parametro modificato venga letto correttamente. nel caso prova a rifare la modifica e prima di avviare l'auto chiudila a chiave per una decina di minuti, in modo che tutte le centraline si "addormentino". Quando la vai a riaprire le centraline ripartono "da zero" e dovrebbero acquisire il nuovo valore. a volte capita che le centraline non si spengano del tutto e tengano comunque in memoria il valore precedente

[@tanitab2]

@@MicheleP Perfetto, grazie. Ho eseguito di nuovo la procedura ed ora funziona correttamente. Mi domando cosa può succedere se premo sulla plancia il pulsante fisico di S&S? Si riattiva o rimane sempre disattivato? Grazie di nuovo

[@MicheleP]

@@tanitab2 non succede assolutamente nulla 👍🏻

[@justinchan5797]

Thanks for the video. Do you happen to know how to install google play app on rlink2?

[@imseyd]

How can i enable eco mode in my clio 4 1.2 joy 2018 with ddt4all ? Thank you.

[@milanmladenovic7654]

Dacia duster 1.6sce 84kw 115ks 2018g stop and start deactivation?

[@youssnouf]

hi is there a menu to desactivate the message "start stop problem"

[@cosmina8173]

Ciao! Con ddt4all è possibile programmare una nuova chiave?

[@SPLaserworks]

Theres a a way to close the Windows when you lock the doors?

[@lianghao2352]

Excuse me, ddt4all (KOLEOSII M5R) is there any way to activate cruise?

[@heinng9385]

Hi, do you have video on how to activate Lane Departure Warning?

[@MicheleP]

you need to have the front camera, if you have it you will find the relative option in drive assistant menu

[@heinng9385]

@@MicheleP I can see the front camera inside a housing at top centre of wind screen, but LDW seems like disabled by Renault/ local car vendor. I understand from others, my car is hardware ready but was disabled because not included in sales package and only activated for more expensive version. If you have such video to activate LDW through DDT4ALL, please enlighten us.

[@Dallco83]

I am sure you can deactivate the stop start by pressing a button on the megane. Surely this is the same as doing it through the software ?

[@MicheleP]

yes, but by only pressing the button you have to do it every time you start the car, with this modify you write a value in the ECU, so it's permanent. you don't have to press the button every time

[@JohnJohn-fn8qn]

Michele Predieri Does this also work on Captur 2016 ? My start stop is not working at all i want to get iT working again do i have to set the value to 0 to get iT working? And other question if its not working How can i remove the message from the dash? Everytime i get a message wich says start stop not working and its very annoying. Thanks for the great vid

[@JohnJohn-fn8qn]

Michele Predieri sorry other question i see also on the web elm327 is this one better wich you have the Bluetooth device?

[@miladinseratlic5984]

does it work on dacia sandero II (1.5dci) ?

[@soldiers303]

do you think it will work on megane 3? I have seen the settings for my car but when i disabled in in the uch it just says check start stop. But i want to remove it properly.

[@zaikavirus]

Hello man do you know how to dezactivated antipoluation sistem???

[@MicheleP]

You have to cut it off 😅

[@zaikavirus]

@@MicheleP ok but with ddt4all error need tu turn off :)

[@peterr6761]

Hello! I wanted to turn the start stop system back on, but even though I reset the value to 0, the startstop doesn't work. What else to do? Please help!

[@javierg.q.5546]

I have the same problem. Could you help me?

[@MicheleP]

You guys have to wait, it take some time to recalibrate, it could take even a week

[@peterr6761]

@@MicheleP Thank You! :-)

[@kawarinus]

Michele Some cars with a rain sensor can automatically close the roof when the rain sensor detects drops when the car is locked and the roof is open. Is this also possible with the Megane 4?

[@MicheleP]

unfortunately no, only talisman initiale paris have those sensors

[@kawarinus]

Okay too bad it's not an option. Thanks

[@alansouza07]

how to memorize the last choose after turn off vehicle ?

[@MicheleP]

you can't ;(

[@paolodrago806]

E la disattivazione dello Start / Stop? Traduci Michele per favore

[@alexshady31]

After this i had dtc error. How the duck i switch to factory?

[@micsik6653]

Hi Michele. After the changes I made in my Megane 4 GT (R-Sound and start-stop deactivation) in Multi Sense, the view of the vehicle on the Grand Scenic changed. Unfortunately, I can't change this graphic. I have a screenshot of what you see in ddt4all. Can you help me somehow?

[@MicheleP]

you have to change it with DDT4ALL, in radnav submenu

[@samyrbutic6232]

Non mi si collega obd come devo fare ? Ho una espace 5 serie e un pc w10

[@MicheleP]

Probabilmente il nuovo standard che hanno implementato sulla OBD non la rende più compatibile con DDT4ALL. Ora consigliamo di usare questa, che funziona al 100%: amzn.to/3g770w5

[@hirayaman246]

Can you also deactivate the start/stop dashboard light? I see the SS- function is deactivated but the dashboard light still shows.....when you push the SS deactivate button it also deactivates the dashboard light......

[@MicheleP]

nope.. unfortunatley not..

[@hirayaman246]

@@MicheleP Thank you very much ! Can i use an Elm interface to connect to my ECU ( wire interface)?

[@MicheleP]

@@hirayaman246 actually i never used a wired ELM, i prefer to use the wifi interface i suggest in my videos (link in description)

[@ibrahimetemcetinkaya]

Stop-start nasıl aktiflestirebilirim

[@brunolourenco6754]

Best mod ever. thanks

[@MicheleP]

THANKS!! 🙏🏻

[@robertoromano1384]

Buona sera.dove posso scaricare il software grazie

[@dimyz7435]

funziona anche con la nuova renault captur?

[@frankcellini9363]

Buongiorno Michele, I have tried to deactivate Stop/Start on my Clio RS 2017 and I got some advice from some Russian garage and they said to do the following... UPC-EMM T4_EMM_DDT2000 EMM_AlternatorManagement - Configuration C-B_STOPSTARTInhibit, SET TO 1 But when I get to second step I have many selections that start with "T4_EMM_DDT2000"... including T4_EMM_DDT2000_SW8_V2.1, T4_EMM_DDT2000_SW8.4_V1, T4_EMM_DDT2000_SW7_V1.2.5, T4_EMM_DDT2000_SW8.5_V1.1, T4_EMM_DDT2000_SW6_V3_1_3, T4_EMM_DDT2000_SW5_V2_4 So I don't know which one to select... do you know what to do or where I can find out? Thanks

[@MicheleP]

Hi frank! I always suggest you to pick the highest one, so on your case is the second on the list!

[@meniost]

Hello Frank, did it work for you? I tried to deactivate Stop Start but it doesn't work. The C_B_STOPSTARTInhibit value was already set to 1.

[@frankcellini9363]

@@meniost Did not work... But I did it another way.. I checked the signals on the back of the switch that activates/deactivates STOPSTART and designed a circuit that switches the button electrically that you would do manually. When engine starts after 1 minute my circuit checks that light is not active and if not it contacts the switch with relay on my circuit.

[@meniost]

@@frankcellini9363 I found the following procedure on a forum and it works!! Enable / Disable StartStop Function X98Ph2 - ClioIV Ph2 ECU name -> BCM/UCH -> T4_VS_BCM_DDT2000_SW16_5 Screens -> GEE -> GEE - Configuration Change value of E_B_STOPSTARTINHIBIT_CF to True And if you want to remove the sign from the dashboard, you can do the following Cluster X98_X87_X82 \ GENERAL CONFIGURATION - SCREEN 1 \ StopStartPresent_CF Change the value to "without something" in order to eliminate on the CdB messages related to S&S.

[@frankcellini9363]

@@meniost Good job... might give it a try... where did you get your DDT4ALL software from because it has to have the necessary database included

[@aarontan4430]

Hi! I have the the Kobra ODB2 with WiFi. I have loaded the ddt4all software on my Windows 10 notebook computer. I can connect to the ODB by WiFi and run the programme. I can select Megan IV Sedan (mine is sedan) and follow your steps. But when I try to double click the '... sailing_b4' then the software hangs and says 'not responding'. What do you think has gone wrong?

[@MicheleP]

hi, unfortunately that ECU is very "difficult" to read. probably your OBD is not fully compatible..try to buy the one i provided in the description, that is the only one FULLY compatible with Renault ECUs and DDT4ALL

[@aarontan4430]

Thank you! I'll try other ways

[@grubre.2174]

I tried doing this on my opel traffic but I don't see the batterygauge option.

[@MicheleP]

OPEL??

[@grubre.2174]

@@MicheleP yes, opel traffic.

[@AG-kx2up]

Hy,can i do the same on my Dacia Logan 0.9 Tce from 2019?

[@MicheleP]

Hi Angelo! yes, you can, just simply choose the Dacia Logan when you open DDT4ALL!

[@AG-kx2up]

@@MicheleP Thank you!

[@leonardmarcus7919]

Is working whit windows 7 ?, I need also to install a virtual machine? Becose I don't have a clue how to install a virtual machine on windows,in conclusion is working only whit windows 7 and DD4?

[@francesconardellilippolis867]

funziona anche con clio 4 2015?

[@SAVYCAR1992]

Salve, ma nel momento in cui imposti questo valore, il bottone del SeS smette di funzionare del tutto o premendolo si può riattivare lo SeS??

[@MicheleP]

nel momento in cui lo imposti è completamente disattivo, il pulsante non ha più funzione

[@SAVYCAR1992]

Ok, grazie della risposta!!

[@MoroboshiAtaru79]

Funziona su megane 3 2012?

[@jackyyang3427]

Hi, does it work in Megane RS, i mean do we have the Megane RS in ddt4all? Thank you.

[@MicheleP]

hi! yes it works! simply choose megane IV :)

[@vagpro2546]

@@MicheleP ddt4all have language english or french !!

[@MicheleP]

@@vagpro2546 yes but i'm italian ;)

[@killuaN95]

It can work with linux yea mac have problem with python but i tested in ubuntu it work

[@MicheleP]

Thanks for the info mate! I actually use it on a Mac with a virtual machine!

[@killuaN95]

​@@MichelePdo you use Bridge on your Mac Wireless NIC or you just plug another WIFI adapter !!

[@MicheleP]

I simply use the WiFi interface with the onboard WiFi of my mac

[@matteo150893]

Ciao Michele ! Innanzitutto complimenti per l inglese ! Ti invidio ahahaha , io ho una Megane sporter IV 1.5dci del 2016 con allestimento business navi R link , per quanto riguarda lo start and stop , la temperatura nel cluster dovrebbe funzionare lo stesso no ? Stasera provo con l iMac tu che programma usi come virtual machine per emulare windows ? Grazie in anticipo !

[@MicheleP]

ciao! si si dovrebbe funzionare lo stesso! basta che scegli la megane sw nel cluster scelta auto. io per emulare windows uso virtual box e mi trovo da dio, emulo windows 10 professional

[@matteo150893]

@@MicheleP intendi nella scelta del modello Megane IV sw ? Stasera provo ho installato anchio virtualbox con windows 10 Home 😉 grazie !

[@MicheleP]

@@matteo150893 yes! 👍🏻

[@matteo150893]

@@MicheleP grazie gentilissimo !

[@matteo150893]

Sono riuscito a fare tutto ! Start and stop , cinture , temperatura e sensori 😉😉 grazie mille !

[@TheMrJanez]

Hi, good chest! Tnx! Anything by engine upgrade? There should be back-up up to 10-20%

[@MicheleP]

engine upgrade? you mean a chip to add more power?

[@TheMrJanez]

@@MicheleP yes, something like that

[@patrykpekalski613]

Is this your new channel? all new movies will be here?

[@MicheleP]

Yes Mate! This is my new channel!

[@MicheleP]

I really don’t know why KZbin deleted my other channel! So I’m reuploading all videos here, plus many new ones!

[@patrykpekalski613]

@@MicheleP What will be the next movie r-sound activation or how to turn off Esp.

[@MicheleP]

I guess r-sound activation and RS welcome screen with RS sound! But now it’s Christmas time! Give me some days off 😉😉

[@patrykpekalski613]

@@MicheleP Merry Christmas😊

[@BzikuTOJEJO]

I must reset r link when im change?

[@MicheleP]

No, with this hack the reset is not necessary. But I suggest you to lock the car and leave it locked for a while, so all the ECUS go in sleep mode and once you unlock the car they will restart. 👍🏻

[@BzikuTOJEJO]

@@MicheleP I can't connect to the car: the port is not shining in red and yellow, everything works despite this I can't connect, what am I doing wrong? please help

[@MicheleP]

@@BzikuTOJEJO be sure to deeply insert the obd interface in the port. sometimes also mine doesn't work and the error is just that i didn't deeply plugged the interface to the port. it has do sound like a "click"

[@BzikuTOJEJO]

@@MicheleP ok works i clicked on wi fi and it didn't connect and i had to click on 1 icon this modem and everything works the system off, please more movies from megane

[@michelfarey6190]

Thank you

[@paolodrago806]

Ciao Michele potresti tradurlo in italiano per piacere?

[@BigBlockEntertainmentCanada]

2016 Smart 453 with out Start Stop Switch. Can I activate it with out the switch?

[@MicheleP]

You probably have to choose Renault Twingo, it shares many components with the Smart

[@taffypride1983]

Assume this is the same for the Twingo III/Smart ForFour?

[@MicheleP]

yep! you have to select the right car in the DDT4ALL interface

[@taffypride1983]

@@MicheleP ah ok. Reason I was asking is the modules don't seem to be named the same or have even the same options.....

[@MicheleP]

unfortunately sometimes modules and clusters have different name, depending on the vehicle type

[@legioner9]

I can not disable the engine sounds. All I have is Normal, Comfort and Sport, but no OFF option. Please help.

[@MicheleP]

Did you activated it via DDT?

[@legioner9]

@@MicheleP I did not. Today, at 1:30 PM, I am going to Renault for many problems. I will mention this problem also. I have a Megane 4 Sedan Intense with 140 bhp at it has many quality issues which generate many unpleasant noises inside the cabin.

[@peterr6761]

@@MicheleP Hello! I would also ask if it is possible to disable this engine sound feature completely with ddt4al?

[@MicheleP]

Yep, you have to disable the ESE (engine sound enhancement)

[@peterr6761]

@@MicheleP And where is this ESE in ddt4all? Cluster, bcm or whatever? Please help! :-)

[@vladiancu3821]

Esiste un altro modo x farlo senza che ti rimanga il simbolo accesso nel cruscotto

[@masc4144]

You can damage the Turbo, the alternator and the battery 🤣🤣🤣🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪

[@FixMain672]

Ma parla come mangi !

[@MicheleP]

se lo facessi solo in italiano tutti gli utenti esteri ne risulterebbero tagliati, che ne dici?

[@FixMain672]

@@MicheleP E' una tua scelta, ma esistono altre possibilità, ad esempio Davide Cironi parla in italiano e mette i sottotitoli in inglese e non mi sembra gli manchino visualizzazioni.

[@MicheleP]

Se paragoni me a davide Cironi sei proprio fuori strada. E sinceramente se non capisci l’inglese non è un problema mio, buona serata.

[@stasvikeshin7766]

Hello I have a question I had Megane 4 2018, I programmatically disabled the start stop now I bought a megane 4 2023 and the ecu does not respond to shutdown start stop commands and other data changes. after saving the changes, all parameters are returned to stock Maybe new models have some kind of protection?

[@Baptistonneau]

Yes, all Renault cars after 2020 block writing...