All parts needed and full build is in the video. Enjoy 🤙🏼 Music: Faded Musician: Not The King.👑
Пікірлер: 140
@RCRoads2 жыл бұрын
Nice work. Thanks for taking the time to show us how to make this conversion. I have been wanting to get a limitless but a stretched 6s Typhon might be a better choice. Again, Great Work! 👍
@rcdays25954 жыл бұрын
I don' know how you figured all that out but this is an amazing mod. Congrats 👍
@engelson49133 жыл бұрын
Hey man awesome build can somebody tell me what benefit do you get out of stretching your Typhon typhoon
@rcbustanut20573 жыл бұрын
Awesome bro!!.... Thanks for putting this up & also parts required. I have an Armma Typhon 6S and been wanting to do this mod so I can get a bigger motor in, for speed runs. Looks hot 🔥 👍
@kgrc00783 жыл бұрын
You’re welcome 🤙🏼🍻
@rcbustanut20572 жыл бұрын
@@kgrc0078 sooo, a yr later, finally got around to doing this mod lol 😄. Been too busy with the Limitless lol. But she came out pretty awesome. I wound up putting in a Castle XLX2 in her, I swapped the motor around to the front like the Limitless stock setup & made some custom side skirts instead of using the stock side walls to make room for an 8S setup. I also used a Limitless spool. For the motor, for now, I have a hobbywing 2200kv in it till I find a suitable TP motor. On 4S, running 34/34, she hit 89mph during her shakedown run. She'll be pushing 100mph + on 4S hopefully this weekend now that I finally dialed in her suspension. Thanks again for taking the time to post this 'how to' bro! 😎👍
@mrtambourineman61076 ай бұрын
Isn't that a Typhon 3s?? I dont think they do that colour body in a 6s vehicle 🤔
@kgrc00786 ай бұрын
That’s a 6s. Its the old 6s lol
@Johnnyeatsitall Жыл бұрын
Will the v5 kraton 6s chassis work?
@teslacybertruck7502 жыл бұрын
Some call it "truggified"
@MatrixRC3 жыл бұрын
I'm watching this 7 months later and great job. I have one question. The chassis you said was a Kraton 6s chassis. I cannot seem to find that design but I was able to find on Arrma's website the chassis you have matches the Arrma TALION 6S. Looks like they must have made some revisions since this video.
@kgrc00783 жыл бұрын
Go to Jennysrc.com For the chassis. Thanks for watching brother 🍻
@MatrixRC3 жыл бұрын
@@kgrc0078 thanks gotta love Jenny
@MrAntonio73ct3 жыл бұрын
Thanks brother. I just finished mine; truggified with v5 Kraton parts. Bash on.
@kgrc00783 жыл бұрын
Nice that sounds badass!!
@shaunoutndastix80222 жыл бұрын
Need to Run a MORE SLEEK n LOW WING..Sweet Mod Tho..💯💐☝👑🙏
@jasoncriswell67815 ай бұрын
I stretched mine with a Mojave chassis only difference to doing that than what this video shows is the center braces are 118mm in front and 120mm in rear Standoff length for the rear body posts is 100 mm
@earlmoorhead55554 жыл бұрын
Very cool looks sweet for sure 💯💯🔥🔥🔥🔥
@rccarsandmusic26416 ай бұрын
Excellent
@elementor1003 жыл бұрын
Awesome!!! I wish there was a KIT option so I can build it myself.
@keithwood36342 жыл бұрын
I can’t get to the parts list, too far down, can you update post so that is a newer post and I can see it? Thanks
@paulocadenas49963 жыл бұрын
How much $ do you spend.?
@gihonda1272 ай бұрын
10:59, what is the part number for those body extensions?
@swimpsmagbayao9513 Жыл бұрын
We're in it just be easier to put a Typhoon body on a kraton chasis
@GuyonaMoose3 жыл бұрын
Sick build dude! Thanks for the info I can’t wait to get my v5 typhon 6s
@paulrakis2 жыл бұрын
Nice video bro. How is the typhon holding up now ? I'm actually gonna build one too. Actually got the M2C super light weight chassis.
@Cannabis_Connoisseur4 жыл бұрын
Subbed. Really good quality video. Informative without being boring.
@kgrc00784 жыл бұрын
Thank you!!
@jamesrobinson49503 жыл бұрын
Definitely looks cool but is it a driving improvement or anything?
@kgrc00783 жыл бұрын
Way more stable at high speed
@geneumayam15493 жыл бұрын
What the dimensions for the set screws? Do you have a link? Thank you
@kgrc00783 жыл бұрын
Amainhobbies.com would have them 👍🏼
@jamesrobinson49503 жыл бұрын
Do you have a link for the rear body mount extensions
@kgrc00783 жыл бұрын
Go to amazon and search aluminum hex stand-off m3x55mm
@jamesrobinson49503 жыл бұрын
@@kgrc0078 found them, I appreciate that.👍
@kgrc00783 жыл бұрын
You’re welcome
@Hankster3602 жыл бұрын
Hey KG, great vid man. Loved it. I do have a question for you. What do you suggest I have a Kraton I would like to convert to a Typhon but I don't know how to install the front mount on the kraton front end. Any ideas?
@nitrohead70Mats4 жыл бұрын
Thats a sweet rig look amazing👌🏆 great video👍✌
@oldgeezer64703 жыл бұрын
will the Kraton EXB brace and exb chassis work?
@kgrc00783 жыл бұрын
Yes they work 👍🏼
@ashfaqm36 Жыл бұрын
Excellent video 👍👍👍
@jeffreybanks15546 ай бұрын
What is the part number or description of the extension used for the rear body mounts
@jeffreybanks15546 ай бұрын
The rear brace is that from the Kraton
@gedeonrf3 жыл бұрын
Greetings, I damaged my Original chassis and I want to upgrade to this one. If you have the links for the parts, I will thank you. and exelent Video.
@BajanFishPrickers Жыл бұрын
Hi can you do this with the v2
@Northside910 Жыл бұрын
good job on the build. did that battery tray come with your typhon? I need a battery try just like it for my typhon.
@marinemike94984 жыл бұрын
Awesome look all stretched out! Consider doing time lapse on your build/mod vids. Be interesting to watch you work.
@kgrc00784 жыл бұрын
Alright I’ll try that next 👍🏼
@SLIMMN19752 жыл бұрын
Hey there, is your Typhon a V4 or V5?
@kgrc00782 жыл бұрын
4
@antonioviernes25003 жыл бұрын
Where you buy the chassis upgrade? Thanks
@kgrc00783 жыл бұрын
JennysRC
@CoachD3864 жыл бұрын
Nice info on this rig, 💪🏾💯🚀🔥
@Murphys_Law97 ай бұрын
Can it still bash or this is just for speed running
@kgrc00787 ай бұрын
Just speed runs. Shocks are too stiff at this point
@lavelltaylor21973 жыл бұрын
is this just a speed car or can it be bashed
@kgrc00783 жыл бұрын
After it’s stretched it would be more for speed. Because the shocks would be too stiff and it’ll be low to the ground
@ameriab34042 жыл бұрын
Upload more videos
@gamebosan59653 жыл бұрын
Look greet
@jadeddragon4254 Жыл бұрын
This is something I would totally expect to see out in Vegas
@blaketundra32162 жыл бұрын
Sick
@leonnguyen21252 жыл бұрын
What batteries you use to fit underneath the body please?
@kgrc00782 жыл бұрын
Just a regular 4 or 6s lipo
@leonnguyen21252 жыл бұрын
@@kgrc0078 I am using the Cnhl 6s but the body hit a little bit still. So weird.
@stevemdelacruz56023 жыл бұрын
Know how u feel...lost a battery that i was waiting for .
@rc.terminator4 жыл бұрын
Good info my friend
@vasilisfellouzis2 жыл бұрын
Dose the kraton front brace fit the typhoon as well?
@abgarza9113 жыл бұрын
Can you list the parts you use to stretch it?
@kgrc00783 жыл бұрын
They’re all mentioned in the first part of the video
@rclife97253 жыл бұрын
All I need again is the back dog bone and chassis brace and the kraton chassis
@dsrinbermudes75943 жыл бұрын
Can you do that to the 3s version
@kgrc00783 жыл бұрын
No you cannot unfortunately
@Rocketfpv4 жыл бұрын
Great video 👌
@UDRC854 жыл бұрын
Great vid. Great info.
@Trystan46 Жыл бұрын
Where did you get the front shocks from ?
@Trystan462 жыл бұрын
Where did you get the chassis and bits from ?
@kgrc00782 жыл бұрын
Jennysrc.com
@Trystan462 жыл бұрын
@@kgrc0078 looked everywhere for the m3 55 mm body posts , when did you purchase them ? Think their discontinued 🤦♂️
@rclife97253 жыл бұрын
Lol I did it once 😅 wife toothbrush
@CmwSpeedrunUk4 жыл бұрын
This was a brilliant video 👍🏽
@kgrc00784 жыл бұрын
Thank you!!
@mrmontgomery5263 жыл бұрын
M3x 55 ? Are the rods? Or what are called exactly?
@kgrc00783 жыл бұрын
Aluminum standoff. Size m3 x 55mm
@mrmontgomery5263 жыл бұрын
@@kgrc0078 perfect thank you sir
@mrmontgomery5263 жыл бұрын
@@kgrc0078 oh also what type screw did you use to go into the body mount?
@rclife97253 жыл бұрын
I already bought her one before I did it
@billy36503 жыл бұрын
That won't work on the Typhon mega ?
@kgrc00783 жыл бұрын
Nope. Because you need the kraton 6S chassis and it won’t fit. Unfortunately you cannot stretch the mega or the 3s
@kgrc00783 жыл бұрын
I’ll try to make it happen
@stogierc12772 жыл бұрын
Easier to put short arms on a Kraton
@2XRC4 жыл бұрын
awesome !! good luck at the race !!
@kgrc00784 жыл бұрын
Thank you 🤙🏼
@dukercuk3 жыл бұрын
What about kraton 8s chassis will it work 🤞🤔
@joshchatwin81793 жыл бұрын
What chassis is that
@kgrc00783 жыл бұрын
Kraton v4
@Streetzaholic3 жыл бұрын
You want to sell this ?? I’m in love lol
@kgrc00783 жыл бұрын
I actually am. No luck yet
@Streetzaholic3 жыл бұрын
@@kgrc0078 how much ?? I really like what you did ..
@Streetzaholic3 жыл бұрын
@@kgrc0078 I’m interested.. lmk ASAP b4 I go buy one lol
@cbj2233 жыл бұрын
Is the Kraton Chassis V4?
@kgrc00783 жыл бұрын
Yes v4 chassis
@cbj2233 жыл бұрын
@@kgrc0078 great, thank you
@capikfx46824 жыл бұрын
Hi bro .. Where it u buy this item ? Tq
@rclife97253 жыл бұрын
So one more run through
@birminghamgtrc3 жыл бұрын
nice video bruv. im just about to do mine in next few days.
@allencrooms8242 жыл бұрын
That car is cool
@dennispangilinan65753 жыл бұрын
what are your tires and their specs?
@donaldbarron79164 жыл бұрын
Straight up !! Awesome 👌
@dynasty48514 жыл бұрын
Dag. You make this look easy. Thanks for sharing. I'm going to do this too. Subscribed.
@kgrc00784 жыл бұрын
Thanks! I’ll sub back later brother 🍻
@dynasty48514 жыл бұрын
@@kgrc0078 Does the shocks matter if it's the rear limitless shocks?
@kgrc00784 жыл бұрын
I actually haven’t tried the rear shocks 🤔
@dynasty48514 жыл бұрын
@@kgrc0078 dag. Those are the only ones I can find that is assembled on ebay. Amains have it, but it cost 25 bucks more and have to assemble it.
@kgrc00784 жыл бұрын
Try jennysrc.com
@stevenhearnden6103 Жыл бұрын
Why?
@kgrc0078 Жыл бұрын
Just a different option. Also for those who like to drag race 1/8 scale
@radiocontrolcardevelopment73292 жыл бұрын
It looks sick
@jpyt71823 жыл бұрын
Get the F1 kit on that
@phillybrc3 жыл бұрын
DEADLY
@deaf.dumb.blinded4 жыл бұрын
Can you stretch a 3s typhon?
@kgrc00784 жыл бұрын
Nope.
@kgrc00784 жыл бұрын
But you can widen it with the kraton/outcast 4s arms and driveshaft 👍🏼
@deaf.dumb.blinded4 жыл бұрын
@@kgrc0078 ah thats a shame!
@kgrc00784 жыл бұрын
I know man
@tbnice99994 жыл бұрын
🤣😂 awesome
@joshchatwin81793 жыл бұрын
M3 by 50mm what are the called
@kgrc00783 жыл бұрын
Hex aluminum standoff
@nosolja93 жыл бұрын
Looks amazing!!!
@mrmontgomery5263 жыл бұрын
I love when I did an extension on my typhon but had a bad crash and bent the chassis so I just went back to the original chassis think I’m going to do another typhon stretch ,have a question where did you order the pack of extension rods from?