Stretching a Honda Ruckus tire onto a 12X8 inch wheel.

[@Cwis901]

Motonosity needs to watch this video

[@switchjv]

I agree.

[@manuelriemens3366]

Rebel Rider - Chris he did

[@alienfac32]

The thing i noticed is that he had the wheel the otherway around. where Switchjv had turned the wheel becasue of the gab.

[@FederalBikes1]

5:59 compressor kicks on, he jumps

[@andriex2113]

Erik Turner i think same here 😂😂😂

[@joannebribleck7963]

Well considering what he's doing I can't blame him for being jumpy.

[@lelouchlamperouge4273]

The last 5 seconds was a perfect summary 👌.

[@lenliz2003]

So just to add to this. I use to have235x35x12. I had to pump them to about34psi just to be able to turn easier because they flat tires. I just removed the front tire and installed a 140x70x12. Can't wait to try it out. Then I will do the back wheel.

[@HumbledGod]

fucking savage dude no bead locker too hahaha

[@SnowyParadoxx]

That jump at 5:58,lol

[@jbamerican_usnavy]

They don't make 12x8 tires for 12 x8 rim?

[@petebusch9069]

I don't get it, the edge of the rim is sticking out so what is the point of doing this?

[@icuDOucME2]

First of all, you made that look easy. Secondly, I'm curious as to why you didn't use a 7 inch rim instead of the 8 to try and minimize the amount of rim protrusion? I'm thinking about doing my own Ruckus build and just trying to understand what I'm seeing in all these custom Ruckus videos.

[@switchjv]

after the wheel is mounted on the hub, the protrusion of it is not as much as you would think. also, when mounting the wheel, I'm not sure of the clearances. sometimes , as in my other build there was only about a 1/16" clearance from tire to oil filler orifice. the wider wheel allows the tire to flatten more when mounted giving the wheel more clearance.

[@icuDOucME2]

Understood. Thank you. BTW, it does look pretty cool

[@lenliz2003]

Could you share a.link in where to buy this tire pls

[@switchjv]

www.ebay.com/itm/374238300241?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=X781dcH9T3m&sssrc=2349624&ssuid=VF11ICIGSTG&var=&widget_ver=artemis&media=COPY

[@psychouki]

Why you jumpin bro?? That compressor scare ya??😅

[@garyjohnson1970]

Why don't the tire companies just make a low profile wide tire that actually fits the rim???

[@davidguzzi3315]

Because there's not a big enough crowd of people doing this for tire companies to make any money to create and sell tires for this market is what a tire shop owner told me, I asked the same question!

[@noemanzo4831]

Whats the name of those wheels? Im new to this. Building my first ruckus

[@switchjv]

Noe Manzo they're made by machined machines. They ccw wheels.

[@changcarlos]

hello my friend congrats for the video one question i wanna put 10x7 on my yamaha axis 90. i think 130 90 10 its a good size to strech tires.. what you think . thsbks in advance

[@switchjv]

I've worked only with 12" wheels. Never with 10". I looked at photos of the 10x7 and only could find 205 50 10 wheel and tire combos. After looking at the 130 90 10, it would be really hard trying to get the tire to stretch and seat. Not to say it can't be done. It would just be really hard.

[@changcarlos]

@@switchjv ok my friend i will try it and post it.. thanks for you reply

[@changcarlos]

@@switchjv my friend i did it 10x7 fatty wheels check my videos thanks

[@switchjv]

@@changcarlos awesome!! Looks good

[@nasercea]

i have one on my scooter.. stretched tire and was using it for 4 years up to now.. no problem at all

[@lenliz2003]

How much should the riding pressure be?

[@switchjv]

Usually the operating tire pressure is labeled on the sidewall of the tire.

[@tobysuttles9559]

Hey I got a 12x8 rim and Michelin tires is a 130/ 70 x 12 will this work on the rim? Just curious what is your tire that you used in this video on the 12 x 8 rim?

[@switchjv]

+Ben Suttles I used a 140/70-12 tire on a 12X8 wheel. I believe the 130/70-12 is a low profile tire, it doesn't have enough sidewall to stretch the tire on to the wheel.

[@davidguzzi3315]

Most tires you see on KZbin on ruckus and maddogs rounded are all 130/70×12's mounted on 12×8 rims, blasted the same way!

[@davidguzzi3315]

I think that 140 looks better though!

[@gimzgomez5195]

what size is your front rims and tires?

[@efraindelariva9368]

Will it fix my 1994 mazda it have 4 pulg i want to know where you buy at it online?

[@switchjv]

I dont know exactly what your application is, but here is the link. m.ebay.com/itm/5-10-Gallon-Air-Tire-Bead-Seater-Blaster-Tool-Seating-Inflator-Truck-ATV/153151493389?var=&hash=item23a88a550d

[@nikithsylvester]

Sir is that an 12 inch wheel ?

[@switchjv]

Nikith Sylvester yes, it's a 12 inch by 8 inch wheel.

[@nikithsylvester]

Wat is the pcd?

[@switchjv]

Nikith Sylvester i don't know what that is? please explain.

[@nikithsylvester]

switchjv pitch circle diameter of the four holes which fits the car

[@nikithsylvester]

switchjv how much price for the rims ?

[@OldAndGettingOlder]

How do you even get the tire on the wheel?

[@switchjv]

Stanton Taylor use a couple of tire mounting tools from harbor freight. lots of soapy water. It's just like manually mounting a car tire.

[@drivermike9494]

You ordered the wrong tires? 😂

[@gimzgomez5195]

what did u put on the rear wheel lug size?

[@switchjv]

I drilled and re-threaded the hub for larger studs and used M12x1.5 lug nuts.

[@THAYTAODAYLAIOTO]

58 / 5000 Kết quả dịch How many parameters of that tire and wheel, man, thank you very much

[@switchjv]

Tire= 140/70-12 Wheel= 12"×8"

[@czxzack]

If 13x6j wheel can fix what size tires?

[@switchjv]

I've never used a 13 inch wheel before. Mine have always been 12 inch wheels. So I dont know what tire will work on a 13 Inch wheel.

[@chris72489]

Is that a Kendra tire?

[@switchjv]

Yes it is.

[@popawheelie2431]

motonosity sent me here

[@NovemberMoore]

Watch them fingers !!

[@switchjv]

November Moore yrah, I hear you. I've seen a guy get his fingers caught in a tire when the bead set. Not good.

[@jay_tarantula899]

Entire vid could be 1min.

[@switchjv]

Have at it then.

[@jdub_bkv6598]

How do you calculate tire size per rim for stretch?

[@switchjv]

I didn't have to calculate the dimensions. Depending on the profile that you're looking for, there's only a handful of tires to choose from. I went with a tire that I had already used before. There is another tire that has a lower profile, but it's a pain to seat it correctly.

[@jonathanalvarado1743]

@@switchjv can I put those tires on a tip banshee rim

[@jonathanalvarado1743]

@@switchjv and what’s the size of that tire

[@switchjv]

@@jonathanalvarado1743 i used a 140 70 12 kenda tire for my wheel. I mounted a lower profile tire once for someone and it was very hard to seat. But, i know it can be done. The way i figured out what look i wanted, was to look at other builds and see what they were using. Definitely need a bead blaster to mount the tires though.

[@70NastyLac]

what kind of wheel is that?

[@switchjv]

its a 12X8 inch wheel made by Machined Machines.

[@miguelserrano26]

tengo una goma 140/70/13 y se le puede montar a un aro 12 de esa manera.....help please

[@switchjv]

no, you need a 12" tire in order to mount it on a 12" rim. it wont fit.

[@miguelserrano26]

thanks bro

[@isaiah6423]

how can i buy like that?

[@switchjv]

norky ravina you can purchase them mounted already from dorbyworks.

[@toncizaller4944]

its a cheeta blaster

[@chriscybulski3579]

Whats the tire width ?

[@switchjv]

the tire size is a 140/70-12. it was stretched to fit an 8 inch wide wheel.

[@brettdavis330]

what tire size fit on 12x7 wheel?

[@switchjv]

Brett Davis the 140/70-12 should fit a 7"wide wheel.

[@brettdavis330]

ok thanks,I'm learning here about this fatty stuff,cuz I'm plain to put a fatty on my chuckus

[@switchjv]

No problem. Glad to help.

[@georgealmeida3163]

its called a beadblaster.

[@switchjv]

George Almeida ok. Thanks

[@lestermiller2717]

Do you realize the rim is way to big for the tire you should have one 2” narrower

[@switchjv]

You're completely missing the point of having a low profile "stretched" tire. You might look up other configurations on other vehicles.

[@Alex-oc8hk]

que tipo de rin nesesito

[@switchjv]

its a 12"X8" machines machines wheel.

[@domking4061]

can you watch cambodia big wheel zoomer x please?

[@smurfsocks6215]

What PSI do you fill the Cheetah to?

[@switchjv]

it was filled to 100psi

[@smurfsocks6215]

switchjv thanks! You're video is great btw. I think Motonosity said to check it out.

[@วัฒนพงษ์บุญเเสวง-ฬ9น]

เเม็กเเบบนี้ซื้อได้ที่ไหน

[@dfishing3131]

Motonosity

[@giancarlorodriguez6665]

delaware fishing 31 motonosity

[@scooterboy304]

sexy ass rim bro.where did you get it from.

[@switchjv]

It's a CCW2 12X8 wheel with the perimeter bolts from Machined Machines.

[@treborcosmico9547]

que brutal

[@kassiedreaneai7459]

Having tyres of incorrect size like this fitted to rims too wide for the tyre is a very dangerous practice. Even worse is the fact that so many scooters with these sort of tyre/rim combos have exposed rim edges at the side leading to situations where on damaged roads or road edges edges a person might suddenly be running on the rim edge not the tyre. It might look cool to those who have them but the tyre was not designed for safe use in this manner. The sidewalls do not have the damage resistance not rubber grip quality that is built over the normal tread area.The most common use of this I have seen is on the Ruckus and I admire the bike and the passion of those who ride and modify them, but better to convince manufacturers to design tyres for your need than force them this far out of intended design/use shape.

[@switchjv]

+Kassie Dreaneai thanks for the input.

[@redneckhippiefreak]

+Kassie Dreaneai well they don't make round profile tires 255mm wide. So we stretch them to fit. Find us some round profile, 225 55 10s and we will be happy to use them..lol

[@kassiedreaneai7459]

+redneckhippiefreak I well understand the frustration of no supply to suit the needs of what is a growing trend. Scooter modifications. As I said earlier the scooters look good and a lot of time, money and effort goes into modifying them. But this particular tyre stretching modification will not be backed by the tyre dealer and gives any insurance company a reason to wipe any insurance claim in the event no matter how rare or unlikely you expect it might be of an accident. The sidewalls are thinner than the tread area and exposed to puncture risk and the exposed rim edges may make ground contact in the event of the tyre dropping off a flat surface like broken road edges or potholes. (we have some big ones here). Surely with so many people in a number of countries owning and modifying the Ruckus and I suspect a few clubs must exist, then some sort of tyre dealership contact should be made to get them to make tyres to meet your needs. Clubs could almost certainly collectively assure the manufacturers of a number of sales to justify making suitable tyres. (I have known of some manufacturers listening to clubs requests.) Anyhow.... happy rucking all.

[@redneckhippiefreak]

Kassie Dreaneai Bla Bla Long explanations of the risks of riding on a modified vehicle to a group of animals that risks death on the day to day by simply riding the stock vehicle. lol So can you find us tires or are you just here to preach like a lawyer? XD

[@Tyler_Mayhem]

You're a fucken knob. That person was being helpful as fuck and you respond like a 10 year old.

[@trellcarter5125]

he copying motonosity

[@singlemalt1972]

Yep, he went back in time to February after seeing Motonosity's build and uploaded this .....

[@switchjv]

The design for this ruckus came from several builders. I looked up his videos after you posted this, however I didn't use any ideas from his build.

[@jake636]

Trell Carter you do realize motonosity used this after him, he even said he got it from here.