Stripping my 1980 C30 Dulley for parts

[@87SSBOI]

Robbing Peter to pay Paul!!! Love it!! You making good off that donor truck

[@CowboyMuse405]

Yes sir you do family all day sir 💪🏾🤠👍🏾💯

[@builtonabudget6767]

Thanks! I appreciate the support.

[@billywhite3020]

My friend I need some parts for a big block chevy power steering pump and everything to put it on the motor and my

[@jginnovationgaragellc]

And the suspension as well makes a camper special , use badges it’s your truck !

[@Flexluciano114]

You got the right plan Built! I did the same thing with my 4 door cutlass at 1 time! I actually had 5 cars to build 2!

[@builtonabudget6767]

Thanks for your interest and support

[@williesweetjr8713]

Boom Mat and Dynamat are good but pricey. I used Frostking duct insulation from Lowes, applied to floor, inside the outer door skin, the inner door frame, inside the plastic door panel and behind rear seat. Super quiet insideno compared to when I bought the truck. Temu sells a similar thermal acoustic material that is even less. The trick to adhesion was to clean the surface throughly, final step with acetone or alcohol and use small roller to press in place. Merry Christmas to all!

[@builtonabudget6767]

Great information, thanks!

[@builtonabudget6767]

The c30 is the real rusty one. The r30 is good except on the drivers corner. I think that i can cut that from the c30. In my next video, i will show that. You really be watching. Thanks, that inspired me

[@JoesClassicGarage]

Looks like you were blessed with a parts truck that has just what you need. I would use everything on the 87 and not be concerned about it being (correct). I would even find a way to put those good bumpers on there with the 87 front end. I would ride those seats just like they are; fine seats yes sir.

[@builtonabudget6767]

I will be using everything from the parts truck I can. Thanks

[@billywhite3020]

If it's not been changed it's got a Dana 70 in keep that Dana 70

[@KevinRichards-my5oj]

1980 was the first year for square shape headlights on Chevy & GMC fullsize pickups & SUVs, & was also the last year for round shape headlights. The square shape headlights came standard on models with the Silverado & Sierra Classic trim levels & optional on models with the other trim levels. 1980 was also the last year for the nose on the front, bodyside molding trim, emblems, & interior with those designs, & outside hood release.

[@builtonabudget6767]

@@KevinRichards-my5oj That's some good information. That's why I like the comment section. Thank you for sharing.

[@KevinRichards-my5oj]

@builtonabudget6767 those generation GMC & Chevy fullsize pickups, SUVs, & medium duty series models which are the bigger size trucks with the same cab design but with a smaller size rear window were produced from 1973 - 1991 except the plain cab pickups "half ton & three quarter ton models only" were finished in 1987, & the one ton plain cab pickups & plain cab medium duty series models were finished in 1989. 1989 was also the last year for three quarter ton crew cab pickups. Believe it or not, the medium duty series models with school bus bodies weren't produced until 1985 because buses with the previous 1967 - 1972 nose design on the front were still in production up through 1984. SUVs, one ton crew cab pickups, & medium duty series models with bus bodies were the only models that were in production up through 1991.

[@KevinRichards-my5oj]

@@builtonabudget6767 1973 was also the first year for the crew cab pickups.

[@KevinRichards-my5oj]

​@@builtonabudget6767also that C30 is actually a C35 because it's a GMC. Although Chevy C30s & GMC C35s are the same, but just different names. 1980 was the last year for the C & K 15, 25, & 35 models. In 1981, the GMC series names were changed to C & K 1500, 2500, & 3500. Chevy's series names on the other hand stayed the same.

[@CowboyMuse405]

Yes sir 💪🏾🤠👍🏾💯🥃

[@michaellane8294]

Merry Christmas to you and family many Blessings Built on a Budget.🙏😎

[@builtonabudget6767]

Thanks. Merry Christmas to you and your family too.

[@RodneyTurner-l7u]

Looking good 👍

[@builtonabudget6767]

Thanks for watching!

[@BrandonDeon-uz7ty]

Happy Holidays 👍🏾👍🏾💯

[@builtonabudget6767]

Happy Holidays to you too.

[@darrylblackburn6616]

Can’t wait to see it done will look good

[@builtonabudget6767]

Thanks, more to come stay tuned

[@jermainesmith4788]

I have a 3/4 ton camper special. I know it have 4.10 gears in a 14 bolt rearend. I plan on upgrading to a rv/tow cam soon.

[@builtonabudget6767]

Thanks for the info, I'll keep that in mind when I get to the rear end!

[@edwinstrickland1298]

Thanks!

[@builtonabudget6767]

Thank you for the super thanks. Merry Christmas

[@OleManStillAtIt]

Looking good brother You are getting me inspired to start some of my projects Am redoing my little garage right now so I can work New roof , wiring are already done and working right now on a deep cleaning before I pull a truck in Thank you and Merry Christmas to you and your family

[@builtonabudget6767]

Thanks! Glad I could help inspire you!

[@billywhite3020]

You got it going on

[@jamesp1586]

Merry Christmas Built on a budget and happy new year. Love the truck and content

[@builtonabudget6767]

Merry Christmas and Happy New Year to you too! Thanks for watching.

[@HydroRat]

Built working hard out in the cold! Much respect. Those C-30 seats definitely look better. If not too worn, would it be worth trying to clean them first to see how they turn out? Might save time & $.

[@builtonabudget6767]

That's the plan. It's always good to hear from you. I appreciate your support.

[@davidsumner5053]

Merry Christmas

[@skatepunk6894]

I like the mirrors use them for now

[@builtonabudget6767]

I'm on the fence about that. I have a little time yet. I always appreciate the time you take to comment. It keeps me moving forward

[@bigjohn_68C10]

If it were me, and you like the 87 front end, put the 87 clip on the good cab. It'll save you a lot of time and money cutting the metal and swapping everything over. This is just my opinion. Oh and I'd call her Big Bertha. This is your boy from KY sayin.... PEACE!!!!

[@builtonabudget6767]

The 87 front is already on the good cab. The parts truck (1980) is only good for the drive train

[@jginnovationgaragellc]

Whatever set of rear fender flare you’re not going to use Let me get other other set Looking good 🎉

[@builtonabudget6767]

Thanks, I might keep those for the next project.

[@Chevy2856]

Hey BOAB your 87 will have a 3:42,373,410 more than likely it's 373oe410 being it's a3+3, the 80 came with 456,410 , if was me I wouldn't want anything less than a 373 gear

[@builtonabudget6767]

The 87 has 410s when I ran the vin on the 80 l thought it stated 342. I need to check tag. Thanks for info

[@RodneyTurner-l7u]

Make viedo of your ford f350 dually looks nice god bless budget

[@builtonabudget6767]

Thanks. I'll add that to my list.

[@TateReggie]

The lower windshield frame is rusty on your R30. Is the lower windshield frame on your C30 solid enough to cut out and weld onto your R30?

[@builtonabudget6767]

The c30 is bad. The r30 need to be repaired on the lower left outside edge

[@reginaldshoulders8301]

Built on a Budget, got a name for your truck. Since you are getting parts from another truck to built “ Split Decision “? That’s the name, Split Decision!

[@reginaldshoulders8301]

Sorry, I didn’t even look to see if anyone else came up with the same name. If someone did I apologize.

[@JesseHughley]

What’s going on with JT ?

[@builtonabudget6767]

On the back burner for now. I don't want to make the wrong move with him just yet.

[@gregfrazier9656]

That's alot of sheet metaling,but it can be done

[@builtonabudget6767]

I've done worse. It will go fast when I actually start.

[@RedEyedPatriot]

BOAB you know anybody gotta 99to06 Silverado 2500HD for sale your way.

[@builtonabudget6767]

Not off hand. We gotta get you in something else soon my friend

[@Alston_daily]

Name it budget special