Рет қаралды 270,485
How to make a # Build an extension to the house for a shower and toilet with your own hands. Wooden extension to the house in the village. Frame extension to a house in the Leningrad region. An extension in the Moscow region. 8 951 646 59 45 Ivan. We are building an extension to the house. How to make an extension to a wooden and other houses with your own hands inexpensive: step-by-step instructions from the foundation to the roof In St. Petersburg, Leningrad region and in Moscow and the Moscow region.
Installation of screw piles • Деревянная пристройка ...
#extension #veranda #with your own hands
Not so long ago, it was believed that the amenities in the courtyard of the dacha are a normal phenomenon. But today I want to live in comfortable conditions not only in my apartment, but also in a country house. That's why we decided to build a frame extension, and equip a shower and toilet there.
The shower room at the dacha turned out to be no worse than in a city apartment
The water on our site is only from the summer water supply, so the time of our stay at the dacha lasts from May until the first frosts in October. In spring and autumn, we use electric convectors to create a comfortable temperature.
We did not plan to build a heating system, build a furnace, and arrange a water intake source, as well as use the dacha for year-round living. Under the circumstances, the idea of adding a bathroom seemed to us quite good. And for the organization of draining of drains, we purchased a sewage station.
Construction of the extension
Plumbing equipment was placed along the entire extension parallel to the wall of the house adjacent to it. Part of the wall extends beyond the main building, a small window was installed in it at a height of about two meters, which we use to ventilate the shower. In sunny weather, the light coming from the window is quite enough.
The dimensions of the premises were planned so that it was comfortable to use them. The entrance to the shower room is from the annex, and to the toilet room-from the vestibule (Fig. 1). So that the entrance door does not block the vestibule, they made it extendable. This solution made it possible to increase the area of the shower by reducing the distance between it and the toilet, and make this opening smaller than the width of the door.
Fig. 1. Diagram of the extension for the shower and toilet
The extension was built using frame technology, and the walls of the sanitary facilities were similarly executed (photo 1). At the same time, the thickness of the insulation of the internal walls is 5 cm, and the external ones facing the street are 10 cm. Stone wool was used as a heat insulator, which also serves as sound insulation in the construction of internal walls (photo 2).
From the inside, the walls were sheathed with clapboard and covered with transparent azure. The floor of the extension was also insulated with cotton wool, but already in three layers. As a rough floor, an unstressed board "fifty" was used. The surface was treated several times with an antiseptic, well dried and painted. The coating turned out to be rough, but taking into account the subsequent laying of tiles, this turned out to be a plus.
Interior decoration
The walls of the sanitary facilities were also tiled. It was already necessary to put it on drywall, so this work did not require much effort and time. But with the installation of tiles on the floor, I had to tinker.
Photo 1. The frame of the internal walls was assembled from bars with a cross section of 40x50 mm. The room was decorated with sheets of moisture-resistant drywall. Photo 2. The walls facing the street were insulated with two layers of stone wool. Photo 3. The floor boards were reinforced with nails and wire.
We did not dare to lay it immediately on the boards, although they were prepared in advance. To strengthen the adhesion of the glue to the base, nails were stuffed into the boards and a wire was stretched between them. Nails with wide caps were not hammered to the end, so that the nail head protruded above the surface of the board by about half the thickness of the tile glue substrate (photo 3). It turned out to be a "reinforced base".
In the toilet, the tile was put in the classic direct way. The width of the toilet room (100 cm) was calculated in advance for finishing with tiles, so it did not have to be cut: three tiles of 33 cm each, plus seams and gaps near the wall (photo 4).
In the shower, the floor was lined diagonally (photo 5). This work required not only special care, but also the presence of a good tile cutter.
Photo 4.Toilet lining. Photo 5. Laying tiles in the shower
Installation of a shower tray
The enameled steel shower tray has always caused us distrust. For some reason, it seemed that he would bend under his feet. Therefore, the frame was built for it from the same"fifty". The upper part of the base was filed with an electric pipe, so that the sides of the plumbing could sit