As a software developer; watching welders critique welders feels very familiar.
@oliveryt71682 ай бұрын
Yeah.. I'd rather debug somebody else's spaghetti code.
@Dog-ct8hs2 ай бұрын
Software developers just copy each other’s code
@endurofan98542 ай бұрын
as a mechanic i also found these rather familiar 🤣🤣
@BonesCapone2 ай бұрын
"Your code looks like shit" "At least mine runs."
@mrpitonchik2 ай бұрын
Вас тут критиковал ChatGPT 😁
@divad232 ай бұрын
“Nobody hates welders more than other welders” - Sun Tzu
@user-gj5nw9vn3d2 ай бұрын
Lmao
@dgq47522 ай бұрын
😂😂😂😂
@alessandroio38462 ай бұрын
I think he was Lao Tse
@Carlogambino123812 ай бұрын
Lmao
@monratu88552 ай бұрын
😂 ahahahahah
@bondovwvw2 ай бұрын
As a JB welder I approve this repair
@thomasinefitzpatrickАй бұрын
XD
@caswelljohnstone200Ай бұрын
Underrated comment
@SolarMinerPH2 ай бұрын
this video just shows that no matter what you do in a welding video the other welders will find something/anything to criticize you
@tatkkyo99112 ай бұрын
But this one is good and makes sense
@udhi_gn38932 ай бұрын
Ironically, those expert keypad warrior even expect something from a light duty laser welding videos to bear a couple tons of load
@andrewgibson46582 ай бұрын
Depends what it's been used for! The welding is pretty good! Did it need the second pass? One pass either side would have been ok with a good weld!
@Roll_T1de2 ай бұрын
@@tatkkyo9911I mean, it really depends on what you’re using… with the correct penetration the first way is completely fine and can be stronger.
@anthonykinder40042 ай бұрын
@@tatkkyo9911tell me what about it makes sense? I don’t understand
@praisejeebus75442 ай бұрын
As an actual welder, this was actually a not terrible strategy. 10/10
@darkthought78602 ай бұрын
Not good tho right? Just not terrible? 😂
@r.g.bjaguar54522 ай бұрын
As another actual youtube commentator, he did not ask you to respond either@DontTouchMyTree
@Opraissuu2 ай бұрын
@DontTouchMyTree😐
@idk_what_to_do_with_my_life2 ай бұрын
@DontTouchMyTree😐👉🚪 Ratio this man
@soisaus5642 ай бұрын
@DontTouchMyTree worlds most creative and mature rage bait:
@elsensei5400Ай бұрын
As a professional Mexican since 1979, I can honestly say that watching these welders weld while eating tacos de carne asada and al pastor con limon, cebolla and cilantro topped with chunky super spicy red salsa and a cold coke is without a doubt the best way. Provecho
@Babbis2274Ай бұрын
Es de botella la coke? O de bolsa y popote?
@pombee7265Ай бұрын
Gpi 😦
@chrisvallianos8164Ай бұрын
What organization do I need to affiliate with to become a professional Mexican? Right now I’m a part timer.
@Bluextra.Ай бұрын
Read it with mexican accent from the beginning ngl
@celestinoprien3387Ай бұрын
Real Mexican would had a Modelo
@exa_chad2 ай бұрын
Algorithm decided that I should learn Welding 🗿
@playgroundchooserАй бұрын
Has it suggested cowbhoof trimming to you yet? That was a weird day.
@allancornell219124 күн бұрын
Yes to both yall
@FasterPATH2 ай бұрын
As a non-welder, I'm reading these comments and remaining a non-welder. #respect
@boogi36552 ай бұрын
😂😂😂
@BandaraWanninayaka2 ай бұрын
Ok 8 K@@boogi3655
@mtezman34652 ай бұрын
😅😅😅😅
@angelnoice72052 ай бұрын
Me
@LeeYang071332 ай бұрын
Same.. 😢
@ControlAllDa13372 ай бұрын
I was the top welder in the navy seals during my tour of Afghanistan with over 300 confirmed welds.
@NinjaSushi22 ай бұрын
Lol
@mircocrocop24342 ай бұрын
but one fine day, the true welders of this country decided to return. I tucked my tail between my legs and went to the airport, but there were no tickets and I had to leave the country with the landing gear of the plane down
@deckum232 ай бұрын
I actually knew someone when I was in the Navy that was a Nuclear welder, and was sent to Iraq to uparmor HMMWV's and he got to hand pick his team of welders, about as close to a Navy Seal welder I could think of.
@juliantabares47522 ай бұрын
And???????
@notchipotle2 ай бұрын
@@juliantabares4752and your brain is smoother than my forehead
@mostretardedawards2 ай бұрын
Impressive. Very nice. Let's see Paul Allen's weld.
@playgroundchooserАй бұрын
Underrated comment of the year candidate 😂😂😂😂
@MrSmaaronАй бұрын
It even has a watermark.
@prettynoose8497Ай бұрын
Try Getting A Reservation At Dorsia with that weld!
@davidroxsАй бұрын
Lmao
@rananomannoman101621 күн бұрын
😊@@prettynoose8497
@zekeh.72992 ай бұрын
as a welder for 312 years, I'm quite impressed
@VictorSai8 күн бұрын
😂
@HaakonAnderson2 ай бұрын
I have learned from welding videos that there is no way to weld anything correctly.
@EukalyptusBonBon2 ай бұрын
As actual welder with 14 years of experience, I approve this idea. However, I would still prefer to use duck tape instead of melting the metal. 👍
@rowea12 ай бұрын
I like duck tape and approve this message
@hallambastin33762 ай бұрын
I like ducks too.
@smokeybenj2 ай бұрын
I like messages and approve this duck.
@proyect0701092 ай бұрын
My name is Jeff
@Sirjohnwilliamuk2 ай бұрын
It's rainy tonight in UK
@the_drifter-bw9hj2 ай бұрын
As a welder for NASA I have over 87 years of experience and this looks fine. This is how we welded the Apollo 11.
@the_drifter-bw9hj2 ай бұрын
@@blessedman1959 true but I'm 107 now and dying, these hands can't weld no more
@Fredrick-jj9ok2 ай бұрын
A stage prop lunar module lol
@scheng9862 ай бұрын
As your assistant I have been welding in those 87 years and you were sitting in the office either reading how to weld or more recently watching KZbin on how to do it for 87 years.
@stephanbuma87122 ай бұрын
😂 I'm 205 now and I still got a rod in my hand
@timbocf762 ай бұрын
@@stephanbuma8712 that's what she said
@BrianEvans7662 ай бұрын
Welder here since 1909 and worked on the titanic, great welds.
@kaymike44442 ай бұрын
Is that you Brian? I welded the top deck of the titanic
@planetsongs_Ай бұрын
@@kaymike4444 YOOOO SUP BRIAN I WAS JAMES BUILDING THE EXTERIOR OF THE TITANIC I REMEMBER YOU
@RobertHenris-rr5vdАй бұрын
i was a riveter on the poop deck, but u start one lil fire and everyone comes down on u. im pretty sure they extinguished that fire right?
@levirobbins3808Ай бұрын
Bit excessive of them to use that much sea water to put out 1 fire!
@TheRetroCellarАй бұрын
Hey...I was the iceberg. Sorry about your boat, fellas. 😢
@lordbrain5263Ай бұрын
The reason he added the space was for better weld penetration, pretty good idea
@literal_f2210 күн бұрын
nice pfp
@exploreMauritius3 ай бұрын
According to my welding experience, only guys in the comment section know how to weld.
@eduardoscattone15973 ай бұрын
Un detalle erróneo en lo mostrado , deberá comenzar a soldar desde cada punta de varilla hasta el centro , luego digo : sin separar las piezas solo soldando de ambas caras será suficiente , inseparable , dónde comienzas a soldar acumula material ,dónde terminas la corrida del electrodo socava y en consecuencia debilita ese punto
@eduardomoreiragomes41733 ай бұрын
@@eduardoscattone1597concordo
@djbetogears3 ай бұрын
😂😂😂😂
@user-oh1bg2ie4t3 ай бұрын
Я сварщик если вас учат варить арматуру шлите нахрен , а если надо по технологии тогда дадут тех карту и спросят накс это у нас так в России 🇷🇺 все остальное мамкины инженеры 😂
@MrHeuvaladao3 ай бұрын
Specially, the russian guys
@gacl862 ай бұрын
I’ve welded since 1776 and I can tell you this is quality welding.
@exitorequesa4042 ай бұрын
el in mortal le decimos
@dontmind159Ай бұрын
Was Isaac Newton famous back then??
@rommelandamo6239Ай бұрын
You still alive (1776) ?
@loze1Ай бұрын
와개지리네ㅋㅋ너어케아직살아있냐
@r3alfishАй бұрын
Whoop pow@@loze1
@shawno9564Ай бұрын
As a Canadian welder, I can confirm this method was great for welding Igloos
@renwester72 ай бұрын
As a non welder, I have no idea the difference between the first way and the second way 😂
@ZokalexАй бұрын
Imo it's better because it penetrates all the way down
@graxtheswampgoblinarchmage5356Ай бұрын
The gap lets you deposit more weld, and you have access to more of the base material to arc onto, so the bond will be way stronger
@bird289Ай бұрын
@@graxtheswampgoblinarchmage5356 This answer is what I came here for, thanks.
@user-jj1rm3sx1mАй бұрын
Для арматуры вполне хватило бы первого варианта.... Если нужно прочнее переверни и провари с другой стороны...😂
@satelizergames2201Ай бұрын
Penetration
@yancyjfry2 ай бұрын
I only watch welding shorts for the comments.
@JG-pp3dd2 ай бұрын
Yes!! So entertaining
@WreckedftfoxyАй бұрын
damn
@kjoteАй бұрын
Indeed!
@2KJ-ng1ve16 сағат бұрын
I do the same and I know that this welder did a horrible job, but I have no idea why LOL
@genecrow53182 ай бұрын
Fyi, i wore my safety glasses while watching this.
@YTIB2 ай бұрын
@genecrow5318 OSHA approved comment
@cfaubs75162 ай бұрын
I should've read your comment before watching! 😵
@takesforever2 ай бұрын
Lol I'm dead scared looking at the spark even tho light aren't bright enough to burn my eyes 😂 serious ptsd on
@thesmokewagon63022 ай бұрын
😂😂❤
@JIHYEOGI2 ай бұрын
😂😂😂
@CarveyKeitelАй бұрын
As a professional J.B. Welder, what’s being done here is above my pay grade.
@DomTaylor.2 ай бұрын
Remember when phone camera's would crap out if you recorded videos like these. Technology
@JasonRosander-gu3qo3 ай бұрын
I wish they would flip these welds over afterwards so you could see what's happening on the bottom of the weld
@yurig.silvaalmeida12083 ай бұрын
Não tem a mínima penetração, pois estão trabalhando com a amperagem muito baixa, da pra ver pela fissura q ficou no começo da primeira solda, não formou a poça de fusão correta
@jeremyviromek2 ай бұрын
only nightmares on the other side
@tatkkyo99112 ай бұрын
If they ran it well it would be nice but if not gaps peaks and lots of crap. Though this is the best welding I've seen in you tube shorts as they actually followed some decent steps. They also didn't tack weld the whole thing
@KlausBarbi-qe6ix2 ай бұрын
Yes let's see the weld on the reverse
@Kenneth_the_Philosopher2 ай бұрын
@@yurig.silvaalmeida1208 Please explain in more detail!
@Mixa625682 ай бұрын
Если долго смотреть на сварку, то можно ослепнуть, а если ослепнуть то можно долго смотреть на сварку😂
@JIaem2 ай бұрын
парадокс русского языка подреплёный физикой😂
@anthonyraines59512 ай бұрын
That actually makes sense
@levharagezyan4596Ай бұрын
Это самый полезный комментарий под этим видео.
@loze1Ай бұрын
먼개소리야ㅋㅋ
@davidjosh5640Ай бұрын
The non-english comments really not on the same jokes 😂
@FTHarding2 ай бұрын
As a welder of 15 years, I'd say this is a solid process. I'd run second cap pass, or two stringer beads, as that right side looks like undercut. Then flip it over to get a full pen on the back side.
@stephenhepworth31132 ай бұрын
I only watch welding videos because i like the sound a welder makes when its speeded up.
@perfectmarnon2 ай бұрын
As a non welder who has watched alot of welding videos, i can confirm this is a weld.
@Trinidad_iz_TobagoАй бұрын
😂😂😂❤ Ты - лучший!!!
@billbarbour3351Ай бұрын
It's great to finally see a welding video where the "welder" actually runs a bead instead of doing a bunch of spot welds one beside another the length of what they're "welding".
@blood_reaper666Ай бұрын
You might need a special filter for your camera because recording bright lights regularly could damage it over time
@randyrussell62462 ай бұрын
I thought my fellow Carpenters were bad on their opinions but you Welders beat them like a drum !
@mpirokajosephmgcokoca23552 ай бұрын
Hahahahaha hahahahaha 😂
@sirflapfla972 ай бұрын
A welder's worst enemy is another welder
@geraldhuddleston14642 ай бұрын
Don't forget electricians,always second guess each other.
@trickym57482 ай бұрын
😂😂
@SG-dg6oi2 ай бұрын
HA where's the old union joke about carpenters knowing everything????
@stroys70612 ай бұрын
Q: Can’t we all just get along? A: Not when it comes to a welding video!
@rudez11252 ай бұрын
LMAOOO
@stuartsharples95202 ай бұрын
😂😂😅😂❤❤❤
@user-nk6je6wi1q2 ай бұрын
Арматуру вяжут друг мой .
@mcmpro40202 ай бұрын
Use
@johnharris81912 ай бұрын
"Welder my ass!!!"
@user-ui1wb3sm9pАй бұрын
я уже подумал что он её тоже зигзагом нарежет перед сваркой ))
@somutfaydalarpesinde3289Ай бұрын
Do we need welding goggles to watch this?
@user-bo6yk9he2g3 ай бұрын
Сварка и без зазора хорошо держать будет
@ulengaprak2 ай бұрын
Justru dengan adanya celah akan lebih baik.
@SergeySCA2 ай бұрын
@@ulengaprak Да неужели? И в каком стандарте это написано?
@viktorlukasevich48342 ай бұрын
Часто детей делают в пьяном виде , но дети дебилами рождаются !!!
@Morty4942 ай бұрын
@@SergeySCA У нас они разные😂
@Andrey_Konovalov.2 ай бұрын
@@SergeySCAГОСТ14098-2014, сварной шов С23-Рэ, зазор между стержнями меньше 0,05 диаметра арматуры, а это может быть и нулевой. Например, для 12 арматуры максимальный зазор 0,6мм, а не как в ролике примерно 3мм.
@darlingj.canela2 ай бұрын
As a former welder with a full week of experience, I can rely on this comment section.
@majorsingh7741Ай бұрын
Bro I suggests a dark filter lens for your camera health. you can use it while recording welding. ❤
@KaleKellerSaladАй бұрын
POV: you’re looking for that one negative welding comment
@stevek.19792 ай бұрын
There is no need to make a bigger gap, you already have a groove because the rebar is round.
@dericrimes31162 ай бұрын
Ummm... There was a red X...
@tedseb77262 ай бұрын
@@dericrimes3116lol
@motorbreath32 ай бұрын
Not to mention the buzzer .
@Angel-jy3zc2 ай бұрын
First idiot found
@PatD-632 ай бұрын
Did he wag his finger? If not, there’s still some room for doubt.
@user-th6xg3zh3m3 ай бұрын
Продавец электродов. "Я продам электродов в два раза больше"
@user-lv1yq5re7d3 ай бұрын
Где он перевел электрод
@user-th6xg3zh3m3 ай бұрын
Добрый день☀,. Перевëл,-это в смысле испортил?@@user-lv1yq5re7d
@user-pt8gt5uz6q3 ай бұрын
Ерундой страдают!😂😂😂😂😂
@user-by2rq5fv4j3 ай бұрын
Queda lo mismp
@user-wc3gz2ou4z2 ай бұрын
Тиктокеры намеренно моделируют сомнительного содержания контент, чтобы перфекционисты накидали побольше комментариев
@valalkuino31232 ай бұрын
I was a welder on Noah’s Ark back in the day and I can tell you that this weld is superb 🥴
@strongestzeninАй бұрын
I've been welding since 3000 BC and can confirm that he is doing an amazing job 👏
@user-do5lb2qw4d2 ай бұрын
Всегда в роликах про сварку иду в комменты .. Ибо читать сварочный срач одно удовольствие...😂
@Rammetallist2 ай бұрын
Русская ветка) Вопрос: а для чего нужно было увеличивать расстояние между деталями? Без этого сварка была бы менее качественной? и почему?
@user-fm2de1jf6kАй бұрын
@@Rammetallist. Металл пролился вовнутрь , все промежутки залил . Автор считает что это прочнее . Хотя как я варю мощность сильнее делаю , электрод не жалею , такой же провар .
@user-fm2de1jf6kАй бұрын
@@Rammetallist. Металл пролился вовнутрь , все промежутки залил . Автор считает что это прочнее . Хотя как я варю мощность сильнее делаю , электрод не жалею , такой же провар .
@_Goryny413 күн бұрын
@@user-fm2de1jf6kнет, металл пролился😂😂😂
@tomsurges79732 ай бұрын
I have been a welder since 1862, looks great!!!!
@yaretplay77492 ай бұрын
Very old
@Mr.Nobody_D2 ай бұрын
Outstanding transition to social media old timer.
@kevinperez.52 ай бұрын
Lol
@harrickvharrick39572 ай бұрын
So what makes the second method that adds some extra space between the parts better than the first? I really don't get it, I would think all it is gonna do is cause you to have to do some more welding?
@memobonito2 ай бұрын
My god! You are frekking dead!!! XD
@nikolabrazАй бұрын
Даже при просмотре видео глаза закрываю 😂
@AODReaper2 ай бұрын
As a burgerking employees for the past 80 years, i can assure everyone that this weld is correct although not perfect
@healthdios3 ай бұрын
I see a welding video, I jump to the comments section: NEVER GET DISAPPOINTED.
@VRAS45702 ай бұрын
So true, I do the same 😂
@ronaldnorris21792 ай бұрын
That holds true to most any videos.. there’s no shortage of “experts” on any subject.
@VRAS45702 ай бұрын
@@ronaldnorris2179 yeah, but welding is something different when it comes to that 🥳
@ronaldnorris21792 ай бұрын
@@VRAS4570 Ok.. proved my point.
@paulmercer49922 ай бұрын
lol 💯
@user-wy5wl1cc9c3 ай бұрын
Это арматура, у неё и так зазор нахрен ещё делать?
@user-pc9es9tl6l3 ай бұрын
Он решил кого-то удивить 😂
@user-cl6zr2bf9k3 ай бұрын
Я бы и варить с другой стороны от прихваток начал
@hersonvides26843 ай бұрын
Muy buena pregunta🤔
@slava08813 ай бұрын
Он задолбал со своими зазорами , вообще занятая должо быть нечем )))
@user-wy5wl1cc9c3 ай бұрын
@@slava0881 согласен
@navtektvАй бұрын
The lesson I take from this video is that no matter what type of weld you do, there will always be a welder who tells you that you're a fucking idiot for doing it.
@slipoftheknot88352 ай бұрын
Ive welded since 1776, did outstanding work 🎉😮
@jetaimemyls12 ай бұрын
Bro you’ve been welding for 248 years?😅
@user-vc3zd4ff5y2 ай бұрын
@@jetaimemyls1 Возможно бро вампир
@nobodyhoi51822 ай бұрын
Are you immortal by welding ??
@vidislime092 ай бұрын
Congratulation for surviving and still welding during american revolutionary war, napoleon war, third war and second war 🎉🎉🎉🥳🥳
@efeaster36802 ай бұрын
😂😂😂
@elcrackluisillo42802 ай бұрын
"Welders, assemble"
@johnharris81912 ай бұрын
For what? 1 crying at the time is all anybody can handle. LMAO
@zephstory59732 ай бұрын
Pretty good. Best one I’ve seen so far
@dfitterbweldn1238Ай бұрын
Finally a video like this where they actually know how to weld
@user-qq7jd4lf9w3 ай бұрын
Неувидел никакой разницы, что с проставкой, что без. Зазор и так конский. Вывод:совет говно
@Redfisherman0072 ай бұрын
All welders take a space for penetration on pipe.that penetration is Xray for perfection. Its not crap. On pipe. Lack of penetration is a repair
@user-tx6tg8fq2l2 ай бұрын
Полное говно совет, да. Повар будет и так, без вставок
@afreightdogslife2 ай бұрын
🤣🤣🤣👍🏻
@barher89302 ай бұрын
EL ESPACIADOR HACE LA RAÍZ POR LO QUE LA SOLDADURA PENETRA DE LADO A LADO..
@garyspooner28922 ай бұрын
I agree
@user-ns7hl9qc9uАй бұрын
You're going places, keep it up!
@kilesprofit891724 күн бұрын
ive been welding for 800 years now and i can tell you this is good weld. very strong
@George.Coleman3 ай бұрын
Rebar lives in concrete, just couple them together with wire
@twobuktwo8653 ай бұрын
Lives? Are you really that stupid? 😂
@me2bfc3 ай бұрын
Lap splices aren’t always strong enough.
@edmundooliver75842 ай бұрын
until a earth quake
@Khapamgaming2 ай бұрын
@@edmundooliver7584 in Chile we have earthquake proof houses and skyscrapers, the overlap is just much much longer than in the video without the weld. A 3 storie house have 2 of those bars one going from 1st to 2nd floor and the other from 2nd to 3rd floor, the second floor have double rebar basically so instead of being the weak point is the strongest, welding it would make it britte thus bad for witstanding tremors, it needs to be flexible but indestructible.
@Khapamgaming2 ай бұрын
@@edmundooliver7584 forgot to mention Japan and Chile work really close in anti earthquake tech since we are the 2 countries that are most affected by them in this planet, as soon as one find a new trick that one tells the other to develop it togetter.
@user-wm1sc6tl3c3 ай бұрын
At least this guy ran an actual bead instead of just tapping
@donsmith93533 ай бұрын
I thought the same thing!!
@yorselrus19963 ай бұрын
I totally agree when they do that stupid shit it's unbelievable
@user-dl4bx3xr8s2 ай бұрын
Идиотизм зачем ещё расширять зазор
@reactandgame72152 ай бұрын
I came to look for this comment😂 i saw the other video
@powslayer56322 ай бұрын
You mean tack welds?
@user-mq2bt2cy6d2 ай бұрын
Я не сварщик, а слесарь. И скажу что сварка арматуры не предусматривает тепловой звзор (чем является то что он сделал якобы правильно). Этот зазор предусмотрен для сваривания труб где будет проходить газ под большим давлением или жидкость так же под давлением. Такие зазоры не дают трубе отклонится (сварщики знают что шов уводит металл на себя).
@user-tm7fu7vo5r2 ай бұрын
На ванной сварке арматуры должен быть зазор и запил под углом, зазор делают не только на трубах, на любом толстом металле на котором будет нагрузка. Делают это для того чтобы провар был полноценный, так как не возможно большую толщину проварить в один проход, а то что металл тянет пол беды куда важнее чтобы сварка соответствовала требованиям по нагрузке иначе просто лопнет.
@user-tm7fu7vo5r2 ай бұрын
А на видео да, просто баловня. Если так заморачивался денег не заработаешь) а качество от этого не станет лучше) явно не в этом узле это нужно)
@yurikponomarioff2 ай бұрын
@@user-tm7fu7vo5rна чистую арматуру не может быть нагрузки, она всего лишь часть железобетонной конструкции, поэтому для связки достаточно даже поволоки, а если и использовать сварку, то достаточно прихваток. Никто силовые конструкции из голой арматуры не делает, для этого есть другие виды проката.
@user-tm7fu7vo5r2 ай бұрын
@@yurikponomarioff ванная сварка и для чего она используется прочти)
@alekceicaxa43812 ай бұрын
На арматуре у тебя и так зазор от рефления...и в нормах нет установки зазора если ты тока не в торец вариш...а провар будит по любому если ты уж совсем не сварщик...
@johnmichaels4330Ай бұрын
As a welder with 7931 and a half years, i can tell you this is absolutely the wrong way to weld two pieces of ductile iron together with an aluminum tig welder. That rod should have been a tungstin oxide inner flux core wire feed rod and the parts should have been prewelded in china first. Amateurs smh
@HOTPLATEGAMINGАй бұрын
I have 12 years of watching welding videos experience. Here is my 2 cents
@SUPERHEAVYBOOSTER3 ай бұрын
Welder since 1590 here. Worst welds I’ve ever seen.
@JamesHamp933 ай бұрын
Only 400 years in the trade? You don't even know you're born. When I was hired to weld Julius Caesar's chair made of rebar this is exactly how we did it.
@jozefk82013 ай бұрын
.
@Sanel_C2 ай бұрын
Wow 434 years in the trade?! How did you weld the Hun army's weapons when they broke on their conquest of Europe?
@djharml3ss2 ай бұрын
We love to see how you weld.
@flamingfrancis2 ай бұрын
Still serving your apprenticeship.? A mere whipper snapper
@austinl74292 ай бұрын
Not a welder but I feel like as long as the metal holds and stays together, then it’s fine
@holderheck2 ай бұрын
that is... why we have welding school.
@graxtheswampgoblinarchmage5356Ай бұрын
@@holderheckhe's right tho, holding and staying together is the goal
@codexy43352 ай бұрын
As a space welder i find the use of tools to weld offensive 😡🤬
@AriAxeLichАй бұрын
Зачем зазоры, достаточно радиуса арматуры и высокого тока.
@Johnny-oz3rj3 ай бұрын
Let me guess guys, the welds are the 'worst you've ever seen!'
@paullogieri2483 ай бұрын
He created a root gap, ran a continuous bead and chipped slag instead of the tacking without chipping slag that he usually does. Better
@JohnJohnson-tj2lt3 ай бұрын
No, this one actually wasn't bad. He's not getting any scorpion tails with that heat but not bad.
@brianb84893 ай бұрын
@@JohnJohnson-tj2ltHe welded over slag on his second pass😂
@victorcoroycuevas24163 ай бұрын
Es hermosa, pero la varilla jamás debe soltarse!!
@joseluisgomez24713 ай бұрын
@@victorcoroycuevas2416Sí se puede, eso depende. Se deben usar electrodos adecuados y aplicar las normas correspondientes.
@jerrynewberry28232 ай бұрын
Not allowed for concrete rebar... Changes the metal properties! Tensile, elasticity, etc. fine for fencing or farm work or hayseed mechanics. Can't use a torch to tut it either.
@patrickolson90892 ай бұрын
Will that inch of heat affected on the end change the properties of the whole bar?
@gnomewarlord89622 ай бұрын
@@patrickolson9089it creates a weak point where it's likely to snap so it won't affect the whole bar but where it was heated is likely to snap there is a way of welding rebar together and still using it for concrete without changing the properties all that much but it's honestly just not as cost-effective or safe as just tying it together
@sheldonmacdonald44382 ай бұрын
Only if it's not weld grade rebar, and building code in your area.
@jerrynewberry28232 ай бұрын
@@sheldonmacdonald4438 don't ever do it on any job in Texas. In all specs.
@jerrynewberry28232 ай бұрын
@@patrickolson9089 just telling you what my engineers told me on the job in Texas. You heat up more than two or three inches. Hold the bar while your cutting it, if you don't believe me. In every spec on every job I ever did in 45 years.
@BadbirdieАй бұрын
Welders are quiet until they meet another Welder and then they pull out the "um actually 🤓"
@bluesatmosphere4659Ай бұрын
As a non welder: that’s a pretty nice weld
@xDEADP00Lx2 ай бұрын
Get this man 50,000 an hr IMMEDIATELY 😂
@dragonnija171411 күн бұрын
Yes finally someone that doesn’t just tack tack tack and instead did an open root with a good root weld and cap well done sir
@clive0494Ай бұрын
As an actual welder watcher I rate this as 10/10
@beerczarcofigus87932 ай бұрын
Quality welders are rigorously trained and tested on their skills. None of that matters though for a home welder. This joint would work just fine at home. That being said. This is why welders in the comments are so critical of poor quality weld/welders. The standards they have been trained on live in their minds. This weld started off ok. A gap may not have been necessary. Where it took a turn was when they decided to weave the cap pass. Which caused inclusions in the legs.
@ZokalexАй бұрын
The cap what?
@furystream64363 ай бұрын
Как выбесить через экран🤯
@rudolfzxcv49633 ай бұрын
Я верно сделал
@user-ct7pk1xz8f2 ай бұрын
Тебя выбесили. А у автора 300к просмотров и тысяча комментов взбешённый правдоискателей. Что конвертируется в звонкую монету. А его кошельку с монетами глубоко наплевать, что в ролике показана бессмыслица или неправда, когда капают монеты!
@Eidoridori2 ай бұрын
I went to welding school... i dropped out because nothing i ever did was good enough 😂
@joshuacress5174Ай бұрын
As a welder of 69 years, with over 420 years of family experience.. I can tell you that this is a weld.
@jamiesonrich20932 ай бұрын
It’s all fun and games until you weld the guide to your project
@user-fg1gu1hy8i2 ай бұрын
Bahahahaha😂😂😂
@imana-hole35912 ай бұрын
I’ve been welding all of your life and I approve of this technique.
@theaterthug17972 ай бұрын
Be quiet
@edgarb.61872 ай бұрын
Aye
@jolty696917 күн бұрын
Getting acknowledgement from other welders is harder than with asian parents
@mikeguerrero7416Ай бұрын
As the inventor of welding, I can confirm these welds are decent.
@SamSebeStroitel3 ай бұрын
Зачем делать зазор при сварке арматуры или прутка, ну не будет такой нагрузки чтоб порвало сварочный шов, а если и будет нагрузка, то арматуру порвёт поперёк возле шва, а почему возле шва - да потому что арматурная сталь и так с мелкой кристаллической решеткой, так ещё будет и перекал металла в области сварки. Арматуру достаточно связать проволокой при некоторых условиях...
@user-zs7mg5oo7h2 ай бұрын
Se que en grandes losas en edificios en Asia para unir las varillas como si fuera una sola en tramos largos se le hace una rosca a la varilla y se van enroscando y aplicando una capa de recubrimiento antioxidante.
@Podlipaev-47RUS.2 ай бұрын
Полностью согласен, там и так фаска есть
@alekceicaxa43812 ай бұрын
Несущию конструкцию тоесть каркас варят...проволкой тока ненесущие крутят и те которые экономят...связка проволкой подруземает что битон будит определёной твёрдости тоесть марки при застывании..но где гарантия...
@JoseJ-oz6cn2 ай бұрын
Yo en su lugar, hubiera hecho un solape de mínimo de 40 centímetros y puntos cada 8-10 centímetros. Mucha Soldadura, hace que las varillas pierdan su rigidez, y el pilar o viga de hormigón pierden resistencia.
@cogitare3452 ай бұрын
Нахлёст делается 60 диаметров....
@user-bi8jo3nx1n2 ай бұрын
Там и без зазора можно проварить метал хорошо потому что как бы фаска снята засчет окружности арматуры😂
@Vis-Light2 ай бұрын
Thank you for this information random Russian man
@rok93612 ай бұрын
Только глянул на видео,сразу понял,что зазор ни к чему. А ты уже написал про это. 😊
@user-bi8jo3nx1n2 ай бұрын
@@rok9361 👍
@-so2qx2 ай бұрын
Обсолютно с вами согласен коллеги 😊
@user-sg1uq1yb3w2 ай бұрын
И на сколько я помню, если это для вязки, то варить нельзя вроде? Вяжут проволкой, или я путаю
@KaiHuanLaser-be5feАй бұрын
Well done, very good technique
@mhiraeybie05Ай бұрын
I forgot to wear an eye protection watching this. Now i have an eye problem. 😢
@vladimir_kafarov2 ай бұрын
Арматура и без температурного шва варится отлично!!!
@mixamars93173 ай бұрын
Как говорил мой мастер - Эдак ты нас без работы оставишь.
@user-vc8vm3fv5pАй бұрын
Сейчас бы говорить,что с зазором сварка металла происходит лучше чем без него,но арматура не самый подходящий для этого пример.
@woods04192 ай бұрын
It's amazing. Apparently we're all still waiting for the world's first successful weld.
@scottpollard75643 ай бұрын
Well at least he's not tack-welding like in his other 50 vids
@astronuim78752 ай бұрын
As a professional welder for 4 years I have seen my mentors welding and this is legit good welding, other welders be trash talking for no reason
@casperjohnninielsenАй бұрын
Farm welding 👍
@Sir_CatnipАй бұрын
"be trash talking"
@astronuim7875Ай бұрын
@@Sir_Catnip yep
@haslammmo9173Ай бұрын
As a potential welder, with hundreds of potential hours welding, I can say that those bars were in fact welded.
@vicclovin69420Ай бұрын
For 15 years Ive been a professional tradesman watcher, this was nice we can always be better though!
@user-mt1jg1ux8w2 ай бұрын
Не забудь проволокой скрутить для прочности.
@Igorechek4253 ай бұрын
Хрень! Я лучше с двух сторон проварю, плотно приложив вместе. Не тот случай, чтобы зазор делать - не поведет.
@marvet-ix9bk2 ай бұрын
You’re such a magnificent welder you take your wisdom to the comment section to put down other welders, top notch!
@MarkCash313Ай бұрын
As a non welder, I am curious as to what was the issue with the first weld start as opposed to the second weld start?
@user-sm2cl6yk9o3 ай бұрын
Работал сварщиком в арматурном цехе завода ЖБИ. Сваривали такую арматуру без всяких зазоров, и вся держалась как положено. После сваривания одевают шайбы на края, плющат концы, получается стержень для закладки в форму плиты перекрытия. Перед тем как заложить, растягивают
@sandrabulok46653 ай бұрын
Он под узк варит, цистерну соберёт из арматуры. 140-160 ампер, электрод четверка и печи до посинения 😅
@svarogua93 ай бұрын
@@sandrabulok4665140А четверку не потянет, не будет провара.
@user-hr5nc6xs3w3 ай бұрын
Здравствуйте, объясните пожалуйста, что значить на концы шайбы,
@user-fv2dc2wn8p3 ай бұрын
@@user-hr5nc6xs3wчтобы было за что цеплять при растягивании арматуры.
@maksivanov22103 ай бұрын
Одевают шайбы на стержень арматуры с другого конца Не с того что сваривают И чтоб шайба не слезла плющат конец со стороны шайбы И потом всё это в форму и бетон Посмотри ютюб про "преднатяг бетона@@user-hr5nc6xs3w
@tompease88102 ай бұрын
I was a stick and mini arc welder for a few years before retiring and this guy made me appreciative of what I used to do thanks for the trip down memory lane and Happy Easter