I hung one of each of my 3 granddaughters baby booties and memorabilia from each of their baptisms. Makes a lovely keepsake! These balloons never deflate!
@MeraBubbly4 жыл бұрын
sorry i am confused! Do you mean you made using keepsake stuffing machine or using clearz as shown in the video please?
@Volunteerballoons4 жыл бұрын
Krishna Murthy Clearz
@MeraBubbly4 жыл бұрын
@@Volunteerballoons i tried with clearz . 2 burst and 1 was leaking
@shagginsc13 жыл бұрын
in the old days i put stitched fishing line in the top of the head to make them sit up
@dsadasey3 жыл бұрын
Yup! And still works
@leticiacarrasco69642 жыл бұрын
Thanks for this definitely going to try it
@kimmoysteele40903 жыл бұрын
Hi can a bottle of wine with chocolates fit nicely into the clearz without trouble or I’ll need a super stuffer and latex balloons for that
@BalloonMarket3 жыл бұрын
I think it may be something you have to try and find out - I don't think it would be an issue!
@Peviputguy904 жыл бұрын
Hi it's me Pevi putguy and I like balloons. 😁
@belbatey81004 жыл бұрын
Stunning, I love it Chris 🐻🐻🐻
@jolane12972 жыл бұрын
Could I put liquid Plaster of Paris mixture and let it set inside? Use it like a mold? When the plaster is setting it gets warmer - this wouldn't cause the balloon to melt would it? Jo
@BalloonMarket2 жыл бұрын
Hi Jo, this is not something we've tried I'm afraid. If you give it a go, let us know how you get on!
@lidiavirginianovoaruiz43614 жыл бұрын
Espectacular, gracias por la clase
@traciecoutts91933 жыл бұрын
Hi Can you do this with a deco bubble balloon or just the crystal clear? Thanks x
@BalloonMarket3 жыл бұрын
This would not be recommended with the Deco Bubbles :).
@petakucas73894 жыл бұрын
You are Amazing !! 👏👏
@clairemac2 жыл бұрын
Any advice on small pin holes when you heat seal? Keeps happening 😴😅
@BalloonMarket2 жыл бұрын
Hi Claire, I would recommend checking out this video - kzbin.info/www/bejne/mnLOZal6nsmjd5Y :)
@ruthmill60114 жыл бұрын
Can another alternative to the heat sealer be used to re seal the balloon such an iron ?
@BalloonMarket4 жыл бұрын
Hi Ruth! We have only had experience using heat sealers so we would always recommend using these as they won't damage the balloon :)
@ruthmill60114 жыл бұрын
@@BalloonMarket ok thankyou
@jenniferbabe12673 жыл бұрын
What size clear is that? Thanks!
@BalloonMarket3 жыл бұрын
It's an 18" Clearz balloons :)
@marieholden58143 жыл бұрын
We’re would I get this bmtv 267 from please
@BalloonMarket3 жыл бұрын
Sorry Marie, I'm not quite sure what you mean. Do you mean where can you source the products?
@marieholden58143 жыл бұрын
@@BalloonMarket thankyou got one the balloons I get the necks are not that big were do you get your clear balloons from
@partymalarkey19413 жыл бұрын
What size clearz was this ?
@BalloonMarket3 жыл бұрын
These are the 18" Clearz
@karenmoffat38134 жыл бұрын
I've tried to do this with aqua balloons. Out of 7 I've only managed to keep one inflated. I've resealed and resealed and resealed and they just keep popping. Do you have any idea why?
@BalloonMarket4 жыл бұрын
Hi Karen, it is strange that they keep popping. Is it an audible pop or are they going down slowly over time? Are they coming into contact with anything sharp?
@karenmoffat38134 жыл бұрын
@@BalloonMarket One lasted a few hours but went down slowly. I'm sure it wasn't the neck because I had it tied with a 160q. One I filled with water and a flower and that's still standing after a week but the others inflated slightly and then popped. And yes with an audible pop and no they are not near anything sharp. It's frustrating as they are very expensive so I can't just buy a sackful to practise.
@BalloonMarket4 жыл бұрын
@@karenmoffat3813 I'll email the manufacturer. With regard to the ones that popped, can I ask how you were inflating the balloons and with what nozzle? The more information I can give them the better :).
@karenmoffat38134 жыл бұрын
@@BalloonMarket Well on your website it says to inflate quickly so I used my electric pump for the 235 mm and I used the Qualatex hand pump for the 125 mm. It was the same result with both.
@BalloonMarket4 жыл бұрын
@@karenmoffat3813 thank you. I will email them and let you know once I have an update. I shall drop you an email :)
@silviallamas80333 жыл бұрын
POR FABOR LA TRADUCCIÓN EN ESPAÑOL YO QUIERO COMPRAR Y NO DICEN A QUE DIRECCIÓN PEDIRLOS NI LOS COSTOS
@MeraBubbly4 жыл бұрын
what is the size of the teddy, please?
@BalloonMarket4 жыл бұрын
Hi Krishna! This is 11" :)
@MeraBubbly4 жыл бұрын
@@BalloonMarket thank you for the prompt response and clarification, its so helpful indeed!
@jessicacastillo19604 жыл бұрын
Hi, thank you for the video. I am wondering what is the name of the tool used to get the circle paper inside the balloon, it looks very useful. Where would you believe I could find it?
@fatimahishaq85004 жыл бұрын
Jessica Castillo castration tool
@melmac13064 жыл бұрын
I've tried this many times and I always have air leaking within 12 hours. I have sealed, double sealed, modified the heat sealer setting...I've wasted a lot of time and a lot of balloons :) But yours always look smashing
@lamenche4 жыл бұрын
That's curios, I wonder if anyone else has had the same?
@BalloonMarket4 жыл бұрын
Sorry to hear this, are you UK based?
@sherrierichards91524 жыл бұрын
I have the same issue with smaller bear and 30 lb fishing line. Will try thinner line. Was very slow leak.
@BalloonMarket4 жыл бұрын
@@sherrierichards9152 Oh yes, this is an excellent point. Please let us know how you get on!