6 Tools I wouldn't want to be without

[@StumpyNubs]

▼EXPAND THIS SECTION FOR MORE RESOURCES RELATED TO THIS VIDEO▼ -ISOtunes 20% off discount code: Stumpy20 (good for just three days here: bit.ly/3jsnSLY) -ISOtunes 10% off (for after the 20% expires): bit.ly/3BHYdH7 *Tools featured in this video:* 0:00 1:10 Kodiak Tool Rest: woodturnerswonders.com/collections/grinding-wheel-accessories/products/stand-alone-tool-rest 3:43 Aluminum Straight Edges: lddy.no/191kj 5:42 Harvey Alpha Bandsaw: www.harveywoodworking.com/collections/bandsaws (Review segment for Ambassador saw: kzbin.info/www/bejne/aomxmWOsZ6yIgKM ) 9:16 Zerust Capsules: amzn.to/3sF7b55 10:07 Bridge City Universal Gauge: bridgecitytools.com/products/ug-1-universal-gage 11:01 Stanley pocket measuring tape: amzn.to/3KYRI6c (Harvey, Bridge City, WoodTurnersWonders, ISOtunes, Taylor Tools and Audible are partners of Stumpy Nubs Woodworking Journal) Watch more Cool Tools videos here►kzbin.info/aero/PL-gT7JMZFYjdW0383kgJVMj0ocXbLXtpQ (If you use one of these affiliate links, we may receive a small commission) ★SOME OF MY FAVORITE CHEAP TOOLS★ -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Irwin Drill Bit Gauge: amzn.to/2AwTkQg -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Punch: amzn.to/2QvbcrC -Self-Centering Bits: amzn.to/2xs71UW -Angle Cube: lddy.no/10nam -Steel Ruler: lddy.no/10mv7 -Utility knife: amzn.to/3nfhIiv -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Digital depth gauge: amzn.to/3mwRf2x -Wood Glue: amzn.to/3mqek6M -Spade Bits: amzn.to/3j8XPtD ★SOME OF MY FAVORITE HAND TOOLS★ -Digital Caliper: amzn.to/384H1Or -Marking Gauge: lddy.no/10muz -Marking knife: lddy.no/10mv0 -Narex Chisels: lddy.no/sqm3 -Stanley Sweetheart Chisels: amzn.to/3y5HDOc -Mini Pull Saw: amzn.to/2UEHBz6 -Gent Saw: lddy.no/ss2x -Coping saw: amzn.to/2W7ZiUS -Shinwa Rulers: lddy.no/zl13 ★SOME OF MY FAVORITE POWER TOOLS★ -Miter Saw: amzn.to/3gqIlQ8 -Jointer: amzn.to/3yc3gfZ -Planer: amzn.to/3mn6BGF -Router: amzn.to/3grD22S -Sander: amzn.to/3DdvD0Y -Cordless drill: amzn.to/3D9ZiIm -Brad nailer: amzn.to/3gsRkjH -Mini Compressor: amzn.to/3mvrmQr -Bladerunner: amzn.to/2Wl0TtJ -Jig Saw: amzn.to/3zetTBY -Scroll Saw: amzn.to/3gq9qDc -Multi-Tool: amzn.to/3muZuMi ★SOME OF MY FAVORITE OTHER TOOLS★ -Drill Bits: amzn.to/3B8Ckzh -Forstner Bits: amzn.to/3kk3wEI -Shop Vacuum: amzn.to/2Wkqnbl -Machine Setup Blocks: amzn.to/3gq7kDh -Counter-Sink Bit: amzn.to/37ZukUo -Featherboard: amzn.to/3DeqHsq -ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7 (If you use one of the affiliate links above, we may receive a small commission)

[@laurensbakker4730]

Do you have a link for the straight edges?

[@StumpyNubs]

lddy.no/191kj

[@joemizzi5120]

Does the ISOtunes 20% off discount apply in Australia?

[@chadwick-y5p]

I’ve purchased squares and now a universal gauge from Bridgecity. It bothers me that they ask for a tip during checkout. My god, isn’t a tip included in these ultra-expensive tools. Not buying Harbor Freight?

[@StumpyNubs]

@@chadwick-y5p Yes, it seems like everywhere I go there's a tip option, these days. But it's easy to just ignore it if you don't want to leave one. Nobody shames you for it. Of course, the price of the tools have nothing to do with it. They are "expensive" because they are made from premium materials, to exacting standards and in small quantities. I'm not sure the profits for Bridge City are much more than for most other, less "expensive" tools.

[@madhounddog04]

I'm a disabled veteran and I don't have a lot of money to purchase things. Everything that I have, I get here and there. It's not the best equipment, but it's the best equipment that I can purchase. I would love to get a lot of things in your video. Please keep making your videos, they show me how to do things. Thank you.

[@Bigevilfishy]

Hey brother! I’m a 30 year old man child and barely have enough money to feed myself some days, but I always keep an eye out of Facebook marketplace or craigslist!

[@hgbugalou]

Seriously, you are one of the few channels I buy stuff based on recommendations. Your suggestions are always on point.

[@ThekiBoran]

You ain't lyin'.

[@rankedrecruit6590]

I bought an ambassador bandsaw a month ago and had problems with the guide post being parallel to the blade. I wasn’t able to fix it myself so I contacted the company which were super awesome and worked with me to find a remedy to the problem free of charge. really great company!

[@StumpyNubs]

Glad to hear it :)

[@splinters_66]

I have an ambassador as well,fantastic bandsaw,the only thing I don’t like is the way the red blade protector is fixed with only one screw at the bottom,it’s slightly out of parallel,but doesn’t affect performance. My tension gauge also crapped itself the first time I tensioned the blade,heard a loud bang,which was obviously the spring popping off,and no ,it wasn’t over tightened. Also doesn’t affect performance,wouldn’t rely on it anyway. I noticed in one of James earlier vids about the saw, it appeared that his tension gauge was also broken (you can see it when the top door is open),unless he had the blade tension off. Otherwise a fantastic bandsaw.

[@rankedrecruit6590]

@@splinters_66 my tension gauge is also broken but I don’t use it anyways. I find the good old finger method is more accurate

[@collinsganson5115]

I've had that same Stanley pocket measuring tape since about 1970 (WOW 50 years). Still take it with me to the hardware and hardwood stores.

[@EntropicTroponin]

Why do you have a dedicated tape to measure your pocket? Any tape will do 😁

[@yisraels4555]

Wow! I think the longest I have ever owned a tape measure is maybe a year.... Somehow they just vanish kind of like 10mm sockets.

[@TheBiggerNoise]

I inherited my Dad's. Same model, I can remember him using it for his various projects when I was a little boy (early 70s). Thing has really held up.

[@KaladinDarkEyes]

I go through one about every two years but I use it for the diameter function on the back to measure dust collection pipes at factories. Another great use for them is measure around the curvature of something.

[@chadpersing5596]

Is the 10' a steel case tape? I've owned multiple 12' Stanley's over the years as it is a steel case, one of the only I've found. It's also just slightly larger than the 10' and has a standard tape blade with the "u" shape allowing it a small amount of stand out. Also fits in the pocket quite easily. I highly recommend. Thanks for your video's James 👍

[@Webendowed]

I totally love the ISOTunes. They are really one of the best things I've done for my hearing in a long time. I have the pro headphones as well as the plug in mp3 ones and the blue tooth ear buds. Yesterday I mowed my yard and listened to good music instead of the hum of the tractor motor. Today I vacuumed the living room without hearing my dogs complain about it. Tomorrow I'm gonna tune my wife out while she complains that I had one beer too many and embarrassed her in front of the neighbors for the umpteenth time (while wearing my ISOTunes and tuning neighbors out.) I'm not a sponsor but I'm a satisfied customer :D

[@tummytub1161]

Me too, I bought everyone in the shop a pair. They are awesome!

[@CountDoucheula]

Conversely, I kinda like being able to hear my lathe a little bit whilst jamming tunes. Let's me know everything's running at decent speeds

[@Webendowed]

@@CountDoucheula They are adjustable. You can choose how much of the outside world to let in and agreed lathes are important to listen to but you can limit exposure and still hear clearly with these.

[@wilhelmtaylor9863]

I'm 74 and have been woodworking since high school. Here's a little ditty that I recently re-discovered during a trip back home to Köln: Folding rulers, usually 2m or 6 ft long with a 6" extension. You absolutely can't beat them for measuring inside dimensions such as cabinets. For some reason my German wood working friends prefer them over tape measures which I wouldn't want to be without. But since I got the General 6' rule I found it great during my last kitchen remodel. Yeah, 6', not meters. Oh well....

[@charleshirst6220]

Based upon your review, and another online review that I subsequently found, I bought the ISOtunes hheadphones and they sure are excellent. My wife used to complain that I has my radio/music turned up way too high. Now she complains because I cannot hear her calling me - but she can always phone me. The extra peace & quiet is an unexpected bonus!

[@MB-zj3er]

Thanks for that tool rest. One of the shortcomings on my grinder. That looks like a quality piece.

[@BobBob-eh5sb]

I’ve milled trees on the ambassador. I built a slide table with a jig with an adjustable fence to hold the logs. I cut down six dead Ash trees and cut the trunks and bigger branches with a chainsaw jig. Everything else that was under 14 inches and under around 4 foot long, went through the bandsaw.

[@TrevorDennis100]

One of my favourite tools is a 3M DeWalt tape that I keep in my pocket. It was given to me by a rep which made it feel extra special. I resisted buying Isotunes ear muffs the last time you mentioned them, but 20% was too much to resist. The shipping was expensive at AU$79 but they do at least ship to New Zealand, and they will save me using and spoiling my $550 Bose headphones in the workshop.

[@TrevorDennis100]

I've been using the ISOtunes Link 2 for several days now, so it only took a couple of weeks to reach me in New Zealand, (I think they shipped from Australia). The sound quality is good and the build quality excellent. I've read reviews that said they are a little tight on your head, and I'd say that was an understatement, although to be fair, I do have an XL hat size. They fit 'on' the ear rather than around them like the 3M Ear Defenders I own. The tight fit makes them particularly uncomfortable if you wear glasses as it makes the arms dig into your ears. I am wondering if I dare stretch them over some timber and gently warm the bridge with a heat gun? They are a bit too expensive to ruin, but I can't see me wearing them for hours as they are.

[@jackburrows1071]

in Australia's bunnings you can get "worktunes" bluetooth headphones/hearing protection for 99$, not sure if you have bunnings over the ditch but we usually share most things, i use them everyday, good battery life too

[@ThekiBoran]

I like ear buds when working by myself in the shop but on a job site I like to be able to hear.

[@ngbc5342]

GOOD ''OL STUMPY! HE REALLY KNOWS HIS STUFF

[@MC-wq4fk]

I've been looking at bandsaws to replace the Laguna I sold just before I moved and want to thank you for this timely post!

[@supersproodle]

Good input regarding the Harvey bandsaw. I am between the Ambassador C14 and a Laguna 14bx 2.5 hp.

[@StumpyNubs]

The Ambassador has more power, more resaw capacity, bearing guides instead of ceramic blocks, and when bought on sale (which is frequently) it's less expensive. The Laguna has cool disc breaks and a higher table height (the Harvey table is a little low, in my opinion.)

[@BroncoSteven69]

I wear those same pants man. They deserve a mention. Super tough yet comfy.

[@StumpyNubs]

They were on Cool Tool several years ago

[@carlcox7332]

I carry around the 16ft version of the Stanley everyday. Best tape ever. I prefer the slightly stiffer and wider tape in the 16ft. It's just long enough to handle about 90% of everything I do at work. We build high end custom cabinets and millwork so rarely do I ever need anything longer than 16 ft. When I do it usually measuring out a room so I can just use a Bosch laser tape measure. I even ran over my old Stanley with a skilsaw a couple years ago and it still works perfectly and not having to worry about someone stealing it is a bonus lol

[@chrisjordan4210]

I found the Stanley Lever Lock tape even better - it works the other way around, you have to press the lever to release the tape, and then it auto locks.

[@AggyLovesGames]

I have similarly sized tape measures made by dewalt. I have them because they're also quite inexpensive (< $10) but have magnetic backs. Just a wonderful little thing for keeping them handy.

[@dnngskn62]

Much appreciate you sharing your knowledge and the tell it like it is mentality. We need more of that in the community.

[@mickwildbore153]

Thank you for these videos, I really appreciate the your presentation skills too. You have obviously taken quite some time to learn how to present very well. Keep up the good work teaching people like me.

[@J.A.Smith2397]

And hey that Kodiak carriage gizmo does look very handy, Tks for that one

[@sinbadcleo]

This may be thought 'inappropriate'. I'm a foreigner - and I have derived both pleasure and inspiration from those several Stumpy Nubs vids I've watched. There are times when I despair about America - check the date and the news! - but then I 'clock' people like SN and his contributions, and I'm somewhat 'moderated'. FWIW, I'm not normally given to political expression on anything - for me, it's always down to people and what they're about. I learned a long time ago that a teacher imparts MUCH more than his/her subject material. So thank you for the 'makers' insight.... and the rest of what you impart.

[@Buddygold9509]

Perfect title. “Cool Tools”. Thanks for taking the time to show us.

[@peakhour]

just bought a Taylor straight edge, thanks for the tip.

[@tfwoodcraft]

I use that little stanley tape a lot too, but just today noticed the weird diameter scale on the bottom. I was actually trying to measure a diameter when i noticed it, but i wasn't sure how to use it. I wrapped it around a 2" pipe and it lined up with 1". I wish it just had inch markings on the bottom as well...or maybe i should learn the diameter scale

[@ironwood1621]

The Bridge City universal gauge is not only extremely functional, it’s really cool looking.

[@iratevagabond204]

I'm glad I'm not the only weirdo that EDCs a pocket tape. I've got two, the Stanley 175th Anniversary one, and one by "The Perfect Tape Measure" company, called the Perfect Pi. My previous one was handed down to me, and had a leather and brass housing. It was really old, and when I could start affording to buy random stuff, I put that one on a shelf for display.

[@curtmu]

Is great video, On the pocket tape you missed the handy little feature on the back, It's a diameter measuring scale, Handy for measuring a round or a piece of pipe.

[@montyr14]

Thanks to your previous advice I own the C14 and could not be happier. Only the blade guide lift handle is not great but easily replaceable. And thanks for these useful 'cool tools' series, always something new to discover.

[@SealFredy5]

To prevent rust on bits, I just suggest applying a little bit of oil on them after use. It will help you keep them clean, and the oil will prevent them from rusting no matter where you keep them or the humidity.

[@DugMcClure]

I have that 10’ Stanley. I keep my 25’ in a drawer in the house, and the 10’ in the console of my car. Wherever I’m at, I’m only a few steps from one!

[@Emily_M81]

I need that universal gauge in my life. It does things I didn't even know existed until KZbin showed me your channel. Glad they have metric, too :D (said as an American lol)

[@Corathor]

Just a suggestion, if humidity is an issue instead of investing in tabs that will likely have to be replaced over time, perhaps invest in a dehumidifier. Depending on the shop size they can be very cheap and will work for the entire shop area.

[@anomamos9095]

I liked the multi gauge thingy I might get one as soon as I get a shop to put it in along with everything else on the wish list. I saw one of those little pocket measures with a spring loaded pin at the back to mark or swivel the tape end

[@willschmit436]

I carry a 6 foot tape in my pocket. It is so old and worn that I can't even tell you the manufacturer (it is yellow). The real advantage is that it has metric and inches. I use metric a lot. I have worn out dozens of them. I had a TSA agent in Mexico steal one after 9/11 (because he could). Most bigger tapes have the option. You can buy them in inches, metric, or both. 30 years ago, I had a 1" wide Stanley tape that I used as a carpenter. I worked on lots of projects that were rigging, moving, or setting up wafer handling machinery. I always kept an extra one in the truck, so I could give it away. Almost every job had Japanese experts that came to town for the job. They always worked in metric...

[@russellcasperson6695]

I love my universal gauge. I bit the bullet when they had a 50% off sale it is amazing for tablesaw setup.

[@jn651]

I'm still using my little tabletop Craftsman bandsaw. It's only good for material about 5" high, but the throat is as wide as I need for my projects.

[@olddawgdreaming5715]

Great reviews James and all good suggestions !! Thanks for sharing with us, stay safe around there. Fred.

[@ohgary]

Say, that Bridge City website you linked to was just a delightful work of art!

[@LyleAshbaugh]

I just purchased your band saw plans from your website. I hope that becomes my own cool tool someday. 😎

[@Tommy.461]

I have a small collection of miniature tape measures. From 3 feet to 10 feet long. Most are advertisement tapes. Love them.

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@Dseated]

I got the 175 year anniversary stanley sweetheart 10', doesn't come with a clip, but there is a screw for toy to transfer one.

[@scottmorris4914]

Bridge City has the Universal gauges on sale right now for $99 each, down from $239. When you look at all the tools the Universal Gauge can replace, the sale price looks pretty good.

[@ipick4fun27]

I was shocked to see that price when I visited their website. I was wondering why so low. Now I know. I bought a blemish combo square set at that price recently. On that note. Why is buying set of 2 costs $289 when individually they cost $99 each? I have hard time understanding that. Now I just need 1 excuse to convince myself to get at least one of them. Left or Right and for what reason?

[@gddrift6690]

Yep, I just placed my order for the UG-1 Universal Gauge. When I saw the price, it was too good to pass up! Darn cool tool too.

[@kennethstaszak9990]

@@ipick4fun27 The web site suggests that if your table saw blade tilts left (from the operating position), buy the right handed gauge and vice versa.

[@J.A.Smith2397]

Once again I gotta ask for old timey workshop! Maybe once a month for us hand tool guys plz lol it'll make you more my boy blue

[@christophercastor6666]

Love the valuable information from your professional first hand experience with the products! Thank you as always, -CY Castor

[@frankschafer1505]

Now that's an impressive set of router bits!

[@Handyman247llc]

I enjoyed you list of tools Zerust cupulas I didn't know of they work, so now I do (sold me). some of the other tools are a little on the pricey side but something to consider when I want the tool bad enough and can work the budget to fit. Thank you again for the information it was a very informative video to watch.

[@georgehart8385]

What brand jeans are those with the leather patch over the pocket edge? Great idea.

[@55418und]

Tool test for grinder is great for lawn mower blade sharpening.

[@jonkoskela7682]

instead of Zerust Capsules, you could just use desiccants which absorb excess moisture. I have a great customer at my pharmacy that does wood working so every 6 months or so I just have the techs save 50-60 from the pill bottles and give him some to replenish his supply. Won't get that service at CVS, Walgreens, or any other big company but find a local pharmacy and I'm sure they'll be happy to do it.

[@brakeme1]

I checked out wood turner wonders…and wow what a great find!… for me anyway. Great non typical stuff!!!thanks? Love ur show!

[@StumpyNubs]

Yes, they are a really great business. Ken, the owner, has built it one customer at a time at little woodworking shows over many years. He's one of the pioneers of CBN wheels for woodturning. And his staff is amazing too.

[@TheTranq]

I liked that shot of cutting the veneer with the alpha. As soon as I have the shop space I will get a Harvey bandsaw

[@kylebrown6951]

I kind of wished you would've gone on non about the straight edge like you did with the tool rest.. I would like to know just what all can be done n uses for them, just for calibrations n such...

[@Peter-od7op]

Which protractor should i get left or right new to this.

[@dennisspeer8077]

The Stanley 10' tape measure is also a Pi tape.

[@jhoodfysh]

Thanks for this group of tools. They are cool.

[@MOZOGuitars]

How would you compare the effectiveness of using the anti-rust capsules compared to silica desiccant packets?

[@billbris]

I concur with your Harvey bandsaw assessment. I have the Ambassador and with a carbide blade it works amazingly well. One question, is there an aftermarket guide rail available? Changing the guides is a huge nuisance, and my circular bar sits about 1/8" above the slot making some cuts nearly impossible. Harvey's answer was to loosen the nuts connecting the bar to the table. I don't need a loose bar, just one that sits properly. Basically, this is a weak design point for an otherwise wonderful product. Suggestions?

[@StumpyNubs]

I believe they meant to loosen it and shift it downward, then retighten it.

[@billbris]

@@StumpyNubs That's what I thought as well. When I retighten the bolts the guide is brought back to its original position; too high. It is a choice between loose and a height that's out of the way, or tight and the guide is in the way. I don't like either option, thus my search for a third party guide, so far not much luck. I would love to have something like that on the Alpha series, without having to buy an Alpha series. Thanks for the input.

[@horologist2233]

Thanks for posting. It finally got me motivated to buy my ISOtunes ear plugs. They are great people to deal with and very helpful. I'm impressed and looking forward to getting rid of the mouse ears.

[@kevinmiller1881]

Had to pull the trigger on that bridge city tool. A $250 tool for $99 too good to pass up.

[@natebrooks7015]

I never miss one of these!

[@Peter-od7op]

Ty for having tools that i can afford to buy

[@David_K_pi]

You didn't mention one of the cool features of the little Stanley 10-foot tape measure. There is a calibrated scale on the back side of the tape for accurately measuring the outer diameter of round stock, such as dowel rods, PVC and copper pipe, etc. It automatically does the divide by π (pi) calculation for you. I use that feature often.

[@ipick4fun27]

Very interesting. Do you roll the pipe along the tape measure for 1 revolution to measure circumference to get the diameter?

[@michaelwarren2391]

@@ipick4fun27 You wrap the tape around the item you're measuring. You read the diameter off the tape scale.

[@David_K_pi]

@@ipick4fun27 - It's even simpler than that. There is scale on both sides of the tape. The front scale reads inches and feet like normal. The scale on the back side is inches times 3.14159265… Wrap the tape around the pipe with the back side of the tape facing out. There's a reference line on the tape. Match the reference line up to the "pi" scale and read the diameter directly.

[@jaayjones5937]

Would Zerust work to keep a shotgun from rusting in a gun safe? It's months between opening the safe and dad usually has to oil his shotgun to get the rust off every fall.

[@mikedurkee7296]

absolutely love my iso tunes ear protection (per your recommendation a while back-thank you! next up dust mask for a person that wears glasses and HATES when those glasses get fogged up and suggestions?).... great excuse to listen to Iron Maiden while creating sawdust!

[@MCsCreations]

Awesome looking tools, James! Thanks! 😃 The anti rust thing is brilliant! Stay safe there with your family! 🖖😊

[@hermit84]

Unfortunately, the straight edges seem to be not available in Europe. I am looking for something like this for years - but have only seen way too expensive or bad stuff.

[@fatoldcat]

On the Harvey Ambassador, what's the biggest blade that it can handle for resaw?

[@SawdustmakerLori]

Always enjoy your cool tools video's and see things I can't live without!!! Thanks and I'm looking forward to the next one already.

[@joshuamacdonald4913]

That zero rust IS something I need.

[@TheGraemeH]

Funny that I got a email from Lee Valley for Isotunes headphones that was about the same time stamp as this video’s release. Kismet

[@txmexnittro]

Awesome video thanks for sharing

[@artswri]

Thanks much for the reminder to buy some more zerust stuff, can't have enough to fight the humidity! The combo tool looks really kewl but... I like more one job per tool (mostly), dunno why, just do. Thanks as always for a great quality video!

[@chagildoi]

Just ordered the isotunes you’re holding using your code

[@ewithnall]

How do you know the zerust is working? If it isn't, then by the time rust appears it's kinda too late :-(

[@robertbankhead8661]

in the market for a band saw, prefer 14" with 220 v motor. Hmmmmmm, the price is definitely in the right place. Thanks James.

[@Rich32262]

The Bridge City Universal Square is on sale for $99. regular price is $239.

[@rkerby6375]

Great tools! Well done!

[@Daijaxx]

Just a quick query, what are the trousers that you're wearing in the clip at the end, with the leather bit to clip bits on?

[@StumpyNubs]

Wrangler Riggs

[@benbuckley2229]

Not one for tools cover, but I'm looking for a good multitool with a pocket clip and noticed yours. Do you mind me asking what it is and if you would recommend?

[@francischarboneau3793]

I bought the ISOtune Alive and absolutely hate the noise-canceling feature. It constantly makes a popping sound going into the noise-canceling mode, very annoying. The only workaround is to disable the noise activation mode. The positive is that even with the noise canceling off Bluetooth is still functioning, enabling you to hear your phone.

[@sewob147]

Interesting that the 10ft tape here in the UK is the equivalent of $23.79 rather than the US price of $8.95, as good as three times the price.

[@kenhorner4023]

Did you put the measuring tape on the straight edges yourself? The black ones in the link you gave has no measuring tape. I know thats not exactly what you use a straight edge for, but its nice to have on there.

[@StumpyNubs]

I've never used them to measure.

[@michelhv]

The machinists’ channels on KZbin are so chock full of grinder steady rests, you should make a collab. They also drink rust inhibitors by the bucket.

[@jackthompson5092]

I just bought an ambassador 14 inch bandsaw. I am having trouble adjusting the table so that the blade when fully tensioned and the guide bearings are backed off, that the blades goes through the centre of the throat plate opening. I need to use the guide bearings to push the blade over to the centre of the opening. Any ideas? I do think that the table is as far forward as it will go. It needs to go another 1/8th inch forward.

[@StumpyNubs]

I can't imagine why that may be. Sounds like the table is out of place. If you can't get it adjusted, Maybe give them a call.

[@reubengoldberg2189]

I am enthralled by your wonderful videos. I was surprised that when you retracted tape you let the tape end slam into the case. To accurately measure inside and outside dimensions the tip has a slot that allows the tip to move and therefore compensate for the thickness of the tip. This slot can elongate from that slamming and no longer give an accurate measurment

[@devinparry1152]

Not true. kzbin.info/www/bejne/sGqon2ONdtiDbqM

[@StumpyNubs]

I've done that my whole life and never found it to be an issue. Steve Ramsey ran an extensive test and also found it had no affect.

[@MRrwmac]

Those are some very interesting tools! Thanks!

[@Smurphenstein]

Stumpy Nubs has more planes than an aviation museum.

[@beretaniastreet6384]

What brand are those cool pants with the leather knife clip protector???

[@StumpyNubs]

Wrangler Riggs

[@beretaniastreet6384]

@@StumpyNubs THANK YOU!

[@54mgtf22]

Love your work 👍

[@colintroy7739]

Hello! I got suggested stumpy nubs videos from youtube and have since watched quite a few, i was wondering if anyone knew of a similar style of channel/vibe but for metal working projects and tools. Really great content just looking for a metal counterpart.

[@guymacino9709]

I can't find links to all of the tools you showed in this video

[@StumpyNubs]

Pinned to the top of the comments...

[@JackWagonOne]

So there’s no way to not awkwardly ask this, but, what brand of pants are those? I like that pocket setup seen when showing off the watch pocket you don’t use for a watch.

[@StumpyNubs]

Wrangler Riggs

[@JackWagonOne]

@@StumpyNubs nice! Thanks!

[@farmboy5129]

My solution to a humitity issue is move to New Mexico. Single digit humitity for over a month

[@isaacbrooks5999]

I noticed that your pants had a leather section on the pocket to prevent wear from EDC clips. What pants are they? You should have an apparel version of Cool Tools!

[@StumpyNubs]

Wrangler Riggs. They were on Cool Tools several years ago.

[@isaacbrooks5999]

@@StumpyNubs Thanks! I thought I'd seen them all, but I must have missed that one.

[@donschweitzer3045]

Love my alpha, ☺️

[@toddharshbarger8616]

As always what great info

[@dougc78]

This may be a odd question but what brand pants are you wearing in this video?

[@StumpyNubs]

Wrangler Riggs. Had them on Cool Tools 5 years ago and I still wear the brand for work everyday.

[@dougc78]

@@StumpyNubs I thought I recognized the "R". Thanks!!

[@robertball3578]

@@StumpyNubs good timing. Wife informed me Saturday that she was scrapping a pair of my pants, and the pair I was wearing are getting baggy, don't wear them anymore (lost 14 pounds on Keto diet, mostly from my belly).