STYLE CRAFT VS ANDIS 4K

Shop With Me At:
www.360Jeezy.com
Follow me on Instagram: 360Jeezy
/ 360jeezy
BEATS HustleDreamProduction KZbin Channel:
/ @hustledream
To Purchase The Tools I Use In This Video:
Clippers
StyleCraft Instinit: amzn.to/3w3vttU
New* BaBylissPRO FXONE Black: amzn.to/3tKNdtf
NEW* BaBylissPRO FXONE GOLD: amzn.to/48MZa0e
New* Babyliss LoPros: amzn.to/41PefMC
New* StyleCraft Rebels: amzn.to/41NNmst
Oster Cordless FastFeed: amzn.to/38nxO7h
Andis Cordless GTX: amzn.to/3D7h2mU
Babyliss Gold FX Clipper: amzn.to/2qWqdqV
Babyliss Gold FX Trimmer:amzn.to/2OHaMvy
Babyliss Gold Shaver: amzn.to/34JzMbj
Wahl Cordless Senior: amzn.to/3F9Y4h7
Andis Cordless T Outliner: amzn.to/2LwaENN
Oster Fast Feed: amzn.to/2DhZ4ir
Andis GTX: amzn.to/3xP9tSo
Andis Slimline Pro Li: amzn.to/2BWZrTC
Wahl Magic Clip: amzn.to/2BHb10H
Wahl Hero: amzn.to/2CaP1wq
Wahl Senior: amzn.to/2tH3zmQ
Shavers
NEW BaBylissPRO FXONE Double Foil Shaver: amzn.to/3H7Th29
Wahl Shaver: amzn.to/2P5xBIl
Braun Series 9 Shaver: amzn.to/2Hoo0qH
Andis Pro Lithium Shaver: amzn.to/2BYDvr1
Clipper Blades
Andis GTX Blade: amzn.to/2mGzYmG
Ceramic Blade for Fast Feed: amzn.to/2DnzVGU
Andis Slimline Po Li Blade: amzn.to/2DnhYbr
Wahl Hero Blade: amzn.to/2DpuSWm
Other Accessories
No Turn Magnetic Guard Holder: amzn.to/2lFMsdP
Andis Double Magnetic Guards: amzn.to/2DOUEjB
Film Equipment
Canon EOS R: amzn.to/2DBAzzb
Canon 90D: amzn.to/2Y9v4RA
Canon 80D: amzn.to/2C9JEQu
Tripod: amzn.to/2CDmlMS
50mm Lens: amzn.to/2CaBQOp
Sigma18-35mm Lens: amzn.to/2CdaY06
Ring Light: amzn.to/2BHqOwy
Samson Wireless Mic: amzn.to/2DVQNSJ
Mac Book Pro: amzn.to/2DiKhnJ
#360Jeezy #HaircutTutorial #360Waves

[@stevensgoldenjr]

The Andis guards also fit the Oster Fast Feed clippers! I still use my CORDED Fast Feeds....👍🏾✊🏾💯

[@richnatural6429]

Smart man. I have a pair been using for 9 years not a single issue.

[@kennyking6323]

Oster Fast Feeds are the most slept on Clippers!

[@princezay3608]

Of course you do unc!! You’re old

[@Cobratruth]

Goated clippers fs

[@jamesonshields4393]

😂😂😂😂

[@tww15tube]

Andis system always for me. Even when I tried wahl clippers, I had to put Master blade on. Them original purple guards are undefeated!

[@Mr.Brown007]

Jeezy appreciate you Fr you not lying I didn’t know this information

[@KingxCJay]

been waiting on this vid

[@Belloscutz]

I needed these two cents!🔥🔥🔥

[@kilotwoxz8002]

Bro went crazy on that beat 🔥🔥🔥🔥🔥

[@redx7536]

I like this intro song!

[@davjohn775]

Thank You for this 1💈

[@3xgaming3]

My dawg 360 💪🏾😂 you taught my big brother how to cut 5 years ago now he goated fam I just hopped in da game and progressing well #360gang

[@Supreme_Sole]

I started using the gamma guards on my clippers, and the blends looked smooth

[@Jorich196]

Yo Jeezy havent been on ya vids as much since covid but good to see you till doing ya thing family 💯💪🏾Know im still a subscriber

[@shamargriffin1600]

Great video Jeezy,! Dropped some straight gems. I just bought that same andis 0 guard for $11 yesterday. Then you dropped this video. It makes a big difference in fading. Good looking out! 💯💈💪🏿

[@richnatural6429]

Got mine for $8 on Ebay

[@DwaynePrice-bk8ys]

Hey Jeezy wats up dude great video🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉❤

[@WaveyCuts87]

I use the Stylecraft guard system but I was using the Babyliss premium .5 guard for a while and now I’m using the Wahl .5 guard to see which one I like better…I rock with the Andis guard system too just to switch it up

[@Metalviathan717]

I love them both. I use the Masters and the Mythics

[@nataliemscrzysxycoolharris]

Hey Jeezy 😉 Drop those gems!!

[@juliusedwards7199]

I prefer the Wahl system b/c it has more of a universal application.

[@RHBlends]

I think it’s more about how long the clippers open with no guard that makes the real difference. With my JRL plus SC guards, I find that transition to be just like my masters from back in the day

[@ArabicReviewed]

100% on the money, the JRL taper blade open is similar measurements to Masters open

[@bfuq]

Any problems with the babyliss gold fx clipper guard system. I have both andis and that. I like andis better. ?

[@calebcastro896]

I have the stylecraft booted clippers and I use the wahl guards system and it works wonders 👍🏽

[@emilianoayala6305]

gotta try out them stylecraft small tooth guards

[@anthonyvilla6924]

Hey Jeezy what about the sc dub tight guards what you think about those

[@davjohn775]

I like the Gamma Stylecraft guards on my Babyliss Lopro Fx stretch lever💈

[@neil231]

I use the BabyLiss premium guards that resembles the Wahl System.

[@Mr.Brown007]

🔥🔥🔥🔥

[@Cozblendz]

In the beginning of my career I just used andis gaurds with fast feeds, but over time as I converted to cordless clippers I slowly learned the wahl gaurd system. At this point in my career I can cut with whatever gaurd given to me but I will say that the andis gaurds are easier to learn on. They have less steps and they grab the hair a lot better than wahl gaurds. SC guards and the babyliss premiums seem to give a thicker cut than most imo. Although the amount of teeth they have helps out. Some guards cut better on some textures than others, but once you find what works with you and what clippers you like to use in combination, you find yo groove fasho.

[@LaBestiaRD]

Saludo desde Republica Dominicana 🇩🇴🎉💪 fuerte

[@TeeMoneyTight]

Always been an andis fan and no one can get me to change. I love their system. I have fade, taper, and phat blades. Along with an original 0 guard and two new OG guards

[@jeremymestizo4834]

I 100% agree. and one other thing is the material used for the Andis Guard is way smoother too. I feel that the Stylecraft guards don’t slide as smooth. But they are good. I do prefer the Wahl System

[@mrgoodbar216]

Like andis system but i get better blends with wahl system. Im old school i started with og masters before they had the purple magnetic guards. Now i only use the fade master when i use andis and thats only when im shaping a afro

[@ArabicReviewed]

MMA Barber Life even said this, the Wahl system is easy to get buttery blends with. They transition well in to one another

[@DanielMoreno-ft3il]

Can you do more haircut tutorials on straight hair textures

[@SwatBeatsOfficial]

Try the tight guards from SC

[@ArabicReviewed]

I doubt it though, he probably has been gifted them already by Gamma/SC but he hates Wahl system. He'd much rather blend it out with no guard lever open than use a tight Wahl style half guard.

[@coreydaniels101]

Stylecraft clippers with the Wahl premium guards. You go with what works best and feels best for you. The Andis Master would be the best clipper on the market, if they would update that motor and quiet it down.

[@ArabicReviewed]

Honestly if they just put that JRL motor in it, it 100% will be the best clipper. Or if they Oster Fast Feeds had a JRL style motor, it would be game over.

[@lylesahn5829]

I found that when I put the stretch bracket on my rebels I was able to get the line out easily with the zero guard.

[@BrandenLuisDiaz]

Nice video 📱

[@bonecrusherneal655]

Hi jeezy

[@kravethedream]

Babyliss FX+ or Babyliss FX One?

[@tyriq713]

I like Wahl guard system

[@hans.thebarber]

Thank you for this video.! I like Andis guards but how SC clippers look. 😂

[@mrcat1991]

Yo with this video being said,,, you definitely have to post a jersey video cutting with WAHL guards 😅😅😅😅

[@mrbrask818]

Gamma tight guards

[@Mike-hy8cs]

Stylecraft basically copied the andis guard system pretty well. The only issue to me is it isnt as smooth on the skin as the andis guards are. They use different materials. But stylecraft guards can fit on a majority of clippers whereas andis only works on certain andis clippers and oster clippers. But the stylecraft is thicker than the andis is.

[@marcuscaldwellsr.5541]

Can either of those go on the JRL clippers?

[@ArabicReviewed]

The Stylecraft/Gamma magnetic guards can, and the Andis SINGLE magnetic guards can too, not the double magnetics

[@j-dooelliott6307]

Andis guards system is the best! 0,1,2,3 and so on..no 1.5 guard..less steps, and guard durability is A1. Only issue is not many clippers can us the Double purple magnetic guards and I wish some of these brands would make a clipper that could without having to change the bracket

[@SenOcloo]

Just purchased and made StyleCraft apart of collection!

[@ashtonburns4132]

Right

[@russellreyes2741]

The stylecraft system works better if you have the stretch bracket on, it lets you open up longer so the 0 closed should transition better

[@Belloscutz]

Where does the Babyliss guard fall between the these two?

[@elhadjiba9727]

hi I live in 🇸🇳 Senegal there are no Andis products here, I use the Wahl 0.5 mm guard but if you are not careful, it will create another line with lever close . 🙏🏿🙏🏿 love barberlogy

[@mondio1224]

Been with Wahl since the 80s...

[@slackerzsincity8822]

Wahl and s/c tight guard

[@YDBlendz]

Can you do a video on the new masters and the new Andis blade

[@PistolP-md2le]

360!!!!!! TRY THE FADE BLADE WITH THE ZERO!! The faper blade just is not it wit those guards

[@quintessentialgrooming5285]

If the Andis Master is "supposed," to go from a 000 to a 1, you shouldn't even need a 1/16th Zero guard. The Zero or 1/16th guard was needed in the Wahl guard system because the Wahl blade lever open left a void between where it stopped cutting and the 1 guard with the Wahl blade lever closed started cutting. The same goes for the Wahl 1 1/2 guard. Before the half and 1 1/2 guards (as we call them) existed, most Barbers used either clipper over comb or detachable blades to get rid of those 2 lines. I always cut with 1 Wahl (zero gapped) and 1 Master (not zero gapped). I found out early that the Master lever open would take out the line left by the Wahl guard open and the Master open with the old Andis black 1 guard would take out the line left by the Wahl blade open with the 1 guard (before the 2 guard with lever closed). Then came the red Speed-O guards, and our problems were solved. That was the first guard system, to my knowledge, that had both a half guard and a 1 1/2 guard in their system. I stopped using the Masters at that point. I used those 2 Speed-O guards even after Wahl came out with there half and 1 /2 guard because both were so flimsy and prone to slipping off. I didn't start using the Wahl half and 1 1/2 guard until the premium guards came out. Around 2011 or 2012ish, I bought the Fast Feeds because everyone around me was using them. I purchased the purple magnetic guards to go with them. For those, you need the half guard and a 1 1/2 guard because that blade open, falls between a Master and Wahl fully open. I used the Spped-O guard as my 1 1/2 guard again, with those. If we're talking one clipper and one guard system to do a complete haircut, I prefer Whahl with the premium guards. If we're taking thee best 1/16th, half guard, I'd say the red Speed-O guard is the best, hands down. Its only downside is that it's brittle and breaks easily. But it definitely cuts the best, in my opinion.

[@jyamilbarber3504]

I like both Andis and Stylecraft system, but i use more stylecraft system. Andis Master and Stylecraft clipper the high level is different but if you put the stretch bracket on stylecraft clipper you are going to have the same sistem has Andis. me personaly y like it with the clicks. Following you since 2015 i like your worck

[@JayLay85]

Could we use these guards with TPOB?

[@ArabicReviewed]

The Stylecraft/Gamma magnetic guards yes, and the Andis SINGLE magnetic guards you can, NOT the Andis double magnetics

[@oceanxyz609]

There is nothing i repeat nothing like the andis fading system it just have my blends coming out looking fresh with minimal work even my colleagues does want to know the secret behind hiw i get my blends to come out looking blended my finally conclusion everyone is different and probably have a brand with different systems that work for them

[@ArabicReviewed]

Does your double one open blend into the two closed? I'm in the UK and tried to use Andis system and struggled What steps you do for a blend??

[@Fadechamberlain]

Phat master blade ftw

[@desmondmitchell5602]

My bro finally1 makes a better 0 gaurd

[@yuneeak]

👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽

[@puvic40]

Tight guards bro

[@LBeeLilStoner]

WAHL 🤟🏾👽

[@WazzyTV]

so the andis 0 guard can't fit on babyliss fxone lo pros?

[@ArabicReviewed]

Not the double magnetic ones. The Andis single magnetic 0 guard can, but that one is not pointy teethed like the OG zero guard, but is smooth and curved like a Wahl half guard. It's basically the reason why they re-released the OG guard as not many people were feeling the shape of the 0 guard Andis had put out. Not many people have this on KZbin, but there was however a single magnetic Andis 0 guard that had pointy teeth like the OG guard, I paid $100 for two on eBay. It's on one of S Craft Blendz's videos. I don't know why they stopped making that as it was essentially the exact same measurements as the OG Andis 0 guard, sharp and pointy teeth to rake/collect hair properly. They discontinued this good product.

[@crystalk3670]

Andis is a beautiful clipper I love 💕 it .

[@salvadorcervantes7210]

Andis guard system all day ...mixed in with the oster 76 detachable blades ...a beast with them and fast !!!

[@HaStyleakaMaddmane]

The Andis magnetic guards work on the fast feeds too correct?

[@sacodawson3348]

Yes, it fits perfect! I purchased mine from Andis website.

[@HaStyleakaMaddmane]

@@sacodawson3348 ok, I got some off Amazon

[@floyjoy7777]

I like to use the JRL half guard instead of my zero stylecraft guard, otherwise I use all the other style craft guards

[@ArabicReviewed]

Good combination. The JRL half guard gets as close as a Wahl half guard, so you won't struggle with any lines there

[@Elniniss]

It’s obvious since the andis opens up more your guide lines are going to be at a longer length

[@k2klipz]

Wahl for me

[@RazorRobb]

What about the Gamma tight guard🙈🙉🙊

[@WhatTheChef]

I use the . 5 S/C after I use the 0 clipper comb. I miss the original 0 andis clipper combs !!! I hate the new ones! I'm not a complete fan of the loud cordless masters.. we waited all this time for them.. and I really feel defeated by what they gave us... And yes I purchased the pink S/C 4-pack..

[@YDBlendz]

I don’t like whal clippers but I love there guards

[@5JetLife9]

I like wahl on straight hair but Andis system with coarse hair

[@chunt241]

@360jeezy The Andis guard has a little v shape if you look at it from the side an the stylecraft doesn't if I'm saying an seeing it right

[@pariswade3585]

Been here since 2014

[@cdfitts]

I like the Andis, but I use wahl as well.....

[@johnbishop5865]

That's the old zero Andis guard there is a new one check it out.

[@christheevangelist]

TOP 5 CLIPPERS JEEZY? ‼️‼️‼️

[@kendalgoode804]

The Andis "Original" Zero guard Teeth are a Little Thinner 🤏🏿.. But, I Luv The Andis Guard System.. 🔥 💯% 💣

[@PharaohTheBarber81]

Babyliss is cool but my go to is Andis. I don't like the Wahl guard system.

[@jessieroybal4196]

Nothing better then the andis original 0 and 1 magnetic guard...they both thinner then current 0 and 1 guards

[@DapperTez86]

That Wahl 0 guard gets close to. But I'm style craft guy but I'll put a 0 Wahl guard on my style craft

[@Mike-hy8cs]

the problem with the wahl .5 and 1.5 is they skip hair. They dont cut the hair flush they leave hair behind thats why on a good amount of hair textures you have to go over the hair multiple times before it gets it completely down.

[@DapperTez86]

To be a hunnid you right. I end up going no guard open anyway

[@natanaelsampaio4679]

Põe legenda em português 🇧🇷

[@nobleali3223]

Andis masters with the og purple guards!!!

[@anthonydixon69]

One might be a little more zero gapped

[@SamuelAVRILA]

Whal guard system

[@Fadeawaysbarbershop]

Put the master blade on the Instinct and redo the whole video

[@denniscollins9503]

Andis!!!

[@nyethebarber]

I don’t use zero guards dog 1/2 guard to the 1

[@abskates9149]

Draw near to Jesus and he will draw near to you

[@MerrittGrooming]

Andis Zero Single magnetic purple guard is better than the double magnetic. Argue with ya momma

[@loveyourfamily88]

Andis

[@juvaineboothe4668]

Andis all the way sir....

[@chunt241]

Never tried stylecraft guards

[@ebblokey6881]

I went back to using my andis because of this reason

[@Dollabill922]

Andis guard system is the better one.

[@eliezerberrios9521]

Andis 0 OG guard!!! There’s nothing like it!

[@emmanuelpettis7046]

These 6400 dollar subsidy scam ads are getting out of hand 😒

[@ngontrand72]

Jeezy, as a barber myself. This is a simple explanation, the Andis MASTERS are called MASTERS for a reason, there's level to this game. Just like there's barbers and there's MASTER BARBERS. As for Style craft they make good tools for every level. You just have to be honest with yourself and know where you feet in. You can't just be a level 1 barber and think you are going to pick up a MASTER clipper and make magic, you have to work your way to that level. Don't get me wrong I love Style Craft clippers, but people need to show respect when it comes to the Masters. Just like, you can't just get out of barber school and you want to start using HANZO SHEARS, you have to get to that level. Otherwise you'll cut your fingers right off.

[@jcramirez77]

Agree the sc 0 guard doesnt do the work, more teeth is better compared to the andis system but not every clipper takes the andis blade