Good video but you didn’t show or explain how to remove the lamp assembly! Do you just pull on it or is a twist lock type assembly?
@Chief1063 Жыл бұрын
I'm glad you called them incandescent bulbs instead of halogen. Lots of people think all glass bulbs are halogen filled. Nice video. An easier way is to peel back the plastic fender liners on each side in the wheel wells. But there's many ways to accomplish the same goal. 😁
@lylejohnston4125 Жыл бұрын
Luckily, I'm working on someone else's car so, I can just torch a hole in the fender!
@nickgavella2044 Жыл бұрын
im going to do it your way, taking out the battery is crazy, then you have to reset your radio
@GlenHyden Жыл бұрын
Remove the fender cover 2 clips. 1/4 turn the side marker socket. Tight spot but WAY easier.
@jgriffeth12 жыл бұрын
Video starts with “so I got my Subaru Integra here”…really? Lol!
2 жыл бұрын
Lol
@RCGshakenbake10 ай бұрын
It's like the Acura Impreza.
@intouch87892 ай бұрын
😂
@HackMassacreАй бұрын
😂😂😂😂😂
@logan53262 жыл бұрын
All you had to do before disassembling half the vehicle was to take off the black side upper plastic like fender that have 2 clips on. This way you can stick your hand from the side and have better access to those pain in the a$$ light bulbs. The other trick is to move your wheels (right or left depending which light bulb side you are working first) inwards. Remove the wheel well plastic cover with the 2 clips off, move outwards part of the fender and stick your hand for better access. Same procedure goes to the other side.
@yosefyitz Жыл бұрын
Thanks for that. What a time saver.
@RVNT9OE8 ай бұрын
I'll try this cause this looks like a pain in the ass
@ailurodragon2 жыл бұрын
At the end, the ad for another video covers up the image of the right side marker lamps - diminishes the effect of seeing it replaced.
@spicylou Жыл бұрын
I am thankful for this video. Easy to understand!
@zackw49412 ай бұрын
The top marker socket has that funny slot so that you can turn it with a flat head screwdriver from an angle. Can't reach it from the bottom.
@MileHighMagic42069 Жыл бұрын
Kick ass tutorial. Thank you!!
@PoolarityChannel2 жыл бұрын
Amazon Link to the LED bulbs - amzn.to/34Am67O 00:00 - LED Light Bulb Type 00:37 - Right Side - Remove Air Filter Housing 01:55 - Location of 2 Bulbs 03:20 - Left Side - Remove Battery
@JamesWagner1 Жыл бұрын
He skips the hard part, releasing the retaining clips on the upper bulbs. I used a 90 degree pick to release the clip on the back side of the bulb. I recommend destroying the clip afterward. They serve no purpose as the bulb is twist fastened in place.
@expocon1 Жыл бұрын
Perfect explanation!Thanks a lot.
@PRIME0242 жыл бұрын
I didn’t know Subarus make Integras or Acuras make Imprezas lol
@logan53262 жыл бұрын
That’s nothing….I got a Ford Camaro! lol
@GGz_USI Жыл бұрын
You didnt explain how you got the bulb out if its a button or twist or pull straight off cause that info is vital knowing it could cause damage doing it the wrong way
@nickgavella2044 Жыл бұрын
its a twist off, counter clock wize
@dejan46662 жыл бұрын
you need to be describe how to take it off and off instead of telling me how to put it back on lmao
@jefftarantino99542 жыл бұрын
Right, is it a clip or do you twist the whole plastic lamp holder?
@RushHourLeee2 жыл бұрын
this is what i need to know 😂
@JamesWagner1 Жыл бұрын
Lower one is a twist. The upper is double clipped, then a twist. The clip is difficult. I used a 90 degree clip up get the back side. Then destroyed the clip on purpose. The twist function is all you need.
@glennmartin3415 Жыл бұрын
From what I have been told you should wear cloth gloves when changing the bulbs because the oil on skin shortens the life of the bulbs.
@yosefyitz Жыл бұрын
That only applies to halogen bulbs that get really hot, like headlights. I think.
@anthonysalmon99652 жыл бұрын
Which year is this impreza ?
@PoolarityChannel2 жыл бұрын
2014
@brianshouldis50872 жыл бұрын
I can’t reach mine
@op49508 ай бұрын
Like extracting a bad tooth 😔😔😔😔😔. Subaru makes EVERYTHING hard to DIY.