Subaru outback code P0026 and P0028. Easy and cheap fix.

[@dski6614]

Thanks for the video The oil pressure switch was leaking exactly as described problem fixed

[@777yert]

The torque spec is 12.5 ft/lbs

[@Mickeystyles1]

I have a feeling i cracked the tread piece trying to torque it. I left it alone for now. Its not leaking. Its better to just tighten it regular and not risk the torque.

[@chenupy77]

Thanks for the details and post and have 2006 Outback and got the P0026 , Have to try to replace the oil switch, Hope it worked for you

[@Nashharis8758]

Yes, it certainly was the oil pressure switch. The codes never came back after replacing it.

[@chenupy77]

@@Nashharis8758 That is Awesome, Thanks i did the oil switch today and not the VVT and replaced new oil and feel like its driving sluggish not smooth .

[@drivewayhero]

You didnt show how to test solenoid

[@777yert]

You should have used a slither of Teflon tape instead of gasket maker

[@KevinSmith-jp3vn]

What scan tool are you using ? Expensive ?

[@Nashharis8758]

Autel elite it was around 2800 with a 2 year subscription.

[@RichardCampbell-pm4fx]

I got 2010 subaru forester and I got one locked out my awd so if I replace both would it give me and back and tractioncontrol light off the dash

[@Nashharis8758]

This should not have anything to do with the AWD system. What is the fault code?

[@RichardCampbell-pm4fx]

@@Nashharis8758 po741 torque converter clutch solenoid circuit performance or stick on and other po700 transmission control system mil requests i am stuck figuring awd to work let me know so I can fix it

[@Nashharis8758]

@RichardCampbell-pm4fx that would be related to your valve body inside the transmission. You can replace the solenoids, but I'd just get a new valve body or a used transmission from a junkyard.

[@Americansikkunt]

Do you have to replace the Oil Pressure Switch AND the VVT? Or just one or the other?

[@Nashharis8758]

Just the oil pressure switch

[@Americansikkunt]

@@Nashharis8758 that is much easier! Thanks.

[@CouldntThinkOfaUsername]

What’s the part that you replaced called? I’m trying to find it on auto zones website

[@lucifercrow7050]

is 1800 idle rpm normal

[@mikejames5546]

First start is not bad, but once the car warms up it should be 650-800.

[@joanapplewhite7691]

Sudrau GJ is cranking but not starting. Wants to sound like the timing belt has bust but its not. What's your sugestion or can you help solve the starting problem?

[@Nashharis8758]

Start with checking if you're getting a spark by removing the spark plugs and testing it with the spark tool. If the spark is good, then move on to fuel, could be a bad fuel pump. If those tow check out good. It could be your crankshaft sensor.

[@workinginamerica]

Absolutely no reason to remove the air cleaner. EZPZ to access it with a long 24mm socket.

[@Nashharis8758]

For the sake of the video, I had to for better footage

[@workinginamerica]

Ah, good point. Great video, thanks!