Subassembly Composer Pt. 8 - Using Decisions to Define Multiple Options

[@harleyasimpledesigns2806]

Well explained. I've been searching this topic for a while. Thank you.

[@vascomwalongo2427]

Awsome Tutorials. I am learning Alot here

[@echawia]

thank you so much for sharing with us your precious knowledge and advices

[@JeffBartelsCAD]

So nice of you, thank you Amir!

[@rickyernest5289]

U re d' best, tq 4 this video.. It's really usefull 🙏

[@JeffBartelsCAD]

Thanks Ricky! So glad to hear the content is helpful!

[@AhmedGamal-ul6jc]

Please, I need an explanation for making box culvert, and the walls need to be made at a variable angle

[@mirakbar4035]

Hi Jeff - I have created same subassembly following your example. but my shoulder and ditch does not follow the superelevation criteria. - would you please let me know how to fix it?

[@esmailmahmoud636]

thank you so much for sharing , I would like to know How i can do box culvert with wing by subassembly composer

[@vascomwalongo2427]

Jeff, ur ar the best

[@muuyuumunkhbat7924]

Best teacher

[@JeffBartelsCAD]

Muuyuu Deedee Thank you!

[@Treed170]

Jeff, I have a dumb question. I am trying to create a subassembly that basically targets two surfaces. I need it to project a slope @ -3:1 as far as possible from my design surface, then conclude at -0.25:1 to an offset parameter which is 2' off PL (basically to make a crib wall with as minimal a height as possible). I have tried composing with aux points but with no avail. I tried working from the bottom (EG) up, and from the top (FG) down. My work around has been project a grading object past the wall at -3:1 from FG, then us an assembly with a link to surface w/ slope assembly to FG surface from 2' off PL, see where it daylights, extract a feature line from the corridor, explode the dynamic line, convert back to feature line and Infill. Even that has been more challenging then I imagined. Any help on this matter would be amazing.

[@AbhijitChakraborty103]

Hi Jeff, is it possible to put a bench at a fixed height above the Ground using stock subassemblies?

[@razar6578]

what about if i say ap1.y>0 it will be in cut other wise be fill ? it's also work or it's wrong ? ap1 is relative with p2

[@DoIKnowU1]

i dont understand why i need the code point and the code link...what it's meaning for me how to impact the subassembly?

[@jerumviernes4209]

Hi jeff , the assembly of cut and fill are not showing in the cross sections.. How to fix it.. Thanks

[@quanOSU]

It’s usually due to missing (surface) target.

[@bekatchigladze541]

Hi jeff Could you upload video how to create Tunnel using Civil 3D and subassembly composer??

[@mohdfadhil8408]

hi Jeff could you upload video how to create multiple daylight up to 7 berm with non flat EG surface or target using Subassemblies composer and civil 3D.. tq..

[@aubrey7460]

My link from P2 to P5 is not showing. is it a bug? I entered the exact argument