SUBD - Organic Interior Rhino 7 - Grotto Sauna

[@oB19o]

SubD's are magical

[@pleasecomment4470]

Please do make a vidio on rendering part thanks ! Would like to learn about rhino rendering technique. Thanks 🙏

[@_DevangNishar]

Thanks, Adam.

[@arquitecto9186]

excellent video, I would like to know how I can see the divisions between each face, as if it were an embedded wooden plate

[@Renzsu]

Haven't used Rhino in ages, but I'd imagine you can convert the sub-d's to nurbs and use the resulting surface boundaries as a starting point.

[@jaehoc]

Very beautiful!! Very nice work!!

[@AdamArchh]

Thank you

[@mohirjonvohidov1999]

ADAM GIBI ADAM bu ADEM!

[@AdamArchh]

Eyvallah

[@manuel.camelo]

YES ! Exactly wtf I was looking for. 👁️👁️👃👁️👁️ 🙏

[@FaretraDesign]

Great! I really enjoy your channel!

[@AdamArchh]

Thank you Vasilis, for your support.

[@FaretraDesign]

@@AdamArchh It would be nice if you are some more product design videos (like furnitures, lamps, electric devices etc)

[@AdamArchh]

I will be sharing much more content soon. Since I am an interior designer, I will mainly share product models.

[@onegraph1c]

YOU ARE MASTER

[@AmirAhmed93]

Amazing tutorial 💙

[@AdamArchh]

Thank you so much

[@carlosortega5416]

Your tutorials are gold!... thank you so much.. I have a problem... in the min 10:51, I cant use the tool "insert SubD edges" in group... i select the three faces, but when i use this tool... it apply the tool for separated... not in group how u made it.... any idea why?-.... thank you!

[@AdamArchh]

Hi thanks. If I understand you correctly, your problem should be: After pressing the command, there are single or group options in the command panel, change it.

[@carlosortega5416]

@@AdamArchh thank yo for your answe!...I though it was the solution, but the only command in the panel after pressing the comand and select the three faces is "insert distance"..., i dont know how do to select that option :(

[@AdamArchh]

If there is no group option, there is no solution, but there is an alternative, although not very good. Wipe the inner edges one by one, make the floor a single surface and then apply the action you want.

[@carlosortega5416]

@@AdamArchh finally i found a solution!... i just selected the faces and used de point under the arrow! ... thank you for your time Adam!

[@manuelespinoza4252]

@@carlosortega5416 thank you so much Carlos!

[@mirlorojo86]

Mas ejercicios con Sub D por favor tenga la bondad

[@hyacincce]

Thank you for your tutorial! But how did you select each points , curves, surfaces??? If I drag my modeling I can't select it seperately

[@AdamArchh]

Thank you. Hold Ctrl+Shift and select.

[@GreenFoxLuama]

@@AdamArchh You should have noted which key you used in the video. I kept looking for an answer to this on different online platforms for half an hour

[@nguyenphuonglinh6394]

Hi Adam I love your videos but can you show me How do I stretch it because I don't see the circle on my computer 1:42 ?

[@AdamArchh]

Hi ,thank you, first enable the ''Gumball'' and hold Ctrl + Shift to select an edge

[@marotovspasmoso]

Ey, thank you for tutorial. How did you make the vray wood joints in the edges?

[@AdamArchh]

Thank you too. I use 3Ds Max-Corona for rendering.

[@marotovspasmoso]

@@AdamArchh ooh, i never used it, does it have an edges option? Or have u make the effect in postproduction? Thanks

[@AdamArchh]

Unfortunately, you can do this after selecting the border lines and cutting them with split.

[@doradozyli571]

so cool ! thx sir

[@AdamArchh]

Thank you too

[@nima5657]

Hi nice video! But how did you get the final geometries to render? How did you separated the joints - the black curves in-between the wooden panels? thank u

[@AdamArchh]

Hello, thanks for the comment. I did not physically separate the wood panels from each other. I just used a visual splitter using the command from Subd tools (SubD Multipipe). I need to make a separate tutorial video to create gaps between wood panels or to produce slabs. I translated this comment.

[@nima5657]

@@AdamArchh Thank you for your reply! Yes, please make a video on how to make gaps. So you applied pipes on those edges but how did u extract the edges of the faces? Also may I ask how did you do those thin parallel cuts on the seat? Thanks!

[@raywong3184]

@@AdamArchh yes. please. like how you extract the curvy lines for pipe. as well as how to make the gaps between panels but remain the smooth, like no crease I mean.

[@pleasecomment4470]

@@AdamArchh Hello Adam did you make the tutorial video on creating gaps if yes can you please put a link in the reply.Thanks

[@dhiya_eddineghezali1666]

extraordinary, I have a problem in the last step, the trim option does not work with me, when I select the shape w I click on trim, to make the openings, no longer works

[@AdamArchh]

Thanks. Try split. Or DupEdge the edges and use it as a cutter.

[@dhiya_eddineghezali1666]

@@AdamArchh thank you 🙏❤️

[@ararunkulkarni]

Nice , thanks

[@AdamArchh]

Thank you too

[@yonelvm]

thank you

[@AdamArchh]

Thank you too.

[@Danielbede1]

Hi Adam, I've joined your channel and trying to find the files to download for this project, but can't see them anywhere. Is it possible to share them or post in membership area? Starting to look through your other work - great stuff! Thanks!

[@AdamArchh]

Hi Daniel, I will send you the file from Insta. My computer is not with me right now. I will send it today.

[@Danielbede1]

@@AdamArchh Legend! Thank you!!

[@kubrataskiran1948]

Hi Adam, I can see the files under 'Membership' but I wanted to download this specific model and I can't find it. Would you be able to share it with me? Thank you! @@AdamArchh

[@AdamArchh]

​ @kubrataskiran1948 Hi, of course, can you contact us on Insta: @AdamArchh

[@jamesepicmamba]

How does subD work when applying textures and materials in rendering programs? How can I collapse it by material if the form contains multiple materials?

[@AdamArchh]

This depends on the situation. In Rhino 6-7 it can be done from the material settings.

[@jamesepicmamba]

@@AdamArchh do you explode certain parts to change material or do you make a completely separate form?

[@canciftci3013]

En son dış cepheyi dikdörtgen prizma yapmak yerine şeklin kendi organik halini kullanmak için ne yapabilirim? yani dış cephe için şeklin organik halini kullanarak nasıl duvar kalınlığı verebilirim?

[@AdamArchh]

Offset SubD yapmalısınız. Ya da pencerelerden itibaren dışa doğru modellemeye devam etmelisiniz. Köşeleri de Crease ile düzleştirmelisiniz.

[@canciftci3013]

@@AdamArchh Teşekkür ederimm

[@canciftci3013]

bir sorum daha olucak, bıraktığımız açıklıkları (pencereleri) cam yapmak istersek nasıl yaparız?

[@AdamArchh]

@@canciftci3013 ExtractSrf ile ayırıp materialini değiştirmek zorundasınız.

[@JamStewAkuryou]

If rhino 7 has existed in 2010 i would have done my thesis in one tenth of the time i did

[@AdamArchh]

Challenges have made you stronger.

[@RafaelFerreira-dk3lg]

very good video. I have a doubt, as you managed to render with the lines of division of the subD as if they were the joints of the material

[@alessandromanno1841]

Idk y but i cant select the vertexs of Subd, it keeps selecting it all

[@AdamArchh]

Ctrl + Shift

[@alessandromanno1841]

@@AdamArchh thanks ahahah

[@Pablo-oy7hz]

Hay forma de tener el rhinoceros 7, pero gratis??

[@AdamArchh]

You can use the evaluation version.

[@Pablo-oy7hz]

@@AdamArchh esos duran 90 dias, yo lo quiero para siempre, pero igual gracias por el dato

[@sam1hg644]

how did u render it?

[@AdamArchh]

Hello, the images belong to a real project designed by Partisans. An in-progress video: - kzbin.info/www/bejne/rmeypmOQis1qn80&ab_channel=Schreinersicht

[@sam1hg644]

@@AdamArchh thank you

[@YTAliasJoeCool]

no door at al, LOL

[@elcurvo]

!!!!!!!!!!

[@maximilianstjernstrom7397]

ADD SOME MORE XPLAINATION MAN! CPOULDNT EVEN GET 1 MINUTE IN

[@wenyangliu8285]

Blender is easier than it.

[@AdamArchh]

Each of these parts must be produced. Can blender models be produced?

[@wenyangliu8285]

@@AdamArchh I think so.