SubiSpeed - Rally Armor Mud Flaps Installation for 2015 WRX and 2015 STI

  Рет қаралды 273,978

SubiSpeed

SubiSpeed

Күн бұрын

Пікірлер: 178
@shawnriv9
@shawnriv9 9 жыл бұрын
My black/blue mud flaps are arrive today for my 2016 WRX. I was super excited then remembered it's 10 degrees outside (I live in New England) and shouldn't be too much fun my first attempt to install mud flaps.
@Spartikus2007
@Spartikus2007 10 жыл бұрын
Great video. The small bends that you mention on the back really help with the fit in keeping the flap level with the ground. One easy cosmetic option that I did on my install was use plasti dip to turn the silver screws from Rally armor black. A few coats on the head of the screws match the flap quite well and still allow for the screws provided to be removed if need be.
@SubiSpeed
@SubiSpeed 10 жыл бұрын
Nice touch with the screws!
@JJ-rf7dg
@JJ-rf7dg 4 жыл бұрын
Where can you get plasi dip?
@blakeangell385
@blakeangell385 3 жыл бұрын
@@JJ-rf7dg any store
@bfrazell
@bfrazell 9 жыл бұрын
Not sure if anyone pointed this out and perhaps I missed it, but I feel like you neglected to add a UClip on the back bracket. I just installed these last night after watching the video and using the supplied directions.
@StevenFreeman
@StevenFreeman 9 жыл бұрын
bfrazell Same here man. I thought I missed something but I am glad I grabbed the instructions.
@karn1voree
@karn1voree 9 жыл бұрын
+bfrazell yup same here. lol.. then it was too dark to fix them so i just took them off and time to do it tomorrow :(
@karn1voree
@karn1voree 9 жыл бұрын
+bfrazell LOL he forgot to put it on and then it just appears in the next step...
@junolena
@junolena 7 жыл бұрын
Yeh i had to take it out and put u clip in.
@MrMcbear
@MrMcbear 3 жыл бұрын
If you tape off and plasti-dip the hardware after install it not only hides the hardware, it protects it from rust if you live in a snow area
@dsonyay
@dsonyay 8 жыл бұрын
not very good guys... you forgot to install the clip on the rear so you can install the screw through the flap.. you made it appear it is not needed as you screwed in the screw.
@zangief12inch
@zangief12inch 8 жыл бұрын
dsonyay doing my mud flaps right now and yes they did I was confused as to why I had to clips left over, thanks for pointing it out.
@fanousontheloose
@fanousontheloose 8 жыл бұрын
just made the same mistake myself smh
@j.s.3414
@j.s.3414 6 жыл бұрын
dsonyay learn to read. They send directions for a reason.
@jorgitogaitan
@jorgitogaitan 6 жыл бұрын
Yeap. Did that too following video. I then looked over and noticed 2 more clips which then made me undo rear. Quick fix
@marcopadilla8933
@marcopadilla8933 6 жыл бұрын
This screwed me up
@AoDAzrael
@AoDAzrael 8 жыл бұрын
One trick for folks that don't want to jack the car up/remove the rear wheel - if you have a 1/4 SAE wrench (or even better, a 1/4 SAE ratcheting wrench) then you can use that in conjunction with a philips drill bit to tighten screws in areas with extremely low access for even the stubbiest of regular screwdrivers.
@jlm897
@jlm897 4 жыл бұрын
Looks easy and neat when YOU doi it! There'll always be some to criticize, but your explanations were clear and clever. Thanks!
@almo2171
@almo2171 9 жыл бұрын
great video. The mud flaps look great on any color WRX or STI and make the car look a lot nicer and sportier. However, to me at least, $172 is too much for these. I wish they were less expensive, but rally armors are much better quality than say rock blocks.
@cherobinson6371
@cherobinson6371 9 жыл бұрын
+Al Mo either way? put em on !!! Subees gone way cheap on paint these days ...super thin!!!
@j.s.3414
@j.s.3414 6 жыл бұрын
Al Mo $172.....or $500 for paint repair.
@dannybarahona6507
@dannybarahona6507 3 жыл бұрын
Get the universal Rally Armor ones for 25 bucks. Just need to drill your own holes.
@millhouse313
@millhouse313 3 жыл бұрын
I mean if you bought a subie, 172 is cheap. Maybe get a Chevy Malibu if 172 is a lot to you.
@SocietysChimera
@SocietysChimera 7 жыл бұрын
Pro Tip: To do this without removing the rear tires (stock size) you can easily tighten down the screws if you use a 1/4 apex #2 and a 1/4 gear wrench. Also an offset would most likely work, just slightly more annoying.
@Legion828
@Legion828 7 жыл бұрын
Good video but: 1) forgot the U clip for the back bracket 2) the plastic clips that hold on the fender liner on the front aren't necessarily unscrew-able. You have the twist the inside a quarter turn while keeping the outer housing stationary.
@xWARxMACHINE
@xWARxMACHINE 7 жыл бұрын
C.S. Patch I love you
@michaelbeers9775
@michaelbeers9775 3 жыл бұрын
God damn i wish I saw this comment before I broke 2 clips
@michaelbeers9775
@michaelbeers9775 3 жыл бұрын
I take it back, the clips don't go back in, crisis averted
@Qazxswer68
@Qazxswer68 3 жыл бұрын
I know I'm late to the party but he didn't, they edited it pretty good 👍
@BloodwolvMC
@BloodwolvMC 3 жыл бұрын
Fcuk. Would have been nice to see this before I broke the bottom clips. Glad I don't need to reuse them.
@dsskuzltd
@dsskuzltd 10 жыл бұрын
Hey you forgot the clips in the back the middle screw needs the clip or it won't screw in.
@ThuGfunk
@ThuGfunk 10 жыл бұрын
Just got a 2015 Impreza (*not wrx*) - and just bought some. I assume the installs the same. Thanks man!
@davidayuso2815
@davidayuso2815 4 жыл бұрын
They are
@heatherreich2687
@heatherreich2687 Жыл бұрын
Thankyou I just needed someone to show me. I think I can do it myself now. ❤
@motomuscl3
@motomuscl3 9 жыл бұрын
one important aspect that made this take 3 hours is in the video he didn't use a c clip in the rear.... I know the instructions are there but going by this video, he forgot a huge key. all in all got it on..you'll need to take the rear tire off to tighten down nuts in rear
@joeynickerson3741
@joeynickerson3741 7 жыл бұрын
motomuscl3 I used a Phillips head and a pair of pliers, worked like a charm
@bignoe1453
@bignoe1453 5 жыл бұрын
You can tighten the the bolt with the mud flap on before putting the bracket inside your fender liner to save your self having to take off your wheel
@chrimoowah1401
@chrimoowah1401 3 жыл бұрын
Do a video of installing fender liner on 2015 sti
@chungungo5418
@chungungo5418 2 жыл бұрын
Will this brand of mud flaps work with my 2016 Subaru Impreza sedan? Throtl said they're universal for my car but I want to make sure before I spend $160.
@aaawoo123
@aaawoo123 7 жыл бұрын
So i broke the top part of the fender liner clip up front and its stuck in there. Anyone know of a good way to get the long narrow part out?
@Yotafam1911
@Yotafam1911 5 жыл бұрын
It’s not as simple as they made it seem, They edited out the parts that most people will struggle through, but they got the main point across
@arhajiismael
@arhajiismael 8 жыл бұрын
Will these fit with the OEM rear quarter under spoiler and the OEM side underspoilers?
@WedgewoodGarage
@WedgewoodGarage 3 жыл бұрын
My rears point more toward the inside of the car. Any way to make them look more straight from the back?
@miguelgalicia9180
@miguelgalicia9180 9 жыл бұрын
Red flaps with white lettering just installed on my 2015 WRX STi in WRB. They add to the red accents nicely. Price was a bit steep for them though. Hopefully they last me a long time :)
@j00-s5y
@j00-s5y 10 ай бұрын
Both sides on mine stick out too much at an angle . Ever since it snowed they got worse, any advice ?
@JJ-rf7dg
@JJ-rf7dg 4 жыл бұрын
That looks great. I'll have to get them. BTW, I would paint the screws black for an added touch.
@LuisGarcia-wg1bl
@LuisGarcia-wg1bl 6 жыл бұрын
The rear mud flaps don’t align at all with my 2018 Subaru wrx sti, I’m not sure what to do at this point.
@SubiSpeed
@SubiSpeed 6 жыл бұрын
Luis, Have you contacted our support team? Please contact them with your order number and we can assist. www.subispeed.com/contacts/
@SMoss98
@SMoss98 3 жыл бұрын
Will rolling your fenders effect the fitment?
@baymeosplit8537
@baymeosplit8537 10 жыл бұрын
When you put the rear wheel back on, is there a certain amount of torque you need to apply to the lug nuts?
@ThuGfunk
@ThuGfunk 10 жыл бұрын
Usually 100 flb/torque
@baymeosplit8537
@baymeosplit8537 10 жыл бұрын
Mike Thank you for the reply, Mike but I referred to the owners manual and it was way less than 100. I think it was around 49 or so.
@RocketTofu93
@RocketTofu93 8 жыл бұрын
Help! One of the fender liner clips wont engage with my screwdriver, it looks worn out. Any advice on how to get it out?
@SubiSpeed
@SubiSpeed 8 жыл бұрын
Once the top is disengaged, I would recommend some pliers to grab hold and pull that sucker out!
@josemendoza4645
@josemendoza4645 5 жыл бұрын
Do you guys happen to know how to tell if the bracket fitment is for 2015 or 2019s because I ordered some 2015+ but the holes don’t quite line up. I also have the rear OEM guards that make it hard to try to install but I don’t want to take them off since they are applied with adhesive from factory.
@paulmarsdensr8199
@paulmarsdensr8199 4 жыл бұрын
A great video. I will now think about installation of Rally armour mud flaps. Thank you Subiespeed and stay safe out there guys and gals. Subies forever.
@IvanDiaz-mx1so
@IvanDiaz-mx1so 9 жыл бұрын
I'm having trouble removing the front clip on on the front tires the first two come off the last one on the buttom doesn't com off
@McPerferct
@McPerferct 2 жыл бұрын
Anyone tried fitting these with the subaru oem rear spats? Spats stick out in the wheel arch
@tomcharles2289
@tomcharles2289 9 жыл бұрын
The bottom screw on the front doesn't seem to tighten. I've got the clip and spacer in there, but on both the left and the right it doesn't get tight. Any ideas?
@PlainBanana
@PlainBanana 9 жыл бұрын
which side of the washer that that's facing out ward?
@dtbeachbums
@dtbeachbums 10 жыл бұрын
So clean! Nice install looks great!
@chrisgriffin7357
@chrisgriffin7357 5 жыл бұрын
Considering I had to do it in 1 degree weather in the snow, on coilovers with no jack, I'm glad I used the directions included and didn't forget to put the u-clamp on the rear bracket like they did in this video.
@bryanbunag4120
@bryanbunag4120 7 жыл бұрын
Installed these on my 2016 WRX yesterday, but having issues with the rear tires rubbing on the nuts whenever I go over a bump. I'm currently running on Bridgestone Blizzaks 245-45R19 (winter tires), but with the stock summer tires on, I shouldn't have any problems. Any suggestions on how to stop it from rubbing with my winter tires on?
@noahjacob424
@noahjacob424 3 жыл бұрын
You ever solve this issue?
@monfero01
@monfero01 8 жыл бұрын
If u dont mind whats the size of wheels and tires? Thanks 👌🏻
@giodudley8988
@giodudley8988 8 жыл бұрын
what size are the bolts/screws to the front mud flap?
@androclesx704
@androclesx704 6 жыл бұрын
how hard is it to remove these after install? What I mean is, When I unscrew the mudflaps, are the plastic clips going to fall inside the cars molding? I forgot to put a clip on one of the front flaps but I'm afraid of unscrewing them thnking the clips will fall off then I'll have to tear apart the whole side of the car to get them otherwise I won't be able to put the flaps back on and they'll be useless without the clips.
@SubiSpeed
@SubiSpeed 6 жыл бұрын
Clips shouldn't go anywhere even when uninstalling.
@afluffypanda94
@afluffypanda94 10 жыл бұрын
Will this fit the 2014 Impreza base model? I figured since the WRX is still an Impreza it would be compatible. Please clarify if I am correct or not?
@cherobinson6371
@cherobinson6371 9 жыл бұрын
+Brylle Martin just be carefull with the 2014 with your paint,super thin on those models!!! scratch sooo easy,definatley will benefit from mudflaps...,hey well down there hit your rocker underside with some paint cause Subee didnt...
@scobbybizkid
@scobbybizkid 10 жыл бұрын
Thanks for the very easy to follow visual aid ,can I assume the process to be the same on my Hatch ?
@burfloater
@burfloater 10 жыл бұрын
Did you notice the awful edge on those mud flaps? Did they cut them out with a wood saw?....
@cherobinson6371
@cherobinson6371 9 жыл бұрын
+Burfloater hahah
@rjhocky
@rjhocky 9 жыл бұрын
Do you think these will tear it dry out and Crack over time?
@SubiSpeed
@SubiSpeed 9 жыл бұрын
These are made of very high quality materials that will last for a very long time. We've had ours on with multiple track days and have had no issues,
@Jinroth
@Jinroth 8 жыл бұрын
Guessing you can't install the rear mud flaps if your WRX has the OEM Rear Aero Splash Guards?
@DustinB855
@DustinB855 8 жыл бұрын
Yes you can just have to do some slight modifications
@Jinroth
@Jinroth 8 жыл бұрын
***** Yes, I have since installed the mudflaps over my aeros.
@stevenelson5860
@stevenelson5860 8 жыл бұрын
Did you find some instructions online for that?
@DustinB855
@DustinB855 8 жыл бұрын
+Steve Nelson go to my wrx channel they did it on the white wrx
@Jinroth
@Jinroth 8 жыл бұрын
Steve Nelson Don't need instructions, just remove the aeros, put the mudflaps on and then reinstall aeros.
@trentmarr90
@trentmarr90 Жыл бұрын
Me to moving my front one because I didn’t think to turn it because my clips kept popping loose and I was getting frustrated as shit. Not even that hard of an install compared to what I usually do but damn tell me why this shit sucked to do😂
@gustavocortez3109
@gustavocortez3109 5 жыл бұрын
Ordered some mud flaps and not all the screws and nuts were dilivered
@markborreta7407
@markborreta7407 6 жыл бұрын
2018 wrx model would this fit
@_zombiewrx_9225
@_zombiewrx_9225 9 жыл бұрын
Weird question, what the name of the song playing during the video?
@JJ-rf7dg
@JJ-rf7dg 4 жыл бұрын
its in the link.
@billstanley1375
@billstanley1375 8 жыл бұрын
I can't even get my fender liner clips out LOL. They just keep spinning and spinning.
@xWARxMACHINE
@xWARxMACHINE 7 жыл бұрын
Bill Stanley me too man, me too
@morganjames13
@morganjames13 7 жыл бұрын
you hold the outside in place and then turn the screwdriver, they come out easy then
@cjbr1989
@cjbr1989 5 жыл бұрын
@@morganjames13 unless one is stripped and you have to spend like an hour figuring out how to get a stripped out plastic clip off your fender liner. The answer, if anyone needs it, just break the fkn thing.
@_k808x__6
@_k808x__6 4 жыл бұрын
What helped me was to hold the clips with one hand apply pressure and other hand to screw they come out pretty easy
@darrenhernandez2459
@darrenhernandez2459 5 жыл бұрын
Im having the HARDEST time popping off the fender liner clips!!! PLEASE HELP im using brute force and they wont pop out no matter how much i have loosened it!!! I dont wanna damage my car
@DoomPatrolTV
@DoomPatrolTV 6 жыл бұрын
Trying to install on my 2019 and the s clips don't fit in the holes. Should I return?
@jesusortiz1490
@jesusortiz1490 6 жыл бұрын
DoomPatrolTV yo did you end up returning them or did you get them to fit?
@MaulKiller54
@MaulKiller54 7 жыл бұрын
Are there any issues installing the RallyArmor mudflaps as well as the HT Autos Rear Spats? It seems like there might be some interference there with one of the clips.
@SubiSpeed
@SubiSpeed 7 жыл бұрын
No issues on our car.
@blazers12369
@blazers12369 6 жыл бұрын
where could I get those skrews for the front
@JustAnotherPersonHere
@JustAnotherPersonHere 10 жыл бұрын
Thanks for including all the install details.
@jreeder13
@jreeder13 7 жыл бұрын
Will these fit a 2017 STI with rear Aero splash guards?
@SubiSpeed
@SubiSpeed 7 жыл бұрын
Yes
@fawkesypoo
@fawkesypoo 8 жыл бұрын
Is it possible to install the rear without lifting the car?
@SubiSpeed
@SubiSpeed 8 жыл бұрын
+Fox Stowe If you have the correct tools, yes.
@shortspecialbus8333
@shortspecialbus8333 8 жыл бұрын
In my case, with standard 245/40R18 tires, I was able to do it fine without lifting the car or removing tires. I used a normal 11mm craftsman wrench for the nuts, and had no issue, and for the screw in the center I used a 18" screwdriver that I have. It allowed it to be straight enough and held well enough that I was able to get the screws plenty tight without trouble.
@blazers12369
@blazers12369 6 жыл бұрын
Do you guys have any front bolts/hardware I can purchase
@MarkDMaruska
@MarkDMaruska 8 жыл бұрын
My tabs stripped? How do I get them off
@Kaz8693
@Kaz8693 7 жыл бұрын
WHAT RIMS AND WHEELS ARE THOSE?
@thegetreal69
@thegetreal69 9 жыл бұрын
would the install be the same for a 2011?
@KindaSortaGood
@KindaSortaGood 8 жыл бұрын
+thegetreal69 I know this post is 4 months old, but install is different on a 2011. Same principle, but some extra steps.
@mannylopez1118
@mannylopez1118 9 жыл бұрын
Does anyone know if the 2008 models will fit on the 2015?
@ZealousHangar
@ZealousHangar 9 жыл бұрын
+Manny Lopez Youre joking...
@erichcarpenter1697
@erichcarpenter1697 5 жыл бұрын
What’s that rim setup?
@SemperFi850
@SemperFi850 9 жыл бұрын
Will these work on a 2016?
@TheConservativeCanadian
@TheConservativeCanadian 9 жыл бұрын
yes i just installed on my 2016 WRX
@cherobinson6371
@cherobinson6371 9 жыл бұрын
+wwwBroadcasts is the paint on 2016 as thin as 2015? 2015 scratch super easy and so many areas no paint at all!!!
@TheConservativeCanadian
@TheConservativeCanadian 9 жыл бұрын
+Che Robinson yep not the best paint I've ever had on a vehicle
@YetiShred
@YetiShred 8 жыл бұрын
My RA mudflaps sucked. lasted one winter season.. after a couple winter storms the bracket bent then broke in the rear.. RA didn't want to warranty it.. wouldn't recommend for off-road use, cosmetic only...
@CEPHALEXIN323
@CEPHALEXIN323 10 жыл бұрын
Price for this are kinda expensive. I'm thinking of going for the Rockbloks flaps instead they are half price cheaper
@dragonsQB4
@dragonsQB4 7 жыл бұрын
You forgot to mention the U-clip on the back bracket, also good luck to anyone trying to instal the rear flaps with the tires left on #impossible I needed to use a wrench to twist the screws in instead of using a screwdriver.
@azfazer
@azfazer 7 жыл бұрын
www.amazon.com/gp/product/B000XYOUS6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
@Rainoke
@Rainoke Жыл бұрын
Forgot the clips on the rear.
@isaigarcia394
@isaigarcia394 8 жыл бұрын
what rims are those?
@coolcris4311
@coolcris4311 7 жыл бұрын
The flutes in the instrumental are tripping me out
@coolcris4311
@coolcris4311 7 жыл бұрын
I can’t concentrate
@thinkforyourself6953
@thinkforyourself6953 3 жыл бұрын
You Rock ! Great instructional video..
@PlainBanana
@PlainBanana 9 жыл бұрын
You forgot to put the u nut for the rear flap.
@Just_A_Base_Model
@Just_A_Base_Model 6 жыл бұрын
Funny how he says to give them a call but when you do all you get is a voice recording saying that they only take emails.
@meneshreddyofficial
@meneshreddyofficial 6 жыл бұрын
Video helped a lot in the installation thank you
@mikejacobson8090
@mikejacobson8090 7 жыл бұрын
Song name?
@paulocarrillojr1136
@paulocarrillojr1136 5 жыл бұрын
Can this fit a 2019 wrx
@SubiSpeed
@SubiSpeed 5 жыл бұрын
yes
@Shawn12832
@Shawn12832 5 жыл бұрын
The brackets don’t fit the back for the 2019 wrx
@bignoe1453
@bignoe1453 5 жыл бұрын
shawn mulhall yeah they do I put mine on my 2019 lost some clips for the front so I can’t rock my front mud flaps only the back
@Siege614
@Siege614 10 жыл бұрын
Hey SubiSpeed love the videos! I have got to say your camera work and informative speech is very professional! I have a question though what are your rim dimensions? i heard you say the fronts were 18x9.5 with 265's but what are the offsets? and are you using the same for all 4 corners? did you have any rubbing issues on the suspension? or would you have if you didn't go to aftermarket coilovers? Did you roll the fenders? Thanks in advance keep these videos coming, after i get back from being overseas i'm looking to get a 2015 sti and "try" to do most the work myself.
@SubiSpeed
@SubiSpeed 10 жыл бұрын
Thank you for the kind words! Appreciate you taking the time to watch. 18x9.5+38 on all four corners. We are on coilovers with -2.5* camber. Fenders are untouched. www.subispeed.com/2015-subaru-wrx/wheels-and-accessories/wheels/enkei-nt03-m-silver-18x9-5-38-set-of-4-2015-wrx-sti-4320.html#.U71E__ldV8E You can follow our build thread on NASIOC for more information. forums.nasioc.com/forums/showthread.php?t=2627328
@Siege614
@Siege614 10 жыл бұрын
Hey your welcome :) I have another question. When i get an STI i am getting coilovers but i want some that arent too rough. Right now i live in japan and have a drift spec 180sx and.... i hate it lol i dont get to the track often and it beats the hell out of me on the daily. would you recommend those hks or would they be too much? i basically want more agility without sacrificing comfort. i know that this concept is going in 2 different directions at the same time but you guys seem to know quite a lot about what you do.
@SubiSpeed
@SubiSpeed 10 жыл бұрын
KW v3 will suit your needs. The HKS are good as a daily driver and are fairly comfortable, but the KW will out perform at the track and still be just as comfy.
@Siege614
@Siege614 10 жыл бұрын
Thanks! keep these videos coming! i need more ideas haha, what are your guys thoughts on the tomei single side exhaust? I love it but what are the pros and cons?
@SubiSpeed
@SubiSpeed 10 жыл бұрын
Chris Weg Pro: It's a light weight exhaust and 3". :) Con: Doesn't make you breakfast. :(
@djrichsaracino2554
@djrichsaracino2554 9 жыл бұрын
Just got the rock blox yesterday have yet to install them but the quality is spot on, way to much for the rally armor and I'm not into the shine look, just my option, the rock blox are to me made of a excellent material and you have 2 options short or reg, short being 1.5 shorter and thats what I went with, for 90$ to the door can't beat the price and hey you get a pack of smarties with them lol, I know I'm gonna be a happy driver. Again just my 02. Cheers.
@benmiller8111
@benmiller8111 9 жыл бұрын
be careful with rock blocks especially when backing up. the material may seem to be better because it is thicker/ stiffer (that's what she said) but that also means that they are less forgiving.
@BeamsAE86
@BeamsAE86 10 жыл бұрын
What is that amazing song being played in the background. Great vid!
@richfortin
@richfortin 10 жыл бұрын
love the videos
@berengerchristy6256
@berengerchristy6256 8 жыл бұрын
I fucking hate c-clips. They never go back in, and if they do, they're so loose they just fall right back out
@juancarlosbonilla9633
@juancarlosbonilla9633 7 жыл бұрын
Nice car!!!👍👍
@user-gc6os1yt7x
@user-gc6os1yt7x 2 жыл бұрын
I love how I need spend $200 on a pair of mud flaps that are in no way a ‘Easy’ install.
@sulfuricanaljuice3994
@sulfuricanaljuice3994 Жыл бұрын
Took me 45 min and im kinda retarded, left the wheels on too
@Rotor115
@Rotor115 2 жыл бұрын
Thx
@AMGTOUGEX
@AMGTOUGEX 4 жыл бұрын
30 minute install my ass! 🤣🤣😅😅😅👍👍👍
@rogerpotempo
@rogerpotempo 8 жыл бұрын
you forgot to install the rear clips
@akhosha2
@akhosha2 10 жыл бұрын
You guys gotta bump up your f stops. Too blurry. Love the vids though 😀
@Snipurss
@Snipurss 2 жыл бұрын
I must be an idiot because the instructions barely helped and I couldn't get the stupid plastic clips off without breaking them
@deltafan909
@deltafan909 10 жыл бұрын
Looks sick!
@nickcritelli2133
@nickcritelli2133 9 жыл бұрын
The hardware that comes with these are trash! The "s" clips don't fucking clip on worth shit! The backs go on easy I can't get the fronts on. Any tips?
@Mustang427R
@Mustang427R 7 жыл бұрын
Couldn't have spent a little extra time finding "Black" hardware??? Looks a little to ghetto IMO for something over $80....
@j.s.3414
@j.s.3414 6 жыл бұрын
Steven Lazarus get a sharpie....
@TheZaoNY
@TheZaoNY 8 жыл бұрын
This fit Impreza 2016 ? Look the same.. 😂
@boomerd513
@boomerd513 6 жыл бұрын
Delete this video or just edit it in but....Didn’t say a word about the clip for the back bracket at all. Had to pop that damn c clip off to put it in. Kind of a big part to leave out lol. Anyone that reads this, just read the directions or find another video tutorial.
@Sms68
@Sms68 9 жыл бұрын
U guys have to make White ones when I take My White BRZ to Shows.... Let's get a move on it Brother !!!!!!
@SubiSpeed
@SubiSpeed 9 жыл бұрын
Silk Boxing They're in the works ;)
@christopherbassit2757
@christopherbassit2757 Жыл бұрын
$300 for gr corolla like wtf man
@DevinWasTakenWasTaken
@DevinWasTakenWasTaken 9 жыл бұрын
These mounting clips are the worst thing that has ever happened
@petergood5294
@petergood5294 3 жыл бұрын
Damn Kevin used to be fat jk love yalls product just got mine today for my 2020 wrx
@aaronr9551
@aaronr9551 4 жыл бұрын
How would I put these on when I have the subaru rear spats? Im worried the screws from the spats wont let me get the bracket it in the back.
@okapdokap
@okapdokap 3 жыл бұрын
Can any1 help me pls… i cant pop off the front clips from the car…any tips?
@zerothehero2494
@zerothehero2494 3 жыл бұрын
Anyone have a solution to installing these but with the oem lip kit, rear spats are giving issues
Subaru WRX STI - Rally Armor Mud Flap Installation
8:08
Engineering Explained
Рет қаралды 201 М.
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
How to install a third brake light - Two Minute Tuesday
5:43
SubiSpeed
Рет қаралды 245 М.
How To: Mach V Cobb Accessport Vent Mount 2008-2014 WRX/STI
10:08
DiRT Rally 2.0 Replay Desafio Diário (Special Events)
3:31
Best of Rally 2024 *Crash, Sideways & Big Action*
19:40
Mad4Tar Motorsport Videos
Рет қаралды 11 М.
The Truth About 4 Cylinder Turbo Engines In Pick Up Trucks
21:06
Jason Samko
Рет қаралды 19 М.
Cobb Accessport Install/Review - 2015 Subaru WRX
11:09
SubiSpeed
Рет қаралды 329 М.
Australia: we thought we had seen it all
30:44
Nick and Mathilde | Next Meridian Expedition
Рет қаралды 28 М.
SubiSpeed - 2015 WRX & STI Whiteline Sway Bar Install DIY
13:31
SubiSpeed
Рет қаралды 124 М.
The BEST Subaru Coilovers
9:48
FOF Racing
Рет қаралды 3 М.