Sumsour (Atten Clone) 8586 Solder and Rework Station

www.pcbway.com/ Get 5 boards in about a week for $22!
Shopping link: www.google.com...
*************************************************************************
Please help support this channel at NO COST TO YOU. If you shop on *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: cle.clinic/2Td...
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
--------------------------------------------------------------------------------------------------------------------
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Please check out www.patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
---------------------------------------------------------------------------------------------------------------------
Donation:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
DMM: Owon B33+ - amzn.to/3qQgH20
Power Supply: Matrix 3206 - amzn.to/37C0fL9
Portable O'scope: YEAPOOK ADS1013D - amzn.to/2ZG4G3x
Bench O'Scope:Hantek DSO2D15
- amzn.to/3ir307N
Soldering Station - KSGER T12 - amzn.to/2NuNdby
Multimeter leads: Probemaster - amzn.to/2ZJ0BLK

[@666blank0]

I've been repairing phones for a living for around 6 months now, I got a station similar (if not the same with another color scheme), and it has done a lot of work, even with days going for 6 hours straight turned on. Not a single problem, not once, besides a tip that needed replacement (also, I never used the tips that came with it, I got some aftermarket for it). Great for beginners and for working on it. I reolaced it now with an iron and a hot air gun separated, I will keep it as a backup. Recommended!

[@bblod4896]

Rewet the SMD with leaded solder before using hot air to remove. Also add flux when removing components

[@bblod4896]

From now on: All equipment from China should come with a subscription to Duolingo so one can learn how to read the instructions 🤣😂 That is a very nice gift from Uncle Rob, you did good Paul. ☮

[@Johadart]

Awesome Early Present Paul, you won’t know yourself when you get use to it , great work keep it up mate🤙🏼🇦🇺 Oh and a hello to uncle Rob 🤙🏼🇦🇺

[@robertwebb5586]

Hello Joe, nice seeing you here again.

[@Johadart]

@@robertwebb5586 I’m never too far away from Paul’s videos lol , hope your doing well mate, oh p.s your flux rocks 🤙🏼🇦🇺

[@gedebuxstouchscreen3973]

This solder blower auto off and on..Position the blower lever up and it will turn off automatically, if the lever is down it will turn on

[@_DanielPrieto]

I just bought the same model. When I place the hot air gun on the base, it doesn't go to sleep. Sometimes it goes to sleep and starts randomly. I don't know, I'll go back to the store tomorrow. Your's seems to be worse, because it did not woke up when you picked the soldering gun

[@zhenreview]

I have that same problem, seller said the fan will working even though you put into the sleep cuz the fan trying to cool down that thing😅

[@davidward9935]

Paul, Does anyone make an affordable system similar to the old Pace systems any longer? I am looking for a reliable all-in-one temperature controlled iron, hot air tool and desoldering pump system.

[@johnnyjesus8131]

A maquina ainda esta funcionando perfeitamente ate hoje ??

[@singlesteve2011]

nice gift I wish I had one

[@gabrielcorrales8878]

What do you think about those 900m tips? My potentiometer controlled iron came with a pack of those but I am not able to tin them. Solder just won't stick even when using your cleaning technique (although it helps a little). When I got it I was a beginner and I didn't know I had to be careful with oxidation and it is probably already oxidized to no help so I've been searching for good quality tips but everything I find are no branded chinese packs. I'm about to buy a soldering station but I don't know if I should get one with those tips.

[@williamwong5627]

I prefer the old model that uses a transformer. Switching power supply is crappy.

[@uhmgawa1435]

So the question is what is powering the iron heater? This style of hot air wand is mains powered, controlled by the visible opto/diac/triac combo. However the iron heater is 24V and the usual iron/copper mains frequency transformer isn't present to furnish 24VAC. The small switcher ferrite transformer looks like it is good for about 10W or so and is probably just a flyback design powering the control circuitry. The fear is they are chopping mains cycles through the iron triac such that the iron element consumes its rated 50~70W. That'd be rather unorthodox as those replaceable iron units aren't designed with the expectation they have a path to the AC mains. But I suppose this is just another "death by chinese design" proposition.

[@robertwebb5586]

There he goes .....

[@alipediasolutions7334]

So you used for a few mnths ,does it working fine now ??

[@vk5fe943]

Would love to know if the soldering iron tip is properly connected to ground.

[@djpaesgana]

the iron takea a lot of time to heat wtf

[@thepubliceye]

Are you Dewclaw

[@CTCTraining1]

Thx for an interesting look inside - so would it be right to say the triac-driver chip plus the heat sunk transistor (presumably a triac) adjacent are bringing the voltage down to 30ish volts at 25amps to then be partly cleaned-up by that daughter board with the transformer and larger caps to run the display? Might be interesting to scope those databus pins you spotted on the main board. 😀👍

[@YugoAmaryl]

Did you now how i can calibrate?

[@mp1454]

🙏🏻💯❤️🌟👍🏻👍🏻👍🏻👍🏻

[@AliHussein-bb3ie]

You deserve this gift