Sumsung 4E error, front load washing machine. Solved!!

Bad manufacturing practices from Samsung? water level pressure sensor hose got a hole worn into it from Samsung not securing the hose properly.

[@gregoryhinkle6352]

I too had the exact same problem...you also saved me a bunch of money, time and energy trying to figure this out. Thank you SO very much for posting this...

[@alexanderyagnow6223]

Spot on! Who knew a pinhole could cause so much cussin’?! You, my man, are my hero. The 1/8” barbed hose extension is genius too, I was going to buy a new hose. Thank you!

[@vincegeiser3932]

Thank you for putting out this video to help others fix there machine. It was very helpful and saved me a repair bill.

[@leonardbarnes6582]

You are absolutely correct there’s a pinholes in the vacuum hole! Thank you.

[@leonardbarnes6582]

Vacuum hose

[@catfisher420]

Glad I could help.

[@mistielewis249]

Thank you so much. This saved me money in a new washer. My husband had already told me to throw it out.

[@user-lh9ck8ok4p]

Thank you i see your video after i changed the water pump and the problem still exists ❤

[@guocongbin3834]

I had the exact same problem. Your video saved my day. Thanks very much.

[@josemendez-eo8xq]

Thanks so much for posting this it saved lots of money to all of us THANK YOU!!!!

[@joseadrianmascorroaguirre1387]

It's like you're reading my mind and my washes mind... The wear and tear was in the exact same place. Thank y7.

[@marcossandoval-em8xu]

Thank you for your help. I did it on mine and it work good God bless you

[@mmaziarz456]

Thanks for the tip - fixed!!!!

[@ScrapyCoco2012]

Lifesaver, I didn’t even know to look for this

[@zerrzerros3722]

This helps me a lot man!!! Thank you may god bless you!!! 😊😊

[@jdraga1263]

If hose does not fix repalce the blue sensor it is attached too. Also can be the tempature sensor located in rear of machine under access panel by main board.

[@davidwright7516]

I had the exact same problem. Watched your video and machine works perfectly again. Thank you

[@catfisher420]

You're welcome. Glad I could help.

[@user-ne4zk8ws2o]

thank you Bro!~ you save me a washing machine.

[@andresvargas8965]

Brother thank you for this video saved me from buying a washing machine hahaha blessings.... 🙏

[@catfisher420]

Glad I could help.

[@guocongbin3834]

Samsung should recall. This obviously is a design problem

[@tylerfetterman6675]

Thanks dude. Mine did the same thing.

[@marcosalinas468]

Thank you for your help

[@MultiLisa10]

Crap my dryer sits on top of this machine gonna have no choice but to call my 82 year old landlord and he always tries to fix everything himself

[@jayswedman6794]

Exact problem, I bought a new sensor, did not fix. Hose was rubbed!

[@catfisher420]

Glad I could help!

[@ComplexSavage]

The 4e code only goes into effect when it’s on Quick Wash. will that fix that also?

[@catfisher420]

It might. would be a good idea just to check the condition of the hose. You only need to remove two srews to remove the top of the washer.

[@michelleortiz928]

Hi, you said you put in a fitting, could you explain more?

[@catfisher420]

a 1/8 barbed hose extension like this. www.amazon.com/Quickun-Plastic-Fitting-Splicer-Adapter/dp/B08L5DTRCK/ref=asc_df_B08L5DTRCK/?tag=hyprod-20&linkCode=df0&hvadid=475873702955&hvpos=&hvnetw=g&hvrand=9614370958713070989&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9024569&hvtargid=pla-1187762195029&th=1

[@amylevitt1833]

Is it really only 1/8? I ordered and it looked so small. Just want to confirm! Thanks!

[@guocongbin3834]

@@amylevitt1833 Yeah, 1/8 is smaller. I had to use some tapes to make it bigger.