SUN2000L-(2KTL-5KTL)-Installing the Smart Power Sensor(DTSU666-H)

SUN2000L-(2KTL-5KTL) Residential Solar Inverter Installation--Installing the Smart Power Sensor(DTSU666-H)

[@geliosystemsukraine2737]

Hi, Fusion Solar. The video shows the connection of the smart power meter to the inverter. Where can I find setup instructions in the Fusion Solar program for limit generation to level load (zero power)?

[@منير.عيسى]

I suffer a lot from the fuel prices in feeding the combined electricity during the day. Can I operate by myself without the need for a stream of generators that run on diesel fuel?

[@SoLuna137]

the ac power cable is not always that small and simple. It is mostly large size wires and multi-sets, what other CT compatible with DTSU power sensors?

[@MaharAli]

DTSU666H comes with two types of CT's, 100A and 250A. Which means 2nd type of CTs can be connected with 210mm cable easily.

[@SoLuna137]

DTSU666-H doesnt let you clip into a 2 sets of 250mm² Thankfully there is DTSU666-HW where you can use 3rd party power sensor that can accommodate even 800A power lines​@@MaharAli

[@القناعةغايتي]

Is it possible to put a 125 kVA Huawei inverter into the network and add an inverter from another company with 60 kW? There is no problem with that.

[@JM-ip4yr]

¿Se puede usar el inversor monofásico con el medidor trifasico? El servicio huawei en España no lo tiene muy claro.

[@claudiof.barbano5530]

is it possible to get DTSU666 data into Home Assistant somnehow?

[@drazendjud]

I see in this video it is used one phase inverter, can I use on Smart Power meter and Three phase solar inverter SUN2000-5KTL-M1 ?

[@waqashouse5594]

i have connected with the same wiring but my power meter is still offline what can be the reason ???

[@petrusneacsu9858]

Is the inverter connected to only one phase? I understand that power is measured on all phases but it delivers energy only on one phase? I mean the AC output of the inverter which is connected only on the yellow phase.

[@bugracangulmez]

İnverter is working with 1 phase and 1 neutral. However, 3 phases come from the power sources, thats why there is 3 limiter. Its called 3 phase on grid inverter.

[@robertomuhammad35]

Should i buy and install this sensor with SUN2000L-5KTL ? For what its necessary Can i use inverter SUN2000L-5KTL without sensors

[@au91759]

You can use the inverter without this meter. It's only needed if you want to control your power consumption or if want to have a Huawei battery system

[@pavlo_dubovyk]

Is it possible using one battery grid for 2-3 HUAWEI SUN2000L-5KTL?

[@HuaweiFusionSolar]

Hi Pavel, do you mean to connect 2-3 pieces of Huawei SUN2000L inverter to just one battery module?

[@pavlo_dubovyk]

Huawei FusionSolar yes, exactly. Also, parallel connection interested too. I mean 2-3 devices with parallel connection to distribute load with one battery.

[@pavlo_dubovyk]

Huawei FusionSolar also I will be very grateful for manual where described battery installation, requirements and other relevant to sun2000l device as I have not found this manual yet

[@santoconoegidio]

POSSO COLLEGARE IL SERIALE A 90 MT ?

[@DONDUONGSOLAR]

Hi, i’m from vietnam, where to buy it, please give me link buy DTSU666-H 250A, thanks you!

[@HuaweiFusionSolar]

Thanks for contecting, here's our Vietnamese website: solar.huawei.com/vn/HowToBuy

[@aventurasdemishijos63]

Hello! Where to buy in Spain? DTSU666-H

[@pwrt_valencia]

Hola Alejandro, compras de Solar Massel en Pedreguer 😊

[@HuaweiFusionSolar]

Thanks for asking, here you go~ solar.huawei.com/es/HowToBuy

[@dekhzarahatk]

@@HuaweiFusionSolar Why do we need DTSU666-H for zero export? When SUN2000-5-20KTL-M0 inverter already has zero export option? Please Guide.