Home Solar System Installation: DIY Solar, Where To Start.

Рет қаралды 2,927

This Is How I Did It - Solar and Hydro Power

Ай бұрын

We installed a large home solar system with no prior solar experence. With a little research and help this was easy.
In the video we show you a Sungold hybrid 18kw home solar system with battery backup.
We start out showing you the solar panel array then we go inside the control room and take a tour of the solar power equipment.
Welcome to our comprehensive DIY guide on installing your own hybrid solar system! In this video, we’ll take you through each step of the process, ensuring you have all the information you need to successfully set up a solar power system that can provide reliable, sustainable energy for your home. We'll cover everything from solar panel arrays to the intricacies of wiring, and the crucial components that make your solar system safe and efficient. Let's get started!
Solar Panel Arrays
We begin with selecting and installing your solar panels. Solar panels convert sunlight into electricity, and for our system, we will be using high-efficiency monocrystalline panels. Learn how to determine the optimal placement on your roof or ground mount to maximize sunlight exposure, taking into account factors like angle and orientation.
Combiner Boxes
Combiner boxes are essential for organizing the wiring of your solar panels. They combine the output of multiple solar strings into a single bus. We’ll show you how to install and wire a combiner box, ensuring your setup is tidy and manageable.
Wiring in Series and Parallel
Proper wiring is critical for both safety and efficiency. Wiring panels in series increases the voltage, while wiring in parallel increases the current. This segment will explain the differences and benefits of each method, helping you decide the best configuration for your system. We will also cover how to correctly size the wires to handle the expected current and voltage, avoiding potential hazards.
Charge Controller
The charge controller regulates the voltage and current coming from the solar panels to the battery bank, preventing overcharging and ensuring the longevity of your batteries. We’ll walk you through the installation and configuration of a Maximum Power Point Tracking (MPPT) charge controller, which optimizes the power output from your panels.
Battery Storage and Rack Mount
In this system, we use five 100Ah batteries to store energy for use when the sun isn’t shining. We’ll show you how to connect these batteries in parallel to create a reliable and expandable storage solution. Additionally, we’ll cover the assembly of a rack mount system to keep your batteries organized and accessible, ensuring proper ventilation and safety.
Fused Breakers and Rapid Shutoff Switches
Safety is paramount in any electrical installation. Fused breakers protect your system from overcurrent situations, while rapid shutoff switches are crucial for emergency situations, allowing you to quickly disconnect power. This section covers the importance of these components and demonstrates their installation and integration into your system.
Hybrid 18kW Inverter
At the heart of our system is the hybrid 18kW inverter. This powerful unit converts DC power from your batteries into AC power for your home and can also switch seamlessly between grid power and solar power. We’ll provide detailed instructions on how to connect your inverter to the rest of your system, configure it for optimal performance, and troubleshoot common issues.
By the end of this video, you’ll have a thorough understanding of each component in your hybrid solar system and the confidence to tackle the installation yourself. Whether you’re looking to reduce your energy bills or move towards a more sustainable lifestyle, this guide will help you achieve your goals.
Don't forget to like, subscribe, and hit the notification bell for more DIY solar projects and renewable energy.
Thank you for watching, and let’s harness the power of the sun together!
Our Equipment List:
We have 32 - Sungold 550 watt solar panels that are on the roof of our the combinner boxes to make them parrell.
4 Sungold charge controllers (100 amp charging, 5200 watts pv input)
5 Sungold 100ah battery array.
1 Sungold Hybrid 18kw Inverter to power the solar system sub panel.
4 combinner boxes.
You can find all the Sungold Equipment here.
sungoldpower.com/?sscid=31k8_...