SUPER SIMPLE 5.8GHz RSSI ANTENNA TRACKER

This antenna tracker is based on 5.8GHz RC540R diversity video receiver. There are other RSSI trackers, but this one is really simple and cheap.
Main parts:
RC540R diversity video receiver or FR632
2 x directional antennas, helical or patch
Arduino Pro Micro ATmega32U4
9g servo
5V voltage regulator
Arduino Source code, STL files, photos
github.com/and...
RC540R video receiver
www.hobbyking....
• Quanum 5.8GHz FPV dive...
• Tweaking the Quanum 5....
Arduino (Leonardo)
www.ebay.com/it...
Servo
www.hobbyking....
5V (adjustable) voltage regulator
www.ebay.com/it...

[@VodooFeed]

Hi Antti, this is a brilliant design. I got inspired by your video some years ago and built a similar setup using 2 diversity receivers. The Quanum RC 540R does the guidance job with two 16-turn helical antennas. I added a small SD-card reader/writer for data logging and could fit it into the Quanum as well. The 2nd receiver, placed about 10 inches besides the Quanum, is an FR632 with one identical 16-turn antenna, pointing exactly in between the two guidance antennas, and a 4-leaf antenna for close range reception. I didn't care for vertical guidance. My construction is quite heavy and therefore using a big servo. Both diversity receivers feed their best signal into an Eagle Eyes FPV Station by Eagle Tree and the station outputs the better image of the two receivers for viewing/recording. Obviously, this is for long range operations. Your software was of great help and a good starting point. I adapted and expanded it a lot, up to the memory limits of the arduino. This works like a charm. Good image on 5.8 GHz up to a distance of 15.1 km (9.4 miles). This was the battery range limit of my small styrofoam model aircraft. Using a running average for the RSSI signals gave me very precise antenna guidance even at very low signal strengths.

[@AnttiVainik]

Wow sounds pretty serious and awesome :D Do you have videos of your setup? Also it would be interesting to check what you have done in the code, have you published it somewhere?

[@VodooFeed]

@@AnttiVainik I had a big thread about the project on a German speaking forum, which unfortunately was closed down, loosing all contents. But you can find an image of the tracker and my version of your Arduino software by going to the 'euroconnection' URL with the TLD (Top level domain) for Switzerland.

[@hassanhamdyseddik9446]

i need to see your work thats good

[@Brazonthefly]

Thanks for putting this YT video together, I have built one and it works pretty good

[@johanmeijer85]

Wow, awesome and cheap solution for an antenna tracker. I was looking for a good diversity receiver, when I stumbled upon your video. It made the decision much easier! Bought this receiver and built the antenna tracker with the components you mentioned. Works like a charm! Changed the code a bit to my likings, but it's basically your idea. Thanks man!

[@bondebos3478]

Johan Meijer What did you change? And could i use those codes?? Thanks!

[@captainKts]

I'm gonna need that code cowboy

[@johanmeijer85]

Sorry for the late reply, but here it is: www.dropbox.com/s/l0u19iy3yhyqd2k/AntennaTracker.ino?dl=0

[@johanmeijer85]

@@captainKts photos.app.goo.gl/fZ4noDLT8fdmpufT9

[@tekkeysodan]

@@johanmeijer85 hi bro, can u help me edit this code to using the 360 degree servo, thanks. plz

[@seanbittner7136]

Oh great, just what I need, another project to fuel my antisocial tendencies as of late. Good job guys!

[@ailehorten]

Super Tracker !! I use it with one FR632 Diversity receiver. I have found MAX_RSSI=240 and MIN_RSSI=120 okay for FR632. I have also modified the SERVO_DIRECTION= -1 for my servo (an old HITEC HS-300). The servo is mounted verticaly and above, a plate with onboard the FR632 and the box containing the Arduino Leonardo and the step down converter (12V to 5V). Thank you very much for the arduino code.

[@emmanuelgoncalves8332]

ailehorten how did you measured the max and min rssi for your rx?

[@hassanhamdyseddik9446]

@@emmanuelgoncalves8332 do you know now?

[@billybones1308]

Hello Antti I built your antenna tracker and it is fantastic. I will be adding a second Rx. and a third antenna in the center. If I adjust the outside antenna the one in the middle will be on the aircraft all the time. It is absolutely amazing and so simple to build with all of your instructions and even included the sketch code. I modified the code slightly to suit my needs. Billy Bones

[@AnttiVainik]

Well done mate! I'm very happy to hear of your success. OpenSource rules! If you ever record a video, please share the link, so I can put it in the description.

[@billybones1308]

I will make a video when I add the third antenna. Will let you know when I do. Billy Bones

[@drifter1949]

Hi Antti, I made two of them, one for the Quanum540 which worked first go and one for the FR632 which needed calibrating and is now working. Thanks for your work. Robert

[@AnttiVainik]

Cool! And good work! If you ever film them in action, It would be interesting to see it.

[@yusufusayd3151]

Hey Robert, greetings...if i can trouble you can you help me with doing this with the FR632 reciever please. What kind of tuning did you have to do?

[@Pretparry]

I have built this tracker and it works very well. Thank you so much for this!!!!

[@AnttiVainik]

I'm very glad to hear. It would be interesting to see a video or a photo of your version, please share if you take any.

[@solmag8076]

Hi, do you still fly with this? Have you encountered any problem so far? I want to build one for my long range setup and I want to know if it's reliable. Thanks

[@anjolasboy]

Works amazing.. Now waiting for the tilt :P

[@n8zfpv]

I'm new to fpv. Wow. Nice. I was also thinking about making a diverity 5 helix antenna . This can be my backup :) Great work.

[@changeagent228]

If we could increase the servo speed then you could use 15 turn helical antenna to track precisely with really narrow sensitivity.

[@tothehilt]

Thanks for this vid, very helpful on the build layout. If you had completed this how to with a piece on the Arduino setup it would have been perfect. Many people are left with questions if they are new to Arduino. Setting rssi min/max for example, serial monitor shows servo output, not rssi, so i've hit a wall with that.

[@johnlannigan9831]

I have been looking at this idea very closely and its very good. Do you have a schematic that shows the analogue circuitry for the RSSI? It appears as if the RC540r uses a receiver very similar to the common RX5808 found in a lot of FPV receivers but the one in the RC540r is slightly different, maybe a custom module? I would like to see the circuit and see if it can be used with the RX5808 receiver module. Can you help?

[@jackd6134]

Antti. How would you update this tracker in 2019?

[@TheZolon]

Or 2020 now as I can't find that receiver.

[@markwood9751]

@@TheZolon Given the Git hasn't been touched in 4 years, i'd say there are no planned updates either XD

[@nilsantropow6306]

@@TheZolon using for example the realacc rx5808 you can easily find the rssi pin.

[@chemistt]

@@TheZolon you can recreate this by getting just plain receivers....power them...and set your quad copter VTX to those RX default channel...if you want to spend more time on this then you need secondary Arduino which will search for signal using RSSi....its not hard...just time consuming

[@ferp009]

Very nice!!congratulation!! Its possible to put the receiver in a vertical position and the antennas with different tilt angle? I think you will have a better result if not have tilt movement. Its correct? Thanks and sorry for my bad English

[@BadWallaby]

AWESOME!! Will it go 360 degrees? If you fly behind it will it turn all the way around? or because the servo will only go left and right limited distances?

[@AnttiVainik]

This one uses regular 180 degree servo, so it won't go around.

[@TheTorgehal]

Terve, Antti! Great solution 👍Thanks for sharing it with us. I hope you get to develop it further with tilt function as well (in between your new parenting "hobby" tasks ☺). In my FPV plane I have two VTX transmitters. One with LHCP and the other with RHCP antennas at opposite 45" angle. Giving a better omnidirectional TX coverage. VTX frequencies are individual/different. The Quanum diversity RX supports individual frequencies. I intend to use two of the Quanum Diversity reciever for my ground station. Do you have a suggestion on how to potentially modify your solution to track dual VTX in the plane. Including tilt of antenna tracker. I think such a solution (dual VTX) will have a significant boost to video quality and stability. Especially when low TX power (25mW). I hope you will find some time for the RC and FPV hobby again, but good luck with the parental role ☺ Kind regards, Torgeir

[@AnttiVainik]

Hi Torgeir, and thanks Which Quanum diversity RX do you mean, the RC540? About tracking dual frequencies, I think current code might work unmodified. A potential problem might be having 2 different nullpoints (and in general 2 different of everything, vtx antenna etc). Imagine this situation, you are in a turn and one antenna reaches nullpoint -> rssi drops, the other antenna is at 90° and has perfect allignment -> very good rssi. Now tracker thinks the plane is moving left/right and starts wondering off. This situation is kind of comparable to multipathing, but in this case, one of the channels could "stay down" for a long time, which gives time for tracker to wonder off. Multipathing interference is much faster, and can be dealt with filtering. Anyways I'm just guessing here. This should be tested in practice.

[@AnttiVainik]

How to deal with all those problems? One way is to use 2 or 3 rx for aiming and one just for reception. But now you end up with 5 video receivers + antennas and its not so super simple anymore :/

[@TheTorgehal]

Antti Vainik Hi Antti! Thanks for your reply. Yes, I have the 40ch (32+8) version. I have thought of using one to track the plane as you do (on one frequency) and use the other diversity receiver for video (on two different frequencies). What I then miss is a receiver for omnidirectional antenna when flying near or over the groundstation. I see your point related to potentially issue tracking on two different frequencies with your current setup. Anyhow - I'm curious to test your setup but need to order the components. Looking forward to learn more of your progress with your solutoons. Hope you will get some time for this hobby inbetween parrenting ☺

[@Surferant666]

Good video... Btw Why havent you got another servo for vertical track?

[@happyfox711]

Great little tracker ! That's all you need. Gives the finger to all the expensive "super-trackers", that maybe look better in theory, but doesn't really perform much better in the field. Question? I see a lot of commenters suggest to expand(doesn't get/want simple) on this and make it tilt and add a close range(!) antennas etc. - am I right your two antennas will get a strong signal from any direction at close range ? and therefore also performs well without tilt ?

[@AnttiVainik]

Hi. There is no simple answer, but you are right. In the video I'm using 3-turn helicals, which have about 75 degree wide beam angle. Imagine antennas pointing 45 degrees up, now you are covering "almost" whole vertical axis. Of course in practice its not going to work like that, with tracker or without. You will always get bad signal near the ground and directly above your head.

[@happyfox711]

I see. If you present the video/send them a prototype, hobbyking or some RC manufacturer will surely produce this one. Once (before they were all over the place) I said to a cctv factory in Chenzen - just chatting through Alibaba - that I needed a particular PTZ cam with 3G module. One week later they had made it for me, and kept selling this dome camera with a telephone module inside until those things started to show up in better intergrated designs.

[@AnttiVainik]

Exactly. RC540R runs on ARM processor, so it could do tracking by itself, without Arduino hacks. And if Quanum had made it firmware upgradable with usb port, it would have been the most popular and hackable receiver on the market.

[@happyfox711]

You really should try to make them do that. It's all about talking to the right person. If you don't make money - patenting is not really big in China as you know - at least you'd do something good for the other FVP guys out here(that don't know programming/tinkering). How does it work with 4-5 turns, or other more Dbi directional antennas ?

[@andreasvieweg9610]

great and good working! I also made one with your code and two helical antennas. it works quite well. only problem I have is tracking close to the receiver. it starts moving away from the drone. Do you have an idea what to do?

[@yang.6428]

Very cool and look forward to a more perfect design.

[@TheodorosBako]

Great Work!! Trying to build one myself. Thank you

[@rrenegadoo]

excellent video thank you....I know you are busy, but I hope you post a new video with the Tilt function... Good work .... keep it up.

[@philaell]

I want to use this with 2 1.3ghz rx. There shouldn't be an issue as long as I can wire the Rssi to the arduino correct. Also would I be able to use a brushed/brushless motor instead of a servo? Thanks again for posting this.

[@Ruben-fk7zz]

Have you thought about using the half overlord for a pan and tilt system? If the rssi and antenna setup would overlap enough it could probably maintain a strong signal without breakups and stay close to the mainlope even while crossing the station. I would like to build a similar systems like yours in the future with the half-ol, am just not solid yet in programming... Thanks for your design!

[@dragon121978]

Awesome mate just in the process of building one so you have to same antennas on both receivers or could you have a helical and a clover leaf or say a 3 turn helical and a 5 turn one

[@AnttiVainik]

You must have two directional antennas. Cloverleaf is omnidirectional, it has same amplification in every direction, with clover the tracker wont be able to tell which direction your vtx is.

[@philaell]

Could you use any diversity reciever for this or does it have to be this one specifically? great job by the way.

[@AnttiVainik]

Basically any receiver will do. All you need is 2 measurable RSSI outputs. The voltage range might be different than of RC540R, but that is easily compensated in code. I heard someone is using FR632 and Yang (in comments below) is using D58-2 receiver.

[@captainKts]

@@AnttiVainik how do you know what pin is rssi output on the RX?

[@flighttherapybullisticfpv133]

I LOVE this idea man thank you so much! I was wondering if one could use a small stepper instead of a servo to get better longevity and full 360 degree coverage by the antenna?

[@hassanhamdyseddik9446]

Have you done anything about this matter?

[@jameswebb8162]

Killer video! Taking notes, thxs!!

[@Ammothief41]

Awesome! I know a little arduino. Gives many ideas on using a 2nd receiver to triangulate position. Thanks!

[@shaunvisser8155]

Yes, it will, but you'll need 2 receivers on the servo. I'll be building one in the next few months, and try to get a 3rd receiver to put a third antenna above them, which could be used to tilt up. I'll need stronger servos as there will be quite a bit of weight on them. Seems like an interesting project, should be fun

[@antoniosilver6224]

I dont understand one detail, the servo that you use rotate only 180º then you dont cover never the 360º. Its right this?

[@Patty-qy8qh]

I am not into antenna trackers, but there is one thing you can do to every servo: open it up and remove the pin, that blocks is from turning 360°/infinite. Same way you can use a servo as a winch on a truck. But I have no idea of this will work with the controller on the tracker.

[@TheGtech83]

Such clean video, wow

[@billybones1308]

Hello Antti your antenna tracker looks fantastic. I will be putting one together. I have the sketch code that you used but need to know which library file that you used for the Arduino. Have you continued with the development by adding pitch yet?

[@AnttiVainik]

I haven't had the time to develop pitch tracking, also partially because tracker works "fine" with horizontal only, unless you fly really really high. If you are referring to Timer.h the download link and installation instruction are mentioned in README.md

[@billybones1308]

Thanks for the quick reply Antti. I have the software ready to program the Arduino. Where did you connect the power lead and ground for the servos? Almost ready to start the build. Thanks Bill

[@AnttiVainik]

Both, servo and arduino are fed from the 5V regulator. I soldered servo +5V and GND to the arduino, which in turn is soldered to the reg.

[@GodsLittlegizmoguy96]

Nice tracker! I am also building a tracker with both right/left and up/down tracking for a senior design project. However, I've been running into some electrical noise issues. I've been reading about 0.4 volts with no signal source. Do you know what your RSSI voltage is when no signal source is present?

[@AnttiVainik]

Actually yes, if you look at my arduino source you'll find RSSI_MAX=400 and RSSI_MIN=120. On a 5V arduino it means (400/1024)*5=1.95V at max rssi and (120/1024)*5V=0.59V at min rssi (plus minus some offset)

[@GodsLittlegizmoguy96]

Ok thanks for the reply! I think I'll probably go with an averaging filter, subtract out biases, and implement a threshold voltage in order to get as clean and accurate a signal as possible.

[@TheJergoswiler]

Wow, well done. I love taht thing you built. Thanks for sharing! I think that tracker would work a lot better with 3 antennas. I'm not sure if the tilt is really needed then... For that you would need 5 antennas.

[@ChristianMixLocutor]

Very good project, but I have a doubt, I can do with 2 rx of video or it has to be the diversity? I understood that the logic would have to be diversity because in it has the signal that says to the board which antenna is stronger, and from what it has given to understand is that it is exactly that signal that informs the board the best atena that you use for tell arduino how the signal is, but I do not understand how he knows which way to go, when you answer here I buy the receiver, because I depend on your answer if I can use 2 simple receivers or it has to be really diversity. Thank you.

[@AnttiVainik]

I just want to clarify one thing. Diversity is a way of choosing better signal and switching it to the (video)output. For RSSI tracking you don't need video diversity, you just need two video receivers with RSSI output (Arduino has nothing to do with video). All Arduino is doing here, is measuring two RSSI voltages from two receivers and turning servo towards better one. That being said, you can take two identical receivers, connect their RSSI pins to Arduino and start tracking. Now you connect the display to one of the receivers, and all you see is video from that receiver, there won't be diversity swithing. Is that a problem? Not necessarily. You have to keep in mind that usually you have one directional antenna and one omnidirectional. When you fly out of directional beam, diversity switches to omnidirectional antenna. But in our case you have two directional antennas which are constantly pointing at the VTX, so video signal is almost equally good (or bad) on both channels, no need to switch around. Of course this is in ideal conditions only. Sorry long explanation, I hope it answers your question.

[@justinbledsoe8252]

I am new to electronics but I assume the 5v regulator connects to the power and ground on the Arduino?

[@sfersystem]

Great sharing !! Must we use two directional antenna or one cloverleaf for fly over and behind is possible ? thank you.

[@AnttiVainik]

You'll need two directional antennas! As the name suggests Omnidirectional antenna can't tell which way stroner signal is. Current setup & firmware are good for flying in "front" of you, not behind or above.

[@sfersystem]

With the second servo for tilt, it will be a real good solution, hope the software become compatible soon. Thanks for the fast reply and this good job.

[@bondebos3478]

Could i use patch antenna’s?

[@SzymekCRX]

wow, this is do simple yet ingenious ;-)

[@wayneiona]

What happens if the signal drops out ,does the tracker go crazy trying to find the signal ? Cheers

[@gonefishingtwo]

Works brilliantly!

[@timothysmith5453]

I'm just in the process of building this and have a comment about uploading the file to the Arduino. For several hours I have been trying to get this working on a Windows 10 PC with no experience of Arduino. So for the uninitiated, after you install the software (It seems Arduino doesn't like the software installed in the default installation path, I ended up only getting it to work when installing it in the root of the hard disk eg c:\arduino) you have to upload the timer library into the libraries folder under that. You also can't have odd characters like - in the folder or name. So in other words, extract the timer-master zip file into a folder named timer under arduino\libraries.

[@villehammar3166]

Nice!!! Really good video quality

[@MrAnatolyvizitiu]

Is vertical axis tracking coming anytime soon? Would be interested in that update.

[@tyeung0571]

Cool project. As configured, how would the tracking behave if you were to fly a complete circle around your antenna?

[@AnttiVainik]

Currently I'm using regular 180 degrees servo, naturally that rules out the other 180 degrees. It's possible to use 360 deg servo, but I was in a hurry and wanted to test current setup asap. Say you're flying clock wise in a circle starting from 12 o'clock. Servo hits its limit at 3 o'clock, you continue to 6 o'clock, 9 o'clock now tracker could swing 180 degrees, but it really doesn't know where the target is. I would imagine it would pick up direction again when your quad is closing 12 o'clock. Google for "helical antenna radiation pattern" you will see that helical antenna has quite erratic pattern towards back and sides, so I really don't know how it's going to behave. I'll try that the next time I go flying.

[@RubinGrolsch]

Antti Vainik you could also use a stepper motor. They are just as easy to program using an arduino

[@AnttiVainik]

True. Also tracking with steppers would be very precise. Servos are easier, everybody has them and everybody knows how they work. Just wanted to keep it simple.

[@huyle-86]

Nice project! Today I will do as your explained above. Hope it will be success! :)

[@AnttiVainik]

Glad to hear! Link us a video when you get it working.

[@isaacg.7288]

So cool. Thank you for sharing

[@dragon121978]

Hi well done awesome project, have you made any updates to the Arduino code or is their just this one the original one? It works really good I found if it looses me, it struggles to search/find me again, in the code is it suppose to search left to right if the signal is lost to search for the signal again? Is it possible to add that in Thankyou

[@jackhammell1926]

Wow super cool You make it look so easy. So then could this work with other rx possibly?

[@nic.h]

As long as you can get two RSSI values. All it's doing is comparing those strengths and moving accordingly

[@TheWinnieston]

hmmm...I could add another diversity receiver, put it in a rocket, and have an anti-fpv rocket.... sounds like a project!

[@kwaaaa]

Very cool!! Are you adding tilt support soon?

[@AnttiVainik]

Tilt is not as critical as pan, unless you fly 1km high, right above your head. I'd say you could get good reception kilometers away just by bending antennas slightly upward. Adding tilt with only 2 antennas is going to be tricky, I didn't think it thought initially, but I'm going to try. Is it going to happen soon, I don't know. Its winter time here in Finland, it gets dark around 4pm and its cold. I'm hoping people will pick up this project and do more testing.

[@henryhartl]

Antti Vainik hi, maybe you try with Second diversity. With 3x helix and 1 cloverleaf. Use only 3 helix for rssi tracking.

[@shamimmoohebati]

Thumbs up to you guys. this is the most easy and clean RSSI tracker I've seen here and there. Do you think I can use Nano 328? Thanks

[@AnttiVainik]

Thanks Shamim! Arduino Nano is a very good choice because you can program it via USB. And probably will fit inside RC540 too.

[@shamimmoohebati]

Thank you for your quick response. Actually I tried a few minutes ago but I got this error; "compilation terminated. exit status 1 Error compiling for board Arduino Nano" Any idea? I can connect the board and do some basic example like "blink" and it works with that command but I cant load or verify your codes.

[@AnttiVainik]

I don't think this error is related to code. First make sure you have installed Servo and Timer libraries. After you have done that, try selecting Arduino Leonardo (or some other) as target and compile the code CTRL+R. Also you can try downloading an older version of Arduino IDE and try that. I've seen weird IDE behavior, when everything works on one computer, but not on another even IDE version is the same.

[@shamimmoohebati]

Thank you for your help. I think I need to learn more about Arduino programming. I have just "simple-rssi-antenna-tracker.ino" file and I cant find libraries. Do you think you can help me through email? Really appreciate your time.

[@AnttiVainik]

+Shamim Moohebati Sure mail me

[@FPV420.]

Awesome. Could you please advise me how did you find out RSSI_MIN and RSSI_MAX values in the arduino code?

[@arielalvarez76]

Following... My servo keeps on turning, my RSSI_MIN is 120 & MAX is 400. I tried different values from 0-50, 60-200 etc. but still the same... I am using RD945 diversity receiver.

[@hassanhamdyseddik9446]

@@arielalvarez76 i also use RD945 what is the RSSI_MIN &RSSI_MAX you use ?

[@hassanhamdyseddik9446]

@@arielalvarez76 Bro is RSSI Pin is 4th from right?

[@captainKts]

I have a Boscam RX-LCD5800 diversity video receiver, it has very similar electronic components to yours, almost identical actually. Do you think the rssi solder pad is the same pin as yours? Is there any way I could know?

[@AnttiVainik]

Many receivers use same/similar receiver modules. Open your receiver and see if there's a module inside. You can then do a google image search "5.8ghz receiver module". There are plenty of images that show the RSSI pin.

[@captainKts]

@@AnttiVainik ok I've got my rssi pins covered, but I can't flash the Arduino for the life of me. I'm not sure what I'm doing wrong. "An error occurred while uploading the sketch" any help will be much appreciated. The KZbin videos are not very helpful. Edit: Arduino flashed with timer.h Last question, what's powering the Arduino during use? The regulator out arduino and servo power are soldered together at the board?

[@leoponce82ponce]

So, how do you find the RRSI pin in the RECEIVER module? how did u know it was the 4th pin?

[@droneman1799]

Awesome project,,can you make video on how you program the arduino,i need full details,,make video on full tutorial,i see this video but its not complete,can you please make video to how program the arduino? Thanks for making the video

[@jimkehoe6495]

outstanding! thank you so much

[@spunashell]

You could build this with any diversity receiver right? As long as you can get the RSSI out of it? I am thinking of building it with 5808-based diversity receiver.

[@AnttiVainik]

Pretty much yes. You need 2 separate receivers and 2 rssi signals, the you can do it.

[@IBMSmaker]

this is a very nice mod. I have the Quanum V2 Pro Goggles vor visitors. i will try this to build :-)

[@dennisstockwell9444]

Looks great, but would have been more impressive if you had mounted the video camera on top of the tracker.

[@AnttiVainik]

Dennis Stockwell Great idea! I have a zoomable lens, that should look good.

[@megadork9]

Did you have to use a longer screw for your servo? I dont really understand how the servo attaches to the GoPro style bottom plate.

[@AnttiVainik]

It's a normal servo screw. Do you know those round servo "arms" that come with every servo, basically it's the same thing.

[@diystuff5628]

suuper!!! dont forget to post the tilt addon !!! ;)

[@AnttiVainik]

DIY stuff I was planning to, but now I have new hobby called parenting :D. Might take a week or a year or so ;)

[@EnplusX]

Great job, real FPV pirate spirit.

[@Chris-vc1dh]

I want to try to make one really but what type of the board should I get?

[@airplanegeorge]

the replacement camera for the 110 says it is 12v, I measured the voltage at the camera connector and got 4.5. What voltage camera should I use for an upgrade. any camera you would recommend? I measured that voltage with the camera unplugged, is that ok, didn't seem to blow anything up. thanks for all the info, I ordered a couple of those cloverleaf antennas last week, would like to do both antena and camera mods, couldn't figure out how to adjust the focus till just now watching your video, so thanks for too. i'll try focusing it first but my main problem is picture breakup and those flashing colors you spoke of. that little 110 sure flies good though don't it?

[@AnttiVainik]

Camera, cloverleaf? I'm guessing you commented on wrong video.

[@airplanegeorge]

don't know how that could happen. guess I didn't notice the video had changed. your tracker is pretty cool though, saved your video for a future project. (after I get my camera working)

[@AnttiVainik]

No problems, just thought to tell so you could get the answer to your question eventually :)

[@jujucattys156]

what other resiver use this discontinued

[@thrilleex]

Can you just build two of these , mount one sideways and then create/print a contraption for each servo so they move the whole device ?

[@sebastianwilliamnee1998]

thrilleex at this point you might as well get a 4 way diversity receiver. With 3 patch antennas you should be able to get your left-right and up-down tilts, and with the fourth you could put a cloverleaf for proximity

[@sirhaugen1025]

Will this work on my 1.3GHZ receiver from readymaderc as well? As long as I know where the RSSI pin is?

[@funaro13]

got a. D58-4 it has Tracker output, do I only need the Arduino board for mounting?

[@ahmednasr9977]

hi antti .. my graduation project discussion will be tomorrow and i have a problem .. when i use 2 helical antennas the values of rssi never change .. i test the 2 helical and they work ..but when i use 2 omnidirectional the rssi values change ... i use RD945 diversity receiver and i can't find a solution .. I'd be grateful if you help me.

[@AnttiVainik]

Hard to say without seing your project, but one dumm mistake i've done is mix sma and rp-sma connectors. If there is absolutely no signal from one antenna, that could be the case.

[@dobosatti64]

How can I put the code on the arduino board? It always indicates a wrong translation to me!

[@truog2003brasilia]

These tracker work with another receiver? Like RC832?

[@mikesmith1290]

Just a quick question. I tried this on the quanum 2.4 version, and I'm not sure if the RSSI pins are the same as this one. How would you tell which one is for the RSSI signal?

[@RubensCampello]

The rssi 2.4 pins are arranged laterally, not the same as the 5.8 (4th pin), just pick up the RX name written on it and find the datasheet. I did and it worked with these same code parameters but I will try to refine the settings. Good luck.

[@kermets]

Hello Antti, I just order the Rx from HK as they have free shipping at the moment and tried programming a nano and it seemed to take the sketch, as i dont have the RX to test do you think theres any reason the nano wont work ? it moved the servo by touching A0 and A1 with fingers. cheers Brett

[@AnttiVainik]

If the servo moves by touching analog inputs then it's working, congratulations. You could wire a couple of potentiometers to A0 and A1 to simulate RSSI signal. Then you can go and play around with #define values to understand how everything works, while waiting for the RX.

[@Ahsanullah-hk9rd]

I want to track drone which can be 200 km away from me. Is it Possible to do this using RC540R diversity video receiver. Thanks

[@AnttiVainik]

Absolutely NOT. This tracker is relative, it does not know where your drone is. If tracker looses lock, it may not recover. I't's only good for proximity flying.

[@yang.6428]

Thanks, I have succeeded in making the receiver using the D58-2 signal. Unfortunately, China can not find MG Servo 1.8kg TGY-9025MG steering gear, I use the GS-9025MG 9g GOTECK alternative to complete. Currently relatively stable, consult whether it can speed up the antenna rotation speed? :)

[@AnttiVainik]

I'm glad to hear you have made one! It doesn't really matter which servo you use, any 9g servo is fine. To increase speed you need to change these lines. The simplest way is to assign a fixed value: // move towards stronger signal if (avgRight > avgLeft) { ang = 2 * (SERVO_DIRECTION * -1); } else { ang = 2 * (SERVO_DIRECTION); } But that will make tracker to rotate at constant speed at all times. A better way would be to use exponential curve: ang = pow(float(avgRight / avgLeft), 10) * (SERVO_DIRECTION * -1); You will have to experiment to find a good exponent value. 10 might be a good value to start with. Let me know how it goes.

[@rcmodelsgr]

Nice job mate pls share the Arduino code thnx!!

[@AnttiVainik]

Hi Yang, you wanted more speed. I added exponential and sigmoid tracking. Check out new code on Github.

[@yang.6428]

Wow! see the news, thank you for sharing. I'm going to download the update as soon as possible test results. These days after the snow to test, eager to see the effect. I am from advertising related work, before flying four axis aircraft never touched the microcontroller technology, this time without your help must not complete the production, thanks again. Expect more perfect results.

[@yang.6428]

In fact, many previous concerns about the RSSI device on the KZbin, this is the first time in your help to achieve production, feeling very cool, ha ：）

[@TopperDanny]

Hi, Got the set up all built and looking forward to using the idea. Only have had one issue so far which is that the servo isnt responding. I have it set on pin5 and powered from 5v. Ive tried a couple of different servos with no luck. Ive included the timer and servo libraries....any ideas???

[@TopperDanny]

By no response I mean it just slowly ticks round to its max position then binds...

[@AnttiVainik]

Hi. If it slowly ticks to max position it means that, arduino is working and performing calculations, analog measurements are measuring rssi values that are very close to each other (slow movement). I'm assuming you have vtx on an rx is set to corresponding channel. The next thing I would do, is check out debugging information via serial monitor (Tools/Serial Monitor in the IDE while everything is on and connected) Is it possible, you soldered RSSI measurements to wrong pins in vtx? If you cant figure it out, contact me at firstname.lastname at gmail.com

[@zxrd2753]

@@TopperDanny¿Resolviste el problema? lo mismo me pasa a mi

[@Minerillo_FPV]

@@zxrd2753 Buenas, lo has resuelto tu? Yo estoy igual jajajaja, no se mueve el servo pero en el monitor veo que va variando poco a poco de un lado a otro...

[@zxrd2753]

@@Minerillo_FPV estoy a la espera de probarlo en el campo, en casa no funciona, pero mi servo si se mueve muy despacio hacia la antena dominante hasta que llega a los 180 grados y ahí se queda. si tapo la antena con la mano si gira al lado contrario, yo tengo el fr632, estoy seguro que es algún problema de calibración de los offsets o algún otro.

[@junsal4]

Hello Antti, can I use a ATmega328P Nano? How do I wire it? It doesn't have 5, etc. Instead it has D2 to D13.

[@TheWinnieston]

Don Sales yes, the pins are the same mostly. Just look up a pinout

[@SladkaPritomnost]

Interesting, have you had a chance to test it with more narrow - higher gain antennas? Can the nano follow fast flying with more directional antennas? I love Finnish language btw ;)

[@AnttiVainik]

Ufortenately I haven't...babies wifes etc. Now I have Z-84 with EzUhf and 800mw Unify HV I've been flying with Fatshark + deversity, so far max range 2000m with patch antenna. I'd be really interesting to test it with the tracer and 9 turn helical.

[@austntexan]

Hope you're able to test with the 9 turn helical too! There's a KZbinr called JD FPV and he's getting incredible distance(out to 22km) by using helicals w/ 2x FR632 receivers and an Eagletree Eagle-Eye diversity controller. Wondering if this AT would be able to get similiar range?

[@SladkaPritomnost]

Helical are great especially for GPS trackers (they can point quite accurately to a fpv object), for RSSI based trackers I 'd recommend using antennas without side lobes for better stability e.g. ibcrazy crosshair or patch (or biquiad for linear polarization). This way RSSI tracker should stay cheap, simple and more reliable.

[@tuxpilniq2238]

YES!!!! absolutely awesome solution m8, it also works with Skyzone RD40 Video Receiver the only investment was arduino leonardo all the rest i did have lying around,and my father has made diy antenas, can not wait for propper field tests but by the first testing in short distance worked GREAT!!! now i do regret i dont know anything about codes, i bet there would be easy to implement 2 diodes, both off vhen no signal and when its signal than moving right- right diode on- moving left -left diode on ... just for control check. How is your tilt addon continues ? anyways THANK YOU FOR SHARING!

[@AnttiVainik]

Glad to hear you made one. I can't seem to find time and weather for proper pitch development. Last time I went flying it was -20°C, the gyro froze and my Z84 fell out of the sky like a brick, 2 minutes after take off. I ordered new servos from HK, TGY-180D 180 degree. Im hoping I can modify them to turn even more...we'll see.

[@FPV420.]

Hello Tux Pilniq, I have the same receiver and all I get is servo movement in one direction. Could you please advise me what were your RSSI_MIN, MAX values? Did you make any other changes to the code? Thank you!

[@tuxpilniq2238]

I did not do any code changes

[@kelleysislander]

I watched the video of how to include an Arduino library... So if I understand, we have ONE "Timer" library which has everything we need for the Arduio part of the project. The Arduino will run ONE library at a time, that being the one that is loaded, correct? So that once the Timer library is loaded the Aruino is then all set? Thanks, Bill

[@AnttiVainik]

Hi Bill. Once the Timer library is loaded the Arduino is all set, correct! If you look at the code you will see lines like #include and #include those are all libraries and you can have as many as you need. With #include we tell our project to use a library. Before you can do that you need *import* the library into IDE (downloading a .ZIP file). Now all your projects can use that library. I hope this clears things up.

[@kelleysislander]

Thanks for that, it really helps. And it`s great to now have that essential *obvious* step explained, that the libraries have to be imported first, so that timer.h can build correctly.

[@AnttiVainik]

No problem. After you have uploaded the sketch, the next thing is to calibrate rssi min and max values. Dont hesitate to contact me.

[@kelleysislander]

Thanks... OK, so to calibrate the RSSI values, first of all, where do we see the values displayed? Then, do we iteratively edit the values and recompile and upload the sketch, then repeat as necessary? Thanks, Bill

[@AnttiVainik]

Sorry for the delay. In simple-rssi-antenna-tracker.ino sketch uncomment (remove //) //Serial.print("RAW RSSI: "); //Serial.print(avgLeft); //Serial.print(", "); //Serial.print(avgRight); Then upload the sketch and open /Tools/Serial monitor or press CTRL+SHIFT+M. Now you should see RAW RSSI values. See what they are with video transmitter off and on and assign those values to RSSI_MAX and RSSI_MIN.

[@netmonk]

What's your pid for your tracker ? :)

[@kwaaaa]

Any adjustment in code or calibration needed to use the FR632 instead? I think max voltage for best RSSI is 1v for the FR632.

[@AnttiVainik]

Yes, you need to find #define RSSI_MAX/MIN values. Uncomment debug section in code, and use serial monitor to find raw values. I think RC540 max rssi voltage is around 2V. // raw rssi values, use these for RSSI_MIN and RSSI_MAX //Serial.print("RAW RSSI: ");

[@kwaaaa]

Excellent! Thanks a lot for sharing.

[@NunoFlyer]

Hi, what is the values that you find to fr632? Can you share?

[@NunoFlyer]

I checked in serial with FR632, RSSI% 5 , 44

[@qyitonefpv6551]

Will this work with non diversity receiver?

[@igorg9150]

Why you stopped doing videos? Hope you are well.

[@AnttiVainik]

I got 2 small biological drones, they have endless batteries, never stop buzzing and require 24/7 maintenance. The last project I did took 2 years to complete (3d modeling, printing, arduinos, rf-modules and writing code) Every time I had a couple of hours, it took 1 hour to remember what I was doing. I've noticed that some other rc guys on youtube have experienced same fate. So I'm doing well, just taking care of my little drones. Best wishes to you.

[@kelleysislander]

Hi, very cool tracker. I want to build one but the arduino source code link is dead and the HK servo link is dead. So cannot build one since no Arduino code. Can you re-post please?

[@AnttiVainik]

Hi, I just checked all links and they are all valid! Can you google for "simple-rssi-antenna-tracker" at the moment, Github link is 3rd from the top.

[@kelleysislander]

Thanks for that! I was using my iPhone and for some reason the link was giving a 404, but now in the actual browser it works ;)

[@josemezaferrada5560]

if I use two video receptor of diversity, can i do the tracking in pan and tilt using the same program? can i use an arduino uno and a servo of 20 kg/cm?

[@AnttiVainik]

Sure Arduino Uno will work, and I think pinout should be the same. 20kg/cm is ok, even though its quite big, I'm using 1.8kg/cm. Make sure your 5V regulator can supply enough current for your servo. Funny, I never thought you could use two diversity receivers, but it should work :D just turn one of them 90° for tilt. Cool!

[@GoatZilla]

I built something similar; so far I've gotten 600m range with a 25mw vtx.

[@AnttiVainik]

Sounds great! What kind of antennas are you using?

[@GoatZilla]

I'm using Aomway patch antennas (mostly because I think the patch antennas are slightly more portable than helical antennas). kzbin.info/www/bejne/g5OXhal7q65_pJY The signal is clear all the way out to 600m except when the frame itself is blocking the antenna; I need to reconfigure the quad and put the vtx antenna on the backside.

[@ghostlyfrog9521]

Can anyone help I'm trying to wire this together and the power comes from the xt60 up through the 5v step down, then where does it go connect directly to the servo connectors? How does the power connect into the arduino?

[@alvincrazy6664]

hello sir Im interested to build your tracker sir i have question is it possible to used 2 pcs 1.2ghz vrx? or is work in 1pc 1.2ghz vrx only? thanks you

[@AnttiVainik]

All video receiver discussed here have 2 built-in receivers, but you can use 2 separate ones, as long as they have RSSI output. So the question is, do you know a 1.2GHz receiver with RSSI output?

[@AlexCausey]

Fantastic..!

[@NOXFPV]

Can this be done with a non diversity rx?

[@bragee]

Love it.

[@niedertron7543]

Could someone please confirm that the required arduino model does have to be flashed prior to use? Thank you!

[@AnttiVainik]

Yes, you need to flash it. The instructions are in github (link in the description). This project uses Timer.h, you will need to download this library from github as well and import it in Arduino IDE (links and instructions in github README.md)

[@nikositalos3645]

wow did you sell it?

[@jester3265]

Sorry this is an old video but there is not a lot of information on this diversity unit. What diversity lovely do you have set and what diversity time please? My thanks in advance.

[@AnttiVainik]

Hi, DIVERSITY_TIME=1 and DIVERSITY_LVL=1. I got my values from RCModelRevievs. Cheers.

[@jester3265]

Antti Vainik Hiya, I couldn't find the field test with rcmodels However thats fantastic to see some figures, thank you so very much for taking time to reply. I will enter those figures asap and start to enjoy flying using diversity. Respect. .

[@dutchflyingwings5862]

Hi there Antti. Do you have any adea about the range of this setup? Cheers Arthur

[@AnttiVainik]

Hi Arthur Ironically I never tested max range. Back then I didn't have anything with RTH. Now I have a Z-84 with iNav, but i'ts winter again, and flying is really challenging.

[@dutchflyingwings5862]

Looking forward to your experiment with the Z-84. Good choice for a wing :)

[@kelleysislander]

What exactly is the timer.h for? Is this necessary for the project? Thanks ;)

[@AnttiVainik]

Yes it's quite necessary. Timer is responsible for scheduling and synchronizing tasks: RSSI measurement, calculations and servo movement.

[@williamtrepp579]

Does anyone know where the pin outs are for fat shark modules cause I’m curious if you could do this with rapid fire or true d or a combination of both!

[@bawfpv]

hello antti, my tracker position is reversing, it should be left and right, but my drone moves to the left to the right tracker and vice versa. how to solve that problem ...

[@AnttiVainik]

In the source code there is #define SERVO_DIRECTION 1, just change it to -1. It will reverse servo direction, simple as that.

[@AnttiVainik]

If you are too lazy to modify the source code, you can just bend the antennas pointing inwards (cross eyed) or flip the receiver upside down, this should have same effect.

[@bawfpv]

amazing...thank you antti ... it worked. Good luck. I'm waiting for the next video

[@bawfpv]

@@AnttiVainik RSSI_OFFSET_RIGHT and RSSI_OFFSET_LEFT , filled with what number.....

[@AnttiVainik]

If the tracker doesn't have constant offset in either direction, you can ignore this value.