Superalloy - A Material That SHOULDN'T HAVE BEEN CREATED!

[@Paddydapro]

I did a guided tour at a german turbine manufacturer and they told me the turbine blades are made out of monocrystalline material and they use a casting technique with a crystal starter to get a single crystal. Machining is then done with erosion technique and extremely precise grinding because the weight of each blade has to be exact so there is no vibration and imbalance.

[@prapanthebachelorette6803]

Interesting

[@JohnMullee]

Ti-Al

[@thorwaldjohanson2526]

Was it MTU Aero Engines? I worked there :)

[@mememaster147]

Was it inconel or something exotic? My dad used to work at Rolls Royce and they started doing single-crystal titanium turbine blades in the 80s or early 90s. The previous stage was getting the crystals to grow so that they were orientated along the length of the blade.

[@anthonylepore516]

I have also heard of this! Seems like a lot of materials and a lot of time to fashion and create such a scientific war machine, but it also makes me wonder how the Germans got the time and materials beings it was the ending of the war!

[@lorez201]

That was incredible! You should do an episode about single crystal superalloy turbine blades. They're even more durable and the manufacturing process is super interesting. Might not be something you can demonstrate at home though.

[@ph11p3540]

Good luck with that. Most of the info on that system of manufacturing is still a very closely guarded secret

[@dergunter1237]

demonstrating that at home is very unlikely, you need very specialized machines. single crystal alloys arent necessarily hard to do as the alloy itself but rather creating the environment to cause the alloy to form a mono crystal is the issue.

[@lorez201]

@@ph11p3540 I hate trade secrets so much lol.

[@AndrewMerts]

@@ph11p3540 Other than the black magic metallurgy the process for single crystal growth is simple enough in concept, it only gets fiendishly complex when talking about how you actually implement it. When the liquid metal alloy solidifies it will tend to solidify along an existing crystal. This means if you have the mold cavity tightly thermally controlled you can use a corkscrew shaped passage in the mold to start the cooling process. Before the corkscrew as the metal solidifies it forms many crystals as you'd expect but as it's solidifying up the corkscrew the geometry of it favors the crystal on the inside edge so by the end of the corkscrew that innermost grain has overtaken the others to form a single crystal.The hard part of implementing this is dealing with the precise thermal gradients, temperature control, vacuum casting, etc to actually keep the solidification process consistently along a single crystal growth boundary. Bismuth is pretty good about growing large crystals, it might potentially work to show that corkscrew method working in bismuth although I don't know if there's an easy way to show grain boundaries in a solid piece of bismuth like you can with etching steel. It might be possible to make a plaster mold and demonstrate the difference between the corkscrew passage and no corkscrew on the crystal growth as an amateur. For anyone interested in the topic there's this video that gives a bit of the history of turbine blade manufacturing, kzbin.info/www/bejne/Z6urhH5jg9GUsJI and an excellent video by AgentJayZ kzbin.info/www/bejne/oHTFZ2CCfMuYfsk

[@sterling9257]

@@AndrewMerts 6:12am how would have know the metals cause such reactions. 😊

[@ag135i]

This is the best chemistry channel on YT and the guy explains scientist's level stuff in basic and understandable form, kudos 👍.

[@billynomates920]

i'll let periodic videos, nile red/blue and that bowtie guy know they need to up their game! 😃

[@info-load7952]

I wish I was half as much of a backyard scientist as you. You are one of the best channels.

[@stevengill1736]

I remember my excitement as a high school student when I visited an engineering metals shop and was given a sample of an inconel alloy. At one point I put it in a vise and tried to hacksaw a piece off....and tried is the word for it all right... ;^[}

[@MichaelKingsfordGray]

Start by investigating what your real name is.

[@GingerGigantus]

I’m an aerospace welder and we build the jet engines for cruise missiles and small private jets. It’s amazing the different materials and alloys we use.

[@lewisavinash1]

used to work for PW ;-)

[@magicsasafras3414]

And what are these alloys?(and what are the recipes?(and what are the exact ratios?))

[@GingerGigantus]

@@magicsasafras3414 don’t think I can tell you that hahahaha

[@Lmr6973]

In 1987 I was privileged to sit and listen to Chuck Yeager give a speach. And during the speach he spoke of the first time he ever broke the sound barrier. He said he done it while diving in a piston driven airplane.

[@PaulRudd1941]

That man is a legend. I definitely believe that the P-51 and Spitfire could break the sound barrier given a certain altitude and air-speed. It's totally plausible.

[@dinithaw]

You're the coolest scientist on the internet right now 💯

[@BackYardScience2000]

Much better than what Nile Red has turned into. I wouldn't even call him a scientist or chemist anymore. More of a sh*t posting channel that lost its way. Thank God for Thoisoi2!

[@NotaWrxTrek]

Thoisoi, applied science and Nilered are top tier science channels, wish Nile still made full videos tho

[@knrz2562]

@@NotaWrxTrek Nile is more of a chemist lab science

[@redallaround66]

100% hes got a cool science channel

[@randomsugarcane4950]

Both Thoisoi and Nile are great but Nile still doesn't upload

[@seldoon_nemar]

Inco is fun. it welds like a stainless aluminum blend. I worked at an electron beam welding shop for a few months and that would punch a 2"+ deep weld with a 0.02" heat affected zone. We were doing things like welding parts of the rotating assembly of 737 max engines and things like that. it was really fast too, like 100+ inches/min. at production speeds. if you tried to slow down, the weld would "fall out" because it was overheated. the beam would just slice right though and into the other side of the part. the whole process was done under high vacuum in a giant chamber, and the beam is steered with electromagnets. the welds would offgas inco and vapor deposit it in the chamber, so we had to swap out glass slides to see, and the lights inside the chamber were mirrors on the inside and just dull gray on the outside instead of you know... releasing light.

[@embersaffron5522]

You've sent me down a rabbit hole Electron beam welding sounds like black magic to my tig welding ass

[@seldoon_nemar]

@@embersaffron5522 lmao, I ended up leaving that job before I got trained (problems on their end) But I got to tool around with the machines, and yeah, they are nuts. They operate in high vacuum, so the roughing pump was a 10" roots screw blower, and the main pump was an oil diffusion pump. It's as high a vacuum as you can get without lab equipment. The beam would collide with the air Everything is done with rotation and oscillating tables, as the beam is fixed like a lightsaber. You're looking through basically a rifle scope mounted coaxial to the beam. The beam is shaped with magnetic fields and can be a fixed point, or made to spin in a circle, ellipse or a line. The tracer power to sight in is enough to etch material. Cranked up, we had a 4" round billet of titanium they used as a focus blank and it looked like a church candle 🕯 My favorite part was that it made metal vapor deposits all over the inside of the chamber. Even the light bulbs were mirrors.... The wrong way (crunchy outside, all the light reflected inwards) The scope had a piece of quartz on a slide so you could keep a clean section on the part

[@embersaffron5522]

Thats absoutly incredible. I know a bit about electron beams on liek the sterilization and medical side. But to pump enough power to weld metal is so cool. Did they ever show off with ot to the newbie or anything?@@seldoon_nemar

[@vincentwalker2081]

I am pleased that your hand has healed. Your work and videos are great. I learn much. I study quantum physics and you teach me about the chemical side. Thank you.

[@_Solaris]

This is among the best channels of its type on YT.

[@knrz2562]

Written by three Russian metallurgists, with a trove of experience in Al-Li alloy development and processing spanning many decades, Aluminum-Lithium Alloys (part of the Advances in Metallic Alloys series edited by D.G. Eskin) provides the theoretical foundations for melting, casting, forming, heat treatment, and welding of Al-Li alloys, so critical in the design of lightweight, high performance structural elements used primarily in civilian and military aircraft and aerospace in general. The book reviews the work done on Al-Li alloys since the 1960s until today, Titanium constitutes around 30% of the aircraft's Tu-160M2 Collier Trophy

[@phlynniii]

Well, thank you for all this information and your hard work. You do it right. The best channel for chemical perspectives. Thank you so much

[@bigjay875]

I would love to see you attempt to forge this home made alloy just remember to heat it as you hammer it to prevent cracking. I'm a welder that have worked with many different human made metals, and I get quite a kick out of playing with new and unusual metals. Love the Chanel and this is yet another exelent video keep up the good work 👍

[@TannithVQ]

I love your channel. Please don't ever change.

[@Nuovoswiss]

Important correction: Young's Modulus (AKA Modulus of Elasticity) does not change much with temperature, the Yield Stress does. Hot steel is nearly as stiff as cold steel, but the amount it can deform elastically is much less. Also, I don't think aluminum powder is capable of reducing titanium dioxide, I think you need magnesium powder for that.

[@absalomdraconis]

Might be some temperatures and/or pressures where that changes, but yeah, for shirt-sleeve conditions titanium reduces aluminum, rather than the other way around.

[@Nuovoswiss]

@@awashburn6944 I guess I'm thinking that most metals are not used at temperatures where their young's moduli start to deviate much from their room-temp value, but you've got a good point for high-temp alloys.

[@appatula]

As soon as I hear "Helloo Everybody!".......I know exactly what time it is. Thoisoi time!

[@annfarmer9704]

Thank you! That is a lot of work you put into these wonderful videos. You are awesome!

[@scottwilliams895]

"afterburner, when an engine works like a rocket" A surprisingly short, informative and useful description!!

[@danawilkes6174]

Did anyone notice the structure of Inconel. It looked very similar to the stones they used in building massive structures thousands of years ago. The stones they used were of all different shapes and sizes, and they were almost earthquake proof, because of that. His statement, saying that because of their shape, they were pretty much locked into place.

[@johndelong5574]

Strange how primative ape persons got lucky like that.

[@snakewithapen5489]

@@johndelong5574 this is a chemistry channel, put your racism away

[@johndelong5574]

@@snakewithapen5489 Your virtue is duly noted.By the way, what race are apes?

[@joelnorton9742]

If it involves thermite it's a chemistry win!!! Exciting reactions! 👍

[@absalomdraconis]

Some more exciting than others, avoid copper.

[@henrysiegertsz8204]

Outstanding video as always, and your English spoken accent is a fantastic fit for the highly technical subjects covered!

[@unnmaed]

Great visual demonstration. Thanks

[@zeph0shade]

As someone with an obsessive interest in making complex devices, I loved the neodymium magnet fix for the induction heater. I very much want to build my own induction heater soon, and I know it'll be far from the efficiency of a commercially available one, but it's nice to remember that whatever I end up making is in fact subject to the same laws of physics that those commercial ones are. That the potential problems those can potentially have aren't any more or less silly than the ones my DIY build will inevitably have.

[@chadx8269]

Excellent presentation and the Comments are excellent too!

[@jimhamilton4074]

I can't wait to get some of these metals to machine into very strong parts! Excellent video!

[@OtherWorldExplorers]

The only thing I can think of that comes to mind is harder than inconel is an unpopped piece of popcorn

[@RomanoPRODUCTION]

Nice video about special alloys. Thank you Thoisoi2-san :)

[@CCAGENT008]

Straight outta this world performance and characteristics!

[@juanitosuriel6931]

Beautiful video, Very educational, and by the way your English has improved 100%. Thank You.

[@kpc5]

Nice to see a channel with so many subscribers not begging for money.

[@gyrogearloose1345]

Really enjoyed your video Thoisoi. Thanks!

[@that_one_helljumper]

I like the Aperture shirt, nice throwback to Portal and very fitting of the channel

[@jackdurden466]

From just the simplest of his tests of the metals it’s definitely showed that the carbon steel that’s most often what sword blades of decent quality isn’t the worst choice. Especially along with price. I can’t imagine what an actual sword blade of approximately 30-40in and 1.5in wide would cost made of the super alloy! Yet I would bet that it would last for a very, very, long time. Plus also hold its sharpness for longer than other metals as well. I am certainly NO metallurgist by any definition, but I do understand the basics of metals. This was incredibly informative! Thanks! I only wish I had the ability to work with such metals and forge them into various things. And it would cost a small fortune! And that’s only if I didn’t burn the house down too. Awesome video!

[@emandejnozka1369]

My right upper femur ball joint (hip) is an inconel alloy. Guaranteed not to rust, bust, bend, tear nor rip at the seams!

[@aellis6692]

I am a aerospace welder and I happen to be certified to weld 718 inco it's a neat metal

[@jasonmajere2165]

What's the pay range of said job and how much extra training over welder?

[@kgpp2293]

Awesome work dude great detail and demonstrations

[@fishtree2636]

Quite a brilliant introduction to super alloys. Thanks

[@she0051]

I love your videos but you missed one bit about the turbine blades that they are often grown from a single seed crystal to improve strength much like silicon wafers :)

[@bion247]

I was a gas turbine mechanic in the navy. Those little holes on that example you shows lets bleed air through and makes a cold blanket of air that insulates the blade against the heat keeping it from reaching those high temps.

[@txemanovelo]

Best science channel in YT! 🙌🏽

[@jamesihara]

Superalloys are really inspiring

[@EastBayFlipper]

Inconel is also used as material used to grind other materials because of its toughness. There is however an issue, it looks like cast iron after it's been used for a while. The problem isn't cosmetic, the problem is if it gets recycled, the material won't melt into iron. The results are billets of iron that are unmachinable because the cutting tools keep being broken off. It's a real problem

[@yelims20]

you'd think they used a magnetic separator... Inconel isn't very magnetic

[@eschelar]

Great video, but that cat at the end was the icing on the cake. What a cutie!

[@roycezaro1998]

This is like a Project Farm video! Love it

[@PenPen-l8f]

I prefer this voice over. Newer videos are okay but this voice is the real deal.

[@treybarnes7932]

I'd like to see some experiments with the alloy you made vs that strip you bought. That was a cool termite reaction.

[@guarami1]

Termites be different over there...

[@billynomates920]

@@guarami1 😁

[@treybarnes7932]

@@guarami1 Hey. Don't make fun of my Canadian accent lmfao.

[@derek20la]

9/11 was the best example of a thermite reaction.

[@craigslist6988]

no point, he didn't get anywhere close to making inconel lol at least he apologized to materials scientists, it's a big understatement that it's more complicated. As disappointing as it is for a youtube video, you can't make superalloys in your backyard. Unless you spent millions of dollars equipping your backyard..

[@amphibiousone7972]

Boss you are a great educator. Great Successes Many Blessings 🤘🏼

[@Bigredkarl]

I used to make super alloys and vinadium is one of those rare ingredients used in turbine engines and we would induction melt under very high vacuum using oil pumps if that helps

[@chaosopher23]

I'm a machinist, and got a print for an in-house part to be made from non-magnetic stainless. Pick it from scrap, the supervisor said, so I picked my 25 mm bar and chucked it into my lathe, a South Bend made in 1930, leather belt drive and HSS tools. It burned the HSS, so I put a carbide tool in, and the carbide also burned up. Turned out, someone put a piece of 718 in with the 316L by mistake. The boss forgot where it came from, too! It was a whole meter long, it must have cost $1000! And he forgot about it! I got to turn this piece into refractory molds when an order came in for 718.

[@michaelbedford2993]

I am thunderstruck watching this 0.o lol. Thanks for all the efforts in putting this video together! You just gained a subscriber.

[@pwmiles56]

Some of the key improvements to Inconel, for use in the first jet engines, were made in England by Leonard Bessemer Pfeil. I've often wondered how his parents chose the name!

[@trespire]

Not as bad as Isambard Kingdom.

[@pwmiles56]

@@trespire Kingdom was Brunel's mother's maiden name. Bessemer was a famous metallurgist (sorry if you knew that), Pfeil senior was an accountant.

[@davidschwartz5127]

I've heard a story that somehow some plant-touring Russian scientists stoled the material composition of that Inconel material by intentionally walking to the metal shavings at a lathe when a sample was being prepared for testing and then analyzed the shavings when they returned home.

[@trespire]

@@davidschwartz5127 That's not a story. That is a well established trick to steal chips / dust / gold. One way to prevent such industrial espionage is to provide "safety shoes" to visiting guests.

[@gyrogearloose1345]

@@trespire Not as good, I say!

[@bendeleted9155]

I have a handgun made with scandium/aluminum and titanium alloys and the thing is so light that it seems like a toy at 1st, but has very punishing recoil with full pressure loads. It's so light it uses a pocket clip instead of a holster 🤣

[@logicplague]

I certainly wouldn't carry it that way, handguns should always be carried with some kind of trigger protection.

[@bendeleted9155]

@@logicplague I can see how you would say that, but the belt covers the trigger and it's more secure than the expensive holster I bought for it, and other guns I've been carrying daily over the last 35 years, this one for 17. 👍

[@logicplague]

@@bendeleted9155 Fair enough, as long as it has something.

[@DropTheHammer556]

? What pistol is this? Not that I need an excuse to blow even more money on my firearm collection....

[@kg4boj]

@@DropTheHammer556 S&W 340 pd models

[@LiborTinka]

You can make a video about refractory materials such as Hafnium and Tantalum Carbide.

[@FedeG86]

It would be nice to make kitchen tools and/or knifes with that super haloid. If you can, ask to your friend blacksmith to he can help you (I'd like to see what he could make). Very good video program as always. 😀👍

[@Thoisoi2]

Inconel and other superalloys are not suitable for making knifes because they are too viscous and don't get sharp.

[@FedeG86]

@@Thoisoi2 I see. Another elements that I thought are plates to cook fast food, pots and trays for oven. Do you think Inconel would be good for those things that are used in direct contact with flame? Thank you very much for your answer. 😀👍

[@Thoisoi2]

@@FedeG86 Kitchen stainless steel is good enough and much more cheaper than superalloys. They are used primarily in special conditions.

[@MolexGamePlay]

I´m surprised that out of all the comments here, Thoisoi chose the one about kitchen utensils to respond to :D

[@andrewbaker234]

Great video, thanks.

[@seigasuki]

I was expecting your cat at the end. I was not dissapointed. 😆 Thanks for this cool video. I'm a big fan of F1. Can you make some video of the materials used there? Thanks!

[@Wombbatts]

How about a follow up video covering crystal control when casting super alloys, how a cold block on one end of the casting mold and a hot kiln on the other end creates linear crystal growth, like a bundle of rods. The addition of a pigtail after the cooling block forces the multiple rods into mono crystalline structure. All of that happens before the solidification of the cast blade itself, which will be mono crystalline. Mono crystalline castings exhibit the greatest strength and stiffness of super alloy turbine blades. The inability to create mono crystalline super alloy blades prevents the chinese j20 from achieving super cruise. If they want to fly as fast as Americans they need to use after burner, which gobbles up fuel and provide a great signature for heat seeking missiles. Making their stealth plane, non stealthy.

[@sarojaband4664]

I appreciate your detailed answers. Do you know anything about DU depleted uranium ordnance?

[@Loschh]

I work with inco everyday. It’s damned impressive material. Thanks for the video!!

[@DCG909]

Former sheet metal engineer. "designed" a mold for "bending" the outer edge of Inconel 625 sheets so they could be welded into round tubes easier. It had to be done in one go due to it hardening further with every cold deformation. Also reprogrammed a laser driller to cut holes under a angle of 20° in the flat state of the sheet.

[@nealthomson9505]

A very common alloy is aluminum/magnesium, used to make mag wheels for cars. It was originally developed to build ships but an incident at the end of the second world war where a torpedo hit the engine room and the METAL ship started to burn. They had all that metal laying around for years until someone started using it for mag wheels and I have not heard of a mag catching fire yet. . . . Thank you for your program TGC Blessings:)

[@b1lleman]

Extremely interesting video. Congratulations !

[@josephpacchetti5997]

Very Interesting Video, Thanks For Posting. 👍

[@othyvitswamba1111]

As always, very informative.

[@S.Bruland]

I have worked alot with machining inconel 718, if you want to drill it you need slow rpm

[@paulmobleyscience]

Would this alloy help with Tellurium embrittlement for MSRs?

[@I_SuperHiro_I]

I just visited the Wright Brothers hangar last week. Pretty cool stuff. That plane could be dismantled to fit inside.

[@biggerandbetterthings7222]

The pictures of the metal crystal structures was super neat!

[@Doug_in_NC]

The crystal structure shown was from a single crystal super alloy, not IN718. IN 718’s structure looks much more like a stainless steel, which isn’t surprising since it’s basically stainless steel with some of the iron replaced by Nickel. It’s technically an iron-nickel superalloys. The iron was removed in more advanced superalloys.

[@mumujibirb]

it feels like they just mixed every element that has some good qualities and got a satisfying result

[@Slop_Dogg]

Hey, that’s chemistry/metallurgy. You can try to estimate the properties of a metal alloy, but you can’t be completely certain until you’ve actually made it

[@samzx81]

You should do a video on high-entropy alloys!

[@spiritzweispirit1st638]

Thank you' Great video!That's an incredible accomplishment! Im wondering if 'Graphene' in any way' is a possible 'additive advancer' of super alloys?! Thanks again! 🖖🌎🌍🌏🕊️

[@Buzzhumma]

You are the super alloy of the internet right now ! 👍🏻

[@Photosynthesisbeing]

You deserve so many more views and likes, sadly the world is caught up in memes and roasting each other.

[@Anenome5]

The secret to powered flight, for the Wright brothers, was the aluminum engine. Previous attempts at a glider with engine used steel engines that were simply too heavy for the designs of that day. The Wright brothers actually painted the engine black to try to hide the fact that they were isn't aluminum.

[@almightyyt2101]

The molecular structure of the superalloy reminds me of how the walls are put together at ancient south American sites with the irregular shapes that cants move past each other locked in place

[@porkins1802]

excellent video, keep up the good work

[@christopherleubner6633]

I had a plate of iconel similar to yours but a bit thicker. Ended up cutting knife blanks out of it with the waterjet cutter at work. That will slice and dice almost anything 🤓😁

[@yoppindia]

how did you sharpen it?

[@rato7718]

good video and I have a question, what about it's magnetic properties?

[@Doug_in_NC]

Superalloys have a crystal structure that’s basically the same as stainless steels, and thus aren’t magnetic.

[@darthvader5300]

Cobalt is key to everything. Cobalt is the only high temperature metal that can make all high temperature resistant and high temperature melting point alloying ingredients to dissolve completely together and having no alloying flaws in terms of unmixed particles of alloying ingredients.

[@hominidaetheodosia]

Instructions unclear .. now I have termites … 🐜 Seriously dude be proud of your cool accent, it’s so distinctive!

[@helmutzollner5496]

Thank you that was very interestimg.

[@w__a__l__e]

when i was a machinist i machined inconel crap is it difficult.. i forget off hand the inserts we used but from what i remember they were expensive and didn't last long..

[@dinosaurcomplaints2359]

What is the electrical discharge in the background?

[@MrJBA79]

I'd love to see what happens when super-alloy materials become inexpensive and widely used by other industries like construction. We're one breakthrough away from building structures that reach right into space through a combination of super-alloys and active support appliances.

[@freevipservers]

You should do some research into the strongest metal alloys ever: maraging steels

[@bapibarman7484]

He never mentioned strongest alloy. I think he mentioned it as heat resistive alloy

[@freevipservers]

@@bapibarman7484 No im saying he should make a video on maraging steels aswell.

[@BigCroca]

this super alloy is pretty close to it anyways

[@motoflyte]

Excellent video. Thank you

[@Kohlenstoffkarbid]

Another interesting type of super alloys are tantung and similar chromium, cobalt, tungsten alloys. These are much harder but also brittle. They do also keep the hardness at high heat.

[@anthonylepore516]

You’re content is way better than red Nile ! Keep up the great chemistry!

[@migalito1955]

Great video as always...

[@Tark0r]

Thank You, Thank you, I will used this Alloy 718 for my new invention Factory

[@amitkhetmalis5967]

congratulations for 1 million in advance hope within month you will achieve them

[@gogartymike]

Yea, great video again. Keep up the great work.

[@MegaCyrik]

Fascinating. I wonder how is its conductivity? Is there a mixed alloy as well that conducts better than pure copper or gold?

[@kyzercube]

I saw a Typhoon airshow video a few years back that almost made me piss myself! The pilot was a true Maverick doing a ground bank maneuver that came within a few METERS of the back of the jet hitting the ground! The guy that was filming it was like " SH*T SH*T SH*T!!! " as he was literally right next to the Typhoon's location! 🤣

[@samuelb.9314]

Amazing video, well done :)

[@calangel]

I wonder why rhenium wasn't mentioned in this video about superalloys and jet turbines?

[@markshort9098]

Drilling any stainless with a pistol drive doesn't work well, stainless tends to work harden really quick so it needs a high feed rate and not allowing the cutter or drill to dwell or it'll work harden straight away and won't cut

[@targuscinco]

You can make that a lot easier. It's just baby powder, milk and ground wood nitrate. Leave in the sun for 2 days, drink and stir heavily. Powdered sugar can help or you can substitute powdered cow horn if your vegetarian.

[@africanelectron751]

Excellent video, cool shirt btw

[@Victor_Marius]

That microscopic image looks like a organic tissue with rectangular cells. Let's hope no one builds a robot with this alloy 😅

[@victoryfirst2878]

Why is zirconium oxide ceramics so tolerant of high heat and durability ??? Would you be able to clarify that question Thoisoi2. Very informative video Sir. Look forward to your scientific style fella too.

[@weedfreer]

15:43...the blades of the compressor are each the opposite direction to the previous row. Hold 2 child's windmill sticks, one in front of the other with the blades capturing the air orientated in the same direction and blow..then turn one of them back to front and blow again. it makes a difference. also, did you mention the single crystal metal casting process which is designed such that the metal crystals within the alloy form from a single crystal meaning all the metal's structure is aligned in a single direction makeing it incredibly strong in the orientation that the blade is fixed into the disc? You had the right idea with the induction heater, only, you need to do it under a strong vacuum. I fell asleep for some of it. Also, electrosprak/EDM (Electrical Discharge Machining) technology used to drill the holes into the leading edge of the blade for the film-cooling process which happens while the engine is in operation is also pretty cool.

[@thorwaldjohanson2526]

The blades of the rotors are in the same direction, the stator blades in-between the rotor blades are in the other direction. The stator blades were not shown in his animation.