How to fit a GSXR1000 K3 Superbike top yoke conversion. Sorry its a long video but i tried to cover all the steps. Hope this helps out.
Пікірлер: 43
@mhilde77445 жыл бұрын
Covered ALL the bases w/o uttering a single word!....👍
@Peter-nu6ix4 жыл бұрын
Nice clear, concise presentation. Your stable camera shots make viewing easy. Appreciated. No apology needed for video length. Thank you for the guide. Cheers, Pete
@JohnOLooney6 жыл бұрын
I did have to trim the screen about 15mm, but I did a good job with a dremil and simply placed a trim around he edge. The toughest bit is the cable routing and the video would do well to focus on that as it it the most important bit. Also make sure you TORQUE up and the nuts as it is critical for balance at speed, especially the head yoke nut and pinch bolts. It’s truly a different bike now, so comfortable I could ride it for hours (and do now) , a true tourer with the grunt of a sports bike - whats not to love. It’s honestly the best £300 I’ve spent on my Gixer 1000
@JohnOLooney6 жыл бұрын
Brilliant video, I’m about to fit one to my k3, so this is well handy for me, thank you for your work mate and videoing it
@federicomelo19696 жыл бұрын
The best tutorial video I ever see. Greta work!!
@Para-ni5lx4 жыл бұрын
YES !! Very DETAILED. Simplified. THANK YOU !!
@TheTonyj1073 жыл бұрын
Thanks for this brilliant video, shows you everything you need to do. I am going to do it to my Honda Fireblade 954
@MotoLexy7 жыл бұрын
This is a great video, thanks. Looking at this as an option for a future bike
@panagiotishatzis73045 жыл бұрын
Thank you for your video. I have a 2015 Honda cbr1000rr repsol kai i did the same conversion. I also take off all the fairings and i like it a lot that way.
@powerofone16455 жыл бұрын
6:14 wouldn't the sheer bolts come off without the welding method? 11:45 I loved the sneaky use of the masking tape and texta to mark a drill hole....
@Thumpermad7 жыл бұрын
Thanks for sharing I didn't see any handlebar weights I don't suppose there's any bar options that will accommodate the standard bar weights maybe with steel bars or low riser mtb bars or even fatty mx bars I suppose I'm dreaming
@1terror28 жыл бұрын
Very well made tutorial, thanks! one question popped into my mind, how did you attach the brake fluid reservoir?
@jesters6008 жыл бұрын
+s1n0z Fixed it to the brake lever clamp using the original bracket ( cut down and re bent ), this can be seen in the other GSXR For sale vid at 1:09 hope this helps.
@1YODPHILLY8 жыл бұрын
look comfortable
@markgiles85274 жыл бұрын
I was wondering about the tapered bars, like you'd see on off-road bikes, can they be used? I'm not sure if these Superbike kits are designed for these types of handlebars. What options are there? Looking into it, like everything, there is so much choice. Which is good but it makes decisions difficult. 🤓
@TFA-017 жыл бұрын
if you wanted to and didn't have the original yoke, could you use normal clip-ons with that new yoke??
@lukepilkington68435 жыл бұрын
how did you mount he brake fluid reservoir to the new bars?
@CHIBA280CRV7 жыл бұрын
Fantastic " where can I get a set ? Thanks let me know..
@raf_j113 Жыл бұрын
What is the length of those brake lines please? I’ve just had the kit delivered but with only one short brake line
@Whpbikes6 жыл бұрын
Hi i have r6 2009 do u no what cables i need to buy as i have the top yoke cheers
@michaelacook10273 жыл бұрын
I don't seem to have enough slack in the cables that go to the handlebar controls for the lights and ignition. Any suggestions?
@rafaelcaroquintero72246 жыл бұрын
help I have a honda cbr 954 and I want to put a handlebar so that handlebar is left of another bike
@tonyc97937 жыл бұрын
did you have to fit new brake lines and clutch cable? waiting for my cnc yoke at the minute. thanks.
@jesters6007 жыл бұрын
Yes you need to change the brake lines, usually need an extra 4" / 100mm. the clutch cable just needs re moving.
@mohammedsulaman14388 жыл бұрын
thanks bro
@Eric-nb7vg7 жыл бұрын
what if you just drilled holes in it and installed the bars with raiser?
@panagiotishatzis73045 жыл бұрын
The top yoke of a motorcycle with clip ons is extra thin and you must fill it first with material if you don't want to have a broken top yoke.
@angelvenega36775 жыл бұрын
Where to buy and how much
@bakeredwards7 жыл бұрын
Surely the levers are going to touch the screen, wouldn't it make sense to test with them fitted.
@jesters6007 жыл бұрын
David Edwards, on some bikes they will get close and the screen needs trimming, but on this bike it worked ok.
@Roadtrips_20235 жыл бұрын
Does this conversation makes your ride position much more comfortable?
@SwagA522985 жыл бұрын
Yes, this type of conversion allows you to sit more upright and also takes the weight off your wrist.
@rockyp39177 жыл бұрын
how much height does it increase as compared to clip ons
@jesters6007 жыл бұрын
50 to 75 mm, you can now get clip ons with 75mm risers and they are a quicker and easier to fit.
@rockyp39177 жыл бұрын
Thank you so much
@epic.roadventures6 жыл бұрын
Try converting it to a CAFE RACER.. First of its kind!!! Suzuki GSXR1000 CAFE RACER!!!
@azzkam89726 жыл бұрын
So I take it the brake lines were long enough for this conversion Planning to do the same on my ninja 900 but the brake lines look too short!
@jesters6006 жыл бұрын
Azz Kam yea this one just needed the cables moving, some bikes need longer throttle, brakes and clutch cables.
@azzkam89726 жыл бұрын
jesters600 👍🏽
@mauro954rr9 жыл бұрын
nice tutorial! for 954not tutorial anymore?
@jesters6009 жыл бұрын
mauro 954rr All ready have a set of rentals on my 954. Will add more 954 vids as soon as i can.