Supercharging World's CHEAPEST Toyota Aygo Part 4 - NEW WHEELS!

[@batterynerd8779]

Where do you have the car registered? Switzerland? I live here and am interested in that kind of stuff too. Must be quite a pain to get all these mods legal.

[@MorrisHGT]

cool! but i see you forgot one wheel nut in the front right

[@ad_mddn]

did you use the original wheel bolts or buy some extended ones ?

[@curtis8516]

Paint the rear glass quarters and turn it into a sports-van!

[@dilan789]

Hey, is it really neccesary to cut up some metal?

[@TheRSGarage]

Yes mate. You'll hit the arches underneath if you don't.

[@dilan789]

​@@TheRSGaragedo you mean hitting the arches with your new wheels? I have 195/45/16 and it does not hit my arches anyway. Even with 3 people in my car.

[@dilan789]

​@@TheRSGarageAnd you did not put any wheel spacers on?

[@TheRSGarage]

@@dilan789 No I just specced much wider wheels and the right offset

[@iviw211motor3]

Que llantas más guapas donde las compraste ❤

[@TheRSGarage]

Just online. They're the Nankang NS2s

[@sayanpal9491]

What size are these rota grid V? 15x7? Is it possible to fit them without the fender extension

[@TheRSGarage]

These are the 15 x 8 ET0 Rota Grid V - they'd be far too big for no arches to be fair. The ET offset is out far to avoid any internal issues. You might get away with an ET15 on a 7 though? That would bring it in about 40mm but you'd need to measure it!

[@sayanpal9491]

@@TheRSGarage : What about 15x7 ET35/38 with 195/45/15 tyres? I'm looking to get rota zeros

[@TheRSGarage]

@@sayanpal9491 I think on ET35 you'll end up hitting the inner arch with the tyre due to the size. You might be OK, but you'd have to do some measuring I think. There is a site called willtheyfit which is very handy

[@bbc61]

What are the size of the wheels and tyres?

[@TheRSGarage]

They're 15 x 8 ET0 on a 195/45 tyre!

[@bbc61]

@@TheRSGarage do you think 195/45 r16 will fit my Aygo? Its 4x100.

[@TheRSGarage]

I can't see that fitting without issues. I scrub on this, but it's super low at the front. Depends if you want to run it low or higher. Check out willtheyfit website and put in the wheel spec and you'll see how much bigger they are and then you can measure under the arch

[@bbc61]

@@TheRSGarage thank you. Low at the front due to your suspension right? With stock suspension it should just fit i think?

[@TheRSGarage]

@@bbc61yea I think it might just about

[@stevemitten7232]

Sadly chatgertech are a massive let down mate . Good luck in the future

[@xiaofengxiaofengxiaofengxi4651]

Is it painted using using stone chip lmao

[@TheRSGarage]

Yea man. Paint was fucked anyway. This is hard wearing. Can hit anything in it ;)