Try to make the music louder. I could still here the voice
@supercheapautotv Жыл бұрын
Whoops😂
@scenicshoots Жыл бұрын
@@supercheapautotv Happy to work with you guys here in Brisbane
@runescaper13338 ай бұрын
I know it sounds the same, but the correct spelling is *HEAR*
@scenicshoots8 ай бұрын
@@runescaper1333 lol thank you. I blame auto correct :)
@scenicshoots8 ай бұрын
@@runescaper1333or I went off my rocker because the music was so loud :)
@LaurenceCYH Жыл бұрын
Great video! Helped me give up on doing it myself due to my lack of ability.
@supercheapautotv Жыл бұрын
Got it sorted now😂
@sinnerhearts7 ай бұрын
Now I can show this to someone to do it for me lmaoo
@supercheapautotv6 ай бұрын
That's what friends are for right?
@Oldtimeytools Жыл бұрын
Do not install the camera first, make sure the angle is right first.
@supercheapautotv Жыл бұрын
Good advice
@stavart132 ай бұрын
Top video, straight to the point and easy to follow. Can I trigger the reverse park sensors by tapping into the tail light?
@pyromaniac3542 ай бұрын
Yes
@adminmovie3 ай бұрын
nah i don't need a reverse cam.. bye
@Iyorioknight4 ай бұрын
Use a t-tap makes it way easier
@pyromaniac3542 ай бұрын
Yeah the ole scotch locks
@hiblackie23403 ай бұрын
The longer I’m into this the more I want to give up installing mine 😢
@levipogue62183 ай бұрын
Simple! Awesome !
@daphnethunnissen7 ай бұрын
What I don't get is how to get the wire to the front? He is putting the wire in the bottom of the boot? But how to open your door? Where does the wire come from? My boot door is opening up into the air (I don't know how to better describe this)?
@Mixwell19837 ай бұрын
You have to possibly remove the felt panel from the boot lid to run the wire over to the boot hinge. Zip tie the wire to the hinge leaving some slack. Then pull the lever for your back seat rest and feed the wire from the trunk to the inside of the car and route it underneath the bottom trim panels by the door.
@scabgrab3 ай бұрын
What if I want the camera to stay on at all times?
@PedroRodrigues-nt8go4 ай бұрын
There should be a app for displaying the câmera...it would be much easier...
@apar76883 ай бұрын
Does it always have to be the tail light splicing? What if you connect directy to the battery or a secondary fusbox and have a toggle switch in between for option to turn on the camera?
@pyromaniac3542 ай бұрын
Yes. That will work if you want to be able to look behind while driving. Just won't automatically turn on when you are in reverse
@3719630005 ай бұрын
I put the camera on but it doesn't show the lines. How can I display the lines?
@oscarschiff91804 ай бұрын
On most cameras there a small seperate wires located on the video feed wire. Usually if you cut one, it will hive you lines. And if you cut the other one (if there a two) it will change video resolution or output type.
@Grysn07mc11 ай бұрын
I have led lights on camera, when I plug camera video cable to car multimedia head unit, car lights are on. camera working only in reverse mode with ignition, but lights not turning off when turning ignition off / removing key. what am i doing wrong / how can I fix it? thanks
@pyromaniac3542 ай бұрын
Sounds like you have hooked wire to a constant power wire that stays on all the time even if car key is removed from Ignition. You have to hook to a car power source that is only live when key is on acc
@Grysn07mc2 ай бұрын
@@pyromaniac354 thanks I will try it.
@orientaltiger38477 ай бұрын
Why do we need to solder the camera cord? Can’t it just be covered in tape?
@maha_sage7 ай бұрын
I think he means, call him.
@Stackleton4 ай бұрын
Can i eat the camera ?
@grantsmith85026 ай бұрын
Music what's going on how aerating ?????
@nikstudio1886Ай бұрын
Take out the music!
@SquishyTheVampireАй бұрын
I think I'll just hire someone....
@Christopher-xn8qk Жыл бұрын
Exhaustingly complicated I’ll pay an installer
@magnetictheory Жыл бұрын
Amen
@bradprice1668 Жыл бұрын
Im about 2 hours in, can confirm its not easy or an hour job
@ace1007 Жыл бұрын
I'm getting the wireless solar one..😢
@magnetictheory Жыл бұрын
@@ace1007 I posted for an auto electrician on Airtasker. Very satisfied and good price. He had two bags full of tools. He mounted the reverse cam perfectly dead centre and discreetly under an overhang above the number plate. Ran the cam wiring to the head unit through the cable that unlocks the boot. Completely hidden. Well worth the money to have it done professionally. Do not recommend DIY.
@libertyordeaf11 ай бұрын
I've installed four (two for myself, two for others) and it really depends on the make/model of the car and how easy things are to locate, route and move. Some can be done in 30 mins, others a lot longer.
@RetroEcoChicken4 ай бұрын
you could also just wrap the wire tight to the other wire, then use rubber electric tape and wrap it real tight.
@Incognito-turnip4 ай бұрын
Great video but that screen looks a bit 2004 not 2024
@davidedmundson84027 ай бұрын
To make sure that viewers can only make out every other word, just add annoying soundtrack.
@Overcaffenated8 ай бұрын
Hey! I didn't come here for the music! 😡
@jamesaustralian98292 күн бұрын
Why use a test light to find reverse light wire, when you have a nice convenient trailer plug.
@drgeoffrussellnem29136 ай бұрын
Great video, but that music is far too loud!
@sverrearnes77699 ай бұрын
Said with another words: Forget the shit! Or let some pros mount it for you.
@CharlieDErcole3 ай бұрын
Music isnt loud enough. 😄
@qasmb15469 ай бұрын
is it possible to connect it to the screen already in your car?
@nirhaber61498 ай бұрын
I don't believe so.
@mrredstonia7 ай бұрын
@@nirhaber6149It should be
@m33p125 ай бұрын
If your stereo head unit has an r-cam RCA port then you should be able to hook the camera up to it, as long as your camera and stereo are compatible.
@Jeffery9927 күн бұрын
Nice music video
@michaelkenny4124 Жыл бұрын
Just solder into your ignition wiring, yikes, no thanks!
@ozziadventurer10 ай бұрын
I agree, would you say there's another way around it i dont want to stuf up my ignition wires :)
@ratnavenkat76239 ай бұрын
Yes you can just crimp the wires together and apply heartshrink over it 😊
@UKBxnzh9 ай бұрын
@@ratnavenkat7623 Complete beginner, no idea what I'm doing so please forgive my ignorance. Would wrapping the wires together and covering with electrical tape work?
@turoterore89788 ай бұрын
i just joined in the fuse box
@taddio765 ай бұрын
Did that work just as well?@@turoterore8978
@Its3am Жыл бұрын
That’s not how to solder. “Tinning” is covering the cooper wires in solder. You should never carry the solder on the soldering iron.
@roofermarc111 ай бұрын
The soldering iron tip must be tinned. I think he meant that. You could also tin the wires and this will allow the solder to flow more freely.
@DyLemmaOG11 ай бұрын
Lol. He did the proper technique actually, that's what you're supposed to do!