Homemade plastic barrel standup fishing boat

Рет қаралды 73,749

Күн бұрын

Пікірлер

@LGautierSpence Жыл бұрын

Very cool! I would add foam in the outter barrels before inserting ice chests for added buoyancy incase of other boats speeding by and large wake fills them with water.

@nikolartwork1471 2 жыл бұрын

Was trying to think up some way to make an affordable aquatic bike and stumbled onto your channel, very inspired. Thanks for posting your designs.

@supergokue1 2 жыл бұрын

Cool, I'm glad you found some value here :)

@darrenbivings4227 2 жыл бұрын

I absolutely love this. I'm getting on this after my next paycheck. I would add one more thing to this construction: Some kind of Water impervious *Polyvinyl Chloride* Foam to make it virtually unsinkable. If those barrel pontoons take on water for any reason, the foam core will be your back-up to keeping you afloat.

@buffalodeb4495 2 жыл бұрын

I really like this one out of all your boats. Great job and enjoy your posts.

@supergokue1 2 жыл бұрын

Nice, I'm glad you liked this one the best. Thank you for the comment and the compliment :)

@notmydayjob3182 2 жыл бұрын

As always I’m amazed by your creations!!! Great job

@supergokue1 2 жыл бұрын

Thank you :)

@philliprude5997 Жыл бұрын

Awesome build, great video.

@supergokue1 Жыл бұрын

Thank you, glad you like it :)

@anthonyhendricks7377 5 ай бұрын

Interesting build.

@supergokue1 5 ай бұрын

It was a lot of fun :)

@АндрейПриходько-й2ы Жыл бұрын

For a boat with such stability, it will not be superfluous to learn the Eskimo Roll :)

@supergokue1 Жыл бұрын

@DIYBYSPiN Жыл бұрын

Wow. I love it.

@supergokue1 Жыл бұрын

Thank you, I appreciate that :)

@DavidD6969 Жыл бұрын

Looks like a lot of fun 👍

@supergokue1 Жыл бұрын

Yes it was, I'm think of making another one over here. Thank you for the comment.

@ervinwhite5522 Жыл бұрын

Nice job. I am going to attempt a similar project

@MakerPipe 2 жыл бұрын

Another amazing boat! Thanks for the shoutout!

@supergokue1 2 жыл бұрын

Any time, thanks for the great product :)

@timreiners5540 Жыл бұрын

For a nose cone on these have you ever looked at coroplast, you could take a sheet and roll it up and around the bottom and then tie together at the front in a V then leave top open. Very light weight as well. You could fasten to the front of eash barrel with screws or rivets.

@supergokue1 Жыл бұрын

I like it, thanks for the tip :)

@awbernardy 2 жыл бұрын

I think I need to build me one of these.. like this one here but being I am 6'2" and 260lbs I think 3 barrels on each side might be better for me ... I have a few smaller lakes that this would be so fun to take out on... rig up a fish finder like a Garmen Strike 4.. have some 10lbs anchors... could make a nice Crappie/Panfish boat

@shadomane 2 жыл бұрын

Very cool watercraft. Fun and interesting video. Thanks for the video and for sharing your thoughts and experience with us.

@supergokue1 2 жыл бұрын

My pleasure, I'm just glad people enjoy it :)

@rij8323 3 ай бұрын

Would this work if every drum was 55 gallons? Would that make it more buoyant? And does it change the strength of the motor required?

@samljer 5 ай бұрын

This one is a keeper IMO, but 2 more barrels on the back and WIN.

@asifhossain4048 7 ай бұрын

Good job

@supergokue1 7 ай бұрын

Thank you :)

@radamson1 Жыл бұрын

It would be a great help if you would include a material list and an idea of where to find the parts.

@supergokue1 Жыл бұрын

Thank you for the interest. Unfortunately, I no longer sell the material list. Thank you for understanding.

@richardwhitehead5069 4 ай бұрын

Im thinking of a similar frame idea tvat folds bk into a drum

@romeomike58 3 ай бұрын

❤❤❤ pourquoi ne pas mettre 3 tonneaux de chaque côté pour plus de stabilité et remplir le vide par la mousse expansive ?

@071453Baxter 2 жыл бұрын

Very NICE. Are plans available?

@supergokue1 2 жыл бұрын

Thank you for the compliment, but I will not be making any plans for this boat. Thank you for understanding.

@vidmo11 Жыл бұрын

Witaj . Super łódka. Jakiej grubości są ścianki tych rurek?

@supergokue1 Жыл бұрын

I used 1/2 in, 3/4 in, and 1 inch EMT for this project. Thanks for the question.

@ernstdh 2 жыл бұрын

Looks like you might needs a little weight in the front. I like it, great job.

@supergokue1 2 жыл бұрын

You are correct, I think I need to rearrange a few things. Thank you for the comment, I appreciate it :)

@dennismeehan6218 10 ай бұрын

Or a little less weight in the back.

@themattwheatley 2 жыл бұрын

Very inspirational✌🏻

@supergokue1 2 жыл бұрын

I like that, thank you :)

@collowood 5 ай бұрын

Wow great video just what I've been looking for. Thank so so much. Cheers Don ❤😊

@supergokue1 4 ай бұрын

Thank you :)

@robertfuenmayor2146 2 жыл бұрын

😁👍thanks for teaching...

@supergokue1 2 жыл бұрын

My pleasure, thanks for the comment.

@vidmo11 Жыл бұрын

Witaj. Jaką grubość mają ścianki rur EMT - 3 mm?

@supergokue1 Жыл бұрын

I had to look it up on google, the answer was a wall thickness of 0.042in or 1.07mm. Thank you for the question.

@G3N3S1D3GAMING 7 ай бұрын

Should have filled the side drums with foam gives u better buoyancy balance the cooler idea was great but u over killed it bro

@ReyGica-sr3wi 7 ай бұрын

What is your engine

@supergokue1 7 ай бұрын

That is a Minn Kota 55lb thrust trolling motor, thanks for the question.

@syahtech1616 2 жыл бұрын

When you open up the barrel, its floating ability will reduce alot,..

@LongWangHung6969 2 жыл бұрын

maybe one of those foam cylinders in the rear to keep the boat from going backwards like it did at the end

@supergokue1 2 жыл бұрын

Great idea, thanks for the tip :)

@nicolettekay7098 Жыл бұрын

Where did you find all the parts

@guyrollf8956 7 ай бұрын

I've noticed recently that many of these DIY videos are now putting up safety disclaimers telling viewers not to copy what you're building cause you're not an engineer or professional builder. How do you know if the people watching have an engineering kind of mind or not. I'm an Air Force veteran and was trained as an airframe repair specialist. We're told that we were being given a million dollar education. I used to repair, rebuild, and modify A-10's. You know, the aircraft known as "warthogs"? I can't help but feel a little insulted by these disclaimers telling me not to try and duplicate the things I see getting built. I actually do have engineering experience. And one of the most important things the military teaches is, "the mission first, safely". These words were written in five foot tall letters on one of the inner walls of the hanger that the airframe repair shop was part of. If there's one thing most important to me when it comes to working with my hands, it's safety first, always. Also, if someones sitting in their home watching you build something, how do you expect them not to be inspired by what they see you doing. Of course people might want to copy you, and if they don't know what they're doing, there's nothing you can do about it anyway. Even if they hurt themselves while trying to duplicate what you've built, again I say, there's nothing you can do about it. And all the disclaimers in the world are not going to change that fact. If someone smart copies you, then they can have fun on the water too. If someone stupid copies you, and they end up getting hurt or even worse dead, all of that stupid persons friends and family already know that they're stupid, and they are the ones who have the responsibility of stopping their stupid friend from copying what you build. Or at least I think that's the way the world should work. Just my opinion, and I'm allowed to have it.🖖😎👍

@romeomike58 3 ай бұрын

❤❤❤ bon travail

@mikegrant8490 Жыл бұрын

Five coolers, an electric motor that'll spin the boat... this will likely be a twenty five year commitment to "every day after work" and "all weekend, every weekend" fun....