How to Refill the Developer on Konica MFP

[@davidodediran716]

Your tutorial videos are top notch!I have Konica Minolta C452 the machine is telling me to replace imaging units Y M & C is this the same procedure?

[@Gmarkx]

Excellent vacuum machine. Is it on Amazon?

[@Alex_FR_IT]

is the one in the refill bag just standard toner? I cleaned up the developer on a different model/brand without knowing the developer assembly had to be refilled. thx

[@mohamedabdou2224]

This is the special iron powder for developer

[@Alex_FR_IT]

​@@mohamedabdou2224 yep thanks! Learnt just after that the powder is the developer, and the mechanical cylinder in which it goes is the developer UNIT.

[@ahsh999]

help help guys I have a Konica Minolta C280 machine I tried repeatedly to fill the magnet cylinder, but it never fills. All the Developer powder goes to the bottom. It does not stick to the magnet cylinder. I do not know the problem!? I stay for a long time but to no avail!?

[@Supertechs3]

Make sure you filled with developer and not toner.

[@kamurundiomi4081]

Can you train one about repairing this machine

[@marcinmorris]

Hello, thank you for that video. And what is the material you're filling the developer with? Is that just a regular toner?

[@janvanderwal2744]

No, it's no toner, he replaced the developer.. that's the carrier for the toner, toner is not developer..

[@xx3868]

Hi, do you know if the main memory 125mb for the 1690MF is like computer ram in that it doesant retain data in any way when switched off? The manual is a bit vague there.

[@franciscoantonioalasrol9838]

Where can we get the powder for C454?

[@casperakoma7273]

Thanks for the video. I would like to know if you suppose run developer setting F8 on this one?

[@graphiknoirstudio8267]

Big thank !

[@ahsh999]

Welcome How long does it take for the mag cylinder to be fully filled!? It took a long time, my hands got tired, and the magnet cylinder never got full!?

[@davidodediran716]

Where do I buy the all kits you used for this refurbishing, please?

[@Supertechs3]

we have some products here, our store is coming soon www.ebay.com/str/supertechsservices

[@davidodediran716]

@@Supertechs3 Thank you! I will surely patronize you!

[@ygen7047]

Please tell me why you need to change the chip on the drum if you do not change the drum itself.

[@Moepedi]

That the developer chip. If you don't change it it'll pop up the 2558 error code.

[@mikias]

Hi there, big fan of your channel. Wanted to ask a quick question. When do we need to replace developer? What signs on the print out should we look for?

[@Supertechs3]

Void marks in the image. You'll see one side is mode faded than the other. We recommend doing the whole imaging unit when this happens.

[@jackelinsevilla38]

Necesito tu ayuda

[@mojtabamalih44]