SureColor T-Series T7770D 44" CAD, Technical and Graphics Printer Full Product Tour | 5-23-2022

[@ranisoma3077]

for indoor photo how much year life&Durability

[@busterhyman6633]

If you have a dual roll system does the integrated catch basket catch output from both rolls or are there two catch baskets?

[@epsonamerica]

Hi, Buster - There is only one catch basket that works for both rolls.

[@firdamelinda-qp2er]

Aing nu nyien mah. Sia nge review hngkul

[@tareksahboo4885]

Good day I have problem in T7700 The lower roll not detected

[@Patrick94GSR]

how does the retractable basket work when printing a whole set of architectural drawings? I'm assuming the sheets don't come out laying flat stacked on each other, but would have to all be pulled out and arranged separately. That may be a deal breaker for us.

[@epsonamerica]

Thank you for your question. The “basket” is a piece of mesh cloth that sits in front of the printer (think of it as a rectangular hammock) when pulled out. Essentially, after every print job the printer will laterally cut the job off the roll and the print will land in the basket, not laying it flat, but rather, curved. All subsequent prints should land on top of each other in the basket.

[@Patrick94GSR]

@@epsonamerica you say “print job” but that’s actually every sheet. Is there any sort of separate out feed tray assembly that could go in front of this machine to capture sheets coming out flat?

[@epsonamerica]

@@Patrick94GSR - it comes with the printer and retracts into it. For a visual reference, take a look at the 6:20 mark of this KZbin Video in which Jacob, the product manager, explains how that works: kzbin.info/www/bejne/fp_ShIyFZad3gpo

[@Patrick94GSR]

@@epsonamerica right but it doesn't allow the sheets to come out flat and stack on top of each other. I'll be looking at one in person tomorrow and will determine if it works for my company's needs.

[@woodardhsd]

@@Patrick94GSR I'm really annoyed by the lack of a built-in stacker on nearly every large-format printer. Did you ever find a suitable plotter?

[@Lilgyrlie1]

@Epson America can this printer print on canvas, vinyl or Oak Tag?

[@epsonamerica]

Thank you for your question! Yes, The T7770D prints on Epson canvas: files.support.epson.com/docid/cpd6/cpd61762/source/pro_graphics/source/media_loading/reference/scp6570d_sct7770dl/paper_compatibility_us_scp6570d_sct7770dl.html As for Oak Tag, we have not tested Oak tag media and cannot guarantee its compatibility with the printer.

[@marissacruz3849]

Does this work with printable vinyl?

[@hemidesign]

Some companies (brands) does make printable vinyl for pigment printers like this Epson (not good for outdoor) Eco-Solvent printers (Roland, Mimaki and Mutoh) are much better than pigment for outdoor signage or signs for a long life..

[@MrExo_3D]

24" version?

[@epsonamerica]

Hi! Here is a 24" version epson.com/For-Work/Printers/Large-Format/SureColor-T2170-24-Inch-Wireless-Printer/p/SCT2170SR - you can view all our T-Series here epson.com/For-Work/Printers/Large-Format/c/w140?sort=name-asc&q=%3Aprice-asc%3AdiscontinuedFlag%3Afalse%3APro+Imaging+Facets%2CProfessional+Printer+Series%3ASureColor+T~102Series#scrollTgt_onRefresh

[@MrExo_3D]

@@epsonamerica Looking for T3770 as mentioned in video

[@epsonamerica]

@@MrExo_3D - Ah, yes! The T3770 is shipping in March 2023

[@harshascreation5560]

Hello... Can please share help how to customize drying time for custom media ?

[@epsonamerica]

Thank you for your question! While most Epson genuine medias are instant-dry, drying times vary for custom media widely depend on the custom media being used. Epson does not test all third party media so drying time is not guaranteed. But generally, if the custom media is compatible with inkjet - coated and uncoated media dry quickly. Polypropylene and Specialty CAD Medias like Vellum or Mylar can take a short moment of time to dry after they are printed - allowing a little time before you cut and use the print can be a good practice for those types.

[@harshascreation5560]

So if some one is using 3rd party canvas / photo media on Epson T7730D or T7770D and if he wants to customize the drying time what is the available utility from Epson can Epson Media Installer is helpful for this model ?

[@epsonamerica]

@@harshascreation5560 - Yes, Epson Media Installer will assist with what you are trying to achieve.

[@harshascreation5560]

@@epsonamerica i have tried but I could not able to see the drying time customize option when i tried to edit a media profile but copying it... Is it compatible with P900, P700, P9500 & P7500 only ?

[@harshascreation5560]

@@epsonamerica is there any manual or video help available of Epson Media Installer for T7730d / T7770d ?

[@ferencgyulafia9951]

HOW MUCH?

[@woodardhsd]

I guess nobody makes a plotter with a built-in stacker anymore? Who wants to organize and stack a bunch of individual rolled up sheets?

[@aestrov]

Nice

[@firdamelinda-qp2er]

Si lele eta housing na lalecet