Surprising secrets of a minimalist walk-in wardrobe

[@GrahamG-rm4jx]

A master at work 👍🏽

[@UmarIlyas-v2e]

I wish I would have a mentor like you. You are a genious

[@CAVjoinery]

Thanks for watching and commenting into my video 🙏🙏 hope you will get a lot of my videos and work hard to achieve your dreams soon

[@UmarIlyas-v2e]

@@CAVjoinery my wish is to come to see you and learn from you. thanx for wish me luck

[@stephenconnor9385]

I wish I had his skills,,love watching his channel😊

[@CAVjoinery]

thank you sir

[@tonedaflex]

Loving the safety crocs! Great job, as usual👍

[@CAVjoinery]

Thanks 👍 they were from customer i have to wear them as they have tarmac poured on yard

[@MikeNoce]

You would be worth a lot in the states working for someone like me. We use the never use particle board but your skills would translate to solid pretty well.

[@CAVjoinery]

Thank you for watching my video is commonly in the uk and in Europe in general has to do with the recycling policy we use a lot chipboards as they come in so many colours and finishes and nevertheless they cheap to buy

[@АнатолийКольцов-я3ю]

Привет из России.Приятно смотреть на профессионала.Пускаю слюни на инструмент!

[@CAVjoinery]

Thank you so much ☺️

[@ivanschultz1987]

Зелененькие подкладушки для фальшей это класс, я не думал что такое есть, буду себе делать. Ещё не думал, что рубанок по ДСП работает)))

[@jorge4384]

Saludos desde Argentina, excelente trabajo!! me suscribo

[@CAVjoinery]

Thanks so much for supporting us im in the uk 🇬🇧

[@bloggs692413]

top notch job mate

[@CAVjoinery]

Thanks so much

[@rihssty]

You’re just amazing. Learning so much from you. What are those little plastic green things you use? Thanks.

[@CAVjoinery]

So nice of youhere is an amazon link for them amzn.to/3rL9OVA

[@ErmiyasHadush-tm7cc]

Thanks for showing us it's amazing I'm i want learn furniture how many year it will take?

[@OleksiiNovokshonov]

Like your work. Question. I heard that one should always protect the cut surface. With lack or glue or edging. Otherwise it will take the moisture and also can stink due to the chemicals inside the board. Can you share what is your experience on this point. Thank you

[@CAVjoinery]

Well this goes to bedroom and then is not exposed edge so i think it should be fine actually if you look on kitchen caninets you will see same thing on all units only exposed edges have edging on an that is a kitchen i do not see any problem in doing that on wardrobes. Thanaks hope that makes sense !

[@jordilietos7869]

Saludos desde España, gran trabajo y muy profesional. Gracias

[@CAVjoinery]

Same from the uk 🇬🇧 thanks for watching

[@richardguiseley9945]

Good work as always love the white crocks very health and safety 😂

[@CAVjoinery]

Long story about them, whole garden dugout filled up with mud and gravel customer cried to get it on my feet 🤣🤣🤣

[@AdamHaigh-w4l]

What are those clips called you use for holding scribing panels while marking? Loving the vids learning some useful tips, currently transitioning from commercial to more domestic joinery

[@CAVjoinery]

Thanks they are called U-scribe jig

[@talleysuehohlfeld3959]

I would want those top edges edge-banded so a dust cloth won’t catch in the raw material.

[@CAVjoinery]

Thanks for watching can’t caching as they are tight to wall

[@talleysuehohlfeld3959]

@@CAVjoinery You could edge-band that panel before you bring it into the room to install.

[@rashidiarias]

​@@talleysuehohlfeld3959 ?

[@chrisduchnowski3757]

Fantastic work mate , pick up some tips from You 👍

[@CAVjoinery]

Thanks 👍glad to hear I can help 🙏🙏

[@richardwood4541]

Just watched this video and noticed your using the u scribe jigs which are great but what is the other green jig you are using please. Great job 👍🏻

[@CAVjoinery]

Check on my amazon link thanks 👉www.amazon.co.uk/shop/cavjoinery

[@Rui-on3yh]

Great work! Whats the name of that laser measure? Thanks

[@CAVjoinery]

Thx is called leica here is amazon link amzn.to/3BCxQ9Z

[@valerizhikhar7234]

This is great! And what are the models of cordless drill?

[@CAVjoinery]

Thanks here’s amazon links Impact drill amzn.to/48tcPtm drill amzn.to/3vbekhA

[@tamagavkletit]

Здравствуйте, очень нравятся ваша работа!!! Скажите пожалуйста,а когда заказ берёте у заказчика,вы сами на замер выезжаете?

[@CAVjoinery]

No we are a team so the survey guy does that

[@ferherres]

Do you prefer the adjustable legs more than a base frame? Honest question, I'm building a closet and want to know which one is better

[@CAVjoinery]

Base or legs is matter of how fitter will prefer they will hold the weight

[@72_a_]

Hi. I have a question . What is the name of the color of the furniture board from which you build the wardrobe? Best regards

[@CAVjoinery]

Hey is ROYAL OAK

[@snoggy75]

Amazing craftsmanship pal I was really enjoying this video till I saw the crocs 🤦🏼‍♂️😂

[@jorge4384]

que son los "crocs" ?

[@snoggy75]

@@jorge4384 crocs = shoes he is wearing

[@CAVjoinery]

😅😅😅thanks there were woks on yard pouring the tarmac so I left my safety boots out

[@MikeNoce]

Crocs are the best shoe for delicate and/or detailed interior finish work. They never ever mar. They are also super comfortable. I have two pairs of 400$ boots that are worn in and extremely comfortable and I choose crocs most of the time. I also am considerate when walking thru someone’s dwelling so I remove them when not in an active work area.

[@SkobarMaster]

Почему очень много мебели ставишь на черновой пол?

[@CAVjoinery]

What do you mean?

[@SkobarMaster]

@@CAVjoinery у нас в России принято ставить мебель только на готовый пол, плитка, ламинат. После окончания ремонта, а у вас на ещё не постеленный чистовой пол идет. С какой целью это делается?

[@neilprendergast1312]

Where do you purchase the panels from please? Can you supply a link? Thank you

[@CAVjoinery]

Delivered by home design but they are all overe royal oak called

[@neilprendergast1312]

@@CAVjoinery thank you - is that the place in Hull?

[@rudolphsiekiera7579]

Another good job ,and nice croc's 😂

[@CAVjoinery]

Thanks i been like forced to ware them by customer😅

[@rudolphsiekiera7579]

@@CAVjoinery You just started a new fashion ! 😉

[@CAVjoinery]

@@rudolphsiekiera7579 I’m not gonna lie I felt so good on those croc.s 😅

[@nikkarel515]

Where's Vivaldi? Loved the classical music..

[@CAVjoinery]

I can’t put on you is copy writing that music 🎶 sorry 😞

[@omarumana2049]

Great

[@CAVjoinery]

Thanks 🙏

[@Павел-ш3ц7ы]

Ты супер мастер! Подскажи пожалуйста как называется и где купить штуку, которая одевается на карандаш для неровности стены?

[@CAVjoinery]

Hey thanks a lot here is an amazon link for that tool amzn.to/486Yanw

[@TMi-q8d]

Where did you buy those green clips to attach to frame of gable? Also do you use screws to attach filler pieces?

[@CAVjoinery]

Find them in the video description no I used dominoes dowels

[@bevhales6951]

There’s always an expert on hand to offer an opinion, but I agree that being held tight against the wall; scribed so expertly and planed on the edges so there are no loose or rough sections - I think that’s more than enough. I’d suggest with the greatest of respect that the lady go and nitpick somewhere else.

[@CAVjoinery]

Tha is done much like a future in terms of design so it looks like a frame all around as customer wanted thanks

[@ИванИванов-й4т1л]

Подскажите как называется шаблон светло зелёного цвета для ругулировки вылета, весь интернет обыска не могу найти

[@CAVjoinery]

Here is amazon link sir amzn.to/3QKiCEM

[@albertojaramillo8915]

Hey mate! Thanks for the awesome install videos. Really like your work. I wanted to ask what is the name of the green tool you are using @2:46 to gauge the depht?

[@CAVjoinery]

Thank you for watching is caled MARGIN ,here’s my amazon link www.amazon.co.uk/shop/cavjoinery

[@Kuper133]

I've watched a lot of your videos and for some reason you're installing furniture and there's no finished floor in the room. How will builders make a floor under furniture? In Russia, first, a complete renovation of the room is done along with the floor, and only then furniture is installed. Well, only in rare cases before the repair..

[@ludovicmorel407]

Beau travail, mais pourquoi vous ne fabriquez pas les armoires plus grande pour être plus proche des murs et plafond ? L’intérêt de fabriquer c’est de s’affranchir des pièces de raccordement non ?

[@CAVjoinery]

I think is more for nice looking as wel when your filters are the same all around thanks for your thoughts

[@TMi-q8d]

Also the countersink bit is what brand?

[@CAVjoinery]

Festool you can find more in descriptions

[@shanesaunders2191]

Awesome work. What saw blades do you use? You have no chipping

[@CAVjoinery]

Thanks for watching 🙏 i use the red ones look on my amazon link👉amzn.to/3PEhQrk

[@user-nm7hg2nb7z]

Sehr tolle Handarbeit und ein super Ergebnis. Allerdings hat mir die Videobearbeitung nicht gefallen. Es werden viel zu lange einzelne Schritte gezeigt die sich wiederholen. Hier könnte man das Video definitiv kurzen und somit die Qualität erhöhen

[@CAVjoinery]

I know what are you saying but i am not a professional vidoeditor so i will get better with time thanks

[@eltonneves2449]

Gostaria saber onde encontro esse grampo que vc parafusa pra riscar os fechamentos

[@CAVjoinery]

They called bessye clamps

[@drilltowera]

Why do Crocs have holes?..........To allow along your dignity to pour out😅

[@CAVjoinery]

:))) I don’t know actually they were ginven to me by client as outside was tarmax pouring

[@gregkhatchatrian4918]

How do you attach cabinets to wall?

[@CAVjoinery]

Using rawl anchors m5 52 mm and wall units brackets

[@gregkhatchatrian4918]

@@CAVjoinery I’m assuming the walls are level where you’re from. We can’t do that it the US because of wood framing. Nothing is ever level or flat.

[@adamschubert9335]

3:18 5:10 What tools are that ? Can I get a link. Thanks

[@CAVjoinery]

Hey here is amazon link for thosee plastic tools amzn.to/3rL9OVA amzn.to/41RlZ0R

[@wjm1676]

Great work 👌🏻 how did you fix the fillers into place?

[@CAVjoinery]

Using dominoes or just screws

[@thomassampson3517]

How long typically does something like this take to do?

[@CAVjoinery]

One and half days but there are people finishing in one day,thanks watching 🙏

[@yavuzhocaoglu8568]

Do u have yoir own work shop or are u using some companies cutting services?

[@CAVjoinery]

I got my small shop but is so small i only do small jobs in my shop hopefully one day I’ll have a proper one

[@yavuzhocaoglu8568]

@@CAVjoinery do u mind if I asked you which company is cutting services are u using I am going to open my work shop in soon if you living araound north london happy for meet with you

[@CAVjoinery]

@@yavuzhocaoglu8568 im based in Sheffield im using a medium business called HOME DESIGN

[@_PATRYCJUSZ]

what kind of hammer is that?

[@CAVjoinery]

Mallet made by me 7 years ago,thanks for watching

[@_PATRYCJUSZ]

@@CAVjoinery Do you use such a drill and screws? Festool 492523 3.5mm, Wurth assy plus 4x50? What kind of feet do you use? What board did you use for the base?

[@Dima..S]

Я думаю, чем сосед 5 ый день занимается...)

[@CAVjoinery]

Ask them :))

[@ohsnapDREX]

Imagine a life with no caulk

[@CAVjoinery]

Yeah wonderful 🤣

[@frankmorris2870]

Sorry I am a non believer, caulk done right gives that Finishing Touch. Love the work do

[@kareemdizai7590]

Possible to have the reference of the wedge 18, 22 etc....thanks

[@CAVjoinery]

Have a look here thanks 🙏 amzn.to/45613DW

[@joseluispereiraramos2722]

Buenos zapatos de seguridad calzas jajajaja

[@CAVjoinery]

🤣🤣🤣the were pour tarmac so i had to leave mine outside

[@gmltn6173]

초록색 제품좀 알수 있을까요

[@CAVjoinery]

Is a depth setting tool that helps you set panel precisely relative to the carcass from 0 mm to 25mm every 1mm here is my amazon affiliate link amzn.to/46AwxTy

[@manjitsohal3276]

Great job please put a plastic bits phone number where you can get them thanks.

[@CAVjoinery]

What plastic?

[@AdamHaigh-w4l]

What are those clips called you use for holding scribing panels while marking? Loving the vids learning some useful tips, currently transitioning from commercial to more domestic joinery

[@6shaneyG9]

U-scribe, Google it. They are very good

[@CAVjoinery]

This is my amazon link so you can have a look on them thanks 🙏 amzn.to/3DRCfni